Duplex LaserJet 1102w

Similar Questions

• HP LaserJet 1102w paper tray error message

  Recently my LaserJet 1102w ceased to duplex print. Instead, after printing the first side, it gives an error message: feeder must be filled.

  The bin is full, but I can't continue to print on the other side, no matter what.  It has become a huge problem, even when printing jobs front.

  Any ideas?

  Hello

  Once you replace the pages in the feeder, try to opening and closing the door of access to the cartridge page Word the print job and check whether that prints on the other side.

  Hope that helps,

  Shlomi

• LaserJet pro p 1102w: laserjet 1102w pro p

  You just bought a new laserjet 1102w pro p. It installed very well and prints, but it allows you to select a startup infallibly and executes the rolls of food every 15 seconds. I guess that the engine burn eventually if it maintains this doing.

  I rebooted it, unplugged the usb and removed and reinstalled the toner, but happening again all day.

  Is this s factory default?

  Hello @ cozjason,

  Welcome to the HP forum.

  I understand that your new laserjet 1102w P continues to go the beginning upward.

  I want to help you with this.

  LaserJet printers can be 'finiky' when they do not receive adequate food.

  Your printer is connected directly to a wall outlet?

  If it is connected to a surge protector or power bar, I would remove them from the printer.

  If the printer is plugged directly into a wall outlet, then I would try the reset that I sent you.

  Click on the little envelope in the upper right of your screen to retrieve the message.

  If that does not clear the issue would call technical support. They will be able to determine if there is a problem with the printer and replace the device under warranty.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• LaserJet 1102W Pro - can't get the blue light at all

  I do the initial installation of a Pro LaserJet 1102W.  I created another without difficulty.  After a reset to the default values and an update of the firmware, I can not even a flashing blue light indicating the necessary wireless configuration.  Tried with and without USB cable.  I get the status lights will blink for 10 seconds and then back to solid green light.  I tell myself that I need the blue light blinks then I can connect via Wi - Fi to set up.

  I believe on this model if you press the wireless to the printer and the (protected web configuration) WPS button our router that they should connect automatically. Then, you can use the installation package and the type of connection appropreiate for the printer on the computer.

  Is there anything else that could help you?

  Happy holidays!

• HP Laserjet 1102w: my HP LaserJet 1102w not print large documents via wifi

  Hello, I have two HP LaserJet 1102w news. I installed and configured via the wi fi and it the test page prints correctly.

  The problem is when I try to print large documents (with more than 400 KB). In this case the printer says "print...". "and in the printer, the green light flashes but not print the document. If I print small documents, it works OK.

  If I do a ping to the printer with packages of more than 8 000 bytes, I get 'timeout for this request. If I do a ping with packets of 8 000 bytes, I get the answer in 5-6 ms.

  Both printers has the same problem. I have different devices connected to the local network, and it all works well. I have another printer that works well with large documents... so the problem is not the configuration LAN or WiFi.

  What can I do? Thank you!

  Well, I solved the problem.

  I'm going to 'devices and printers-> right click on the printer-> properties-> Advanced tab printer' and check 'installed the driver. In my case, there is no "HP LaserJet 1102w", who is the best driver. So I remove the device and has installed, and I get the right driver "HP LaserJet 1102w.

  Now the printer works OK.

• LaserJet 1102W: HP1102w network connection

  I bought a Laserjet 1102W to connect to a wireless network in a home to the Portugal.  This network is provided by a router Huawei 4 G and the printer will not connect to this topic - is there a solution?

  Hi GraemeM1,

  Try this to connect using WPS

  1. press the button of the router WPS (if you do not have this button, you need to access the router configuration: lots of info online)
  2. press the button on the printer and a blue light wireless flashes repeatedly
  3. When you get a solid blue light your printer is connected to the network

  Hope this helps.

• Problems with nine LaserJet 1102w

  I've had my LaserJet 1102w for two days now, and I'm so far regretting buying and considering it return.  Here's why:

  1. it turns off automatically after 10 minutes and do not print after that until someone manually pushed the power button.

  2. when it is turned on, it will display only the first inch of a given page (Config test included integrated page), then it is the orange light flashes.  If you stop and then turn it on again, try again, and then turn market a SECOND time, it will print normally.

  3. it consisitantly fails to print "big" files (I quote because he isn't that great... i.e. a 32 MB PDF)-they gets stuck and require a complete restart of the printer.

  Is the only issue that I don't see to have fall wireless... which is good because we have not ALL wired devices in our House (which is why I bought this printer... most of the devices are iOS, but I'm working on Win7 laptop at the moment).

  I would love some advice or help get this printer to work.

  Thank you!

  * EDIT: I did so, it is updated the firmware lasted and I use the driver to date, both gets on the HP site.

  This looks like a problem with the mode 'sleep' on the printer.  There are a few things you can do to try and fix this problem.  First of all, make sure that the printer is connected directly to a wall outlet.  If you plug it into a surge arrester, power strip, or rescued food, it can prevent the printer to get enough power.  If this is correct, then proceed to try the steps in the document following the link.  If nothing works, contact HP to see on a replacement printer, or return the printer to where you bought it, be it, you need to replace the printer.

  The printer will not turn on or respond

• deaf new laserjet 1102w made noise when printing

  I just bought a laserjet 1102w to replace an old laserjet 1002. The fact 1102w one muffled loud noise every time it well a piece of paper causing the Office to shake.  Is this normal with this printer now or make me a defective printer?

  Hey Stafic,

  I would like to go ahead and launch HP Hardware Diagnostic Utility to see if it is able to determine if there are hardware problems. You can download the tool here: HP Hardware Diagnostic Utility

  Run the tool and post back with updates.

  Thank you

  Sean

• Configuration for Laserjet 1102w HTML page does not allow me to enter NETWORK tab

  try to install Laserjet 1102W, but can not enter the NETWORK tab on the HTML th Configurator. Simply does nothing.

  Only part that meets in the Configurator is the left side panel for more INFORMATION. Help!

  It can also be useful (especially step 4) if you use Mac... http://support.HP.com/us-en/document/c02020336

  Good luck

  Lagunak

  I work for HP but my messages and responses are mine.

• Multi-page printing on Laserjet 1102w

  I use a HP Laserjet Pro printer of 1102w wireless on a home network.  The operating system is Windows 7 (64-bit).  A computer print very well and the other prints multiple pages of a single page document.  I checked the settings and I can not just understand what is the cause.  I tried to uninstall the printer and the software and reinstalled.  He moved so easily and that a page will be printed when you do a test page, but if I print from Word, I get as much as 50 and as low as 10, but never just.

  If someone is familiar with this printing problem, please get back to me as soon as possible.

  Thank you!

  Hi, on the computer that prints multiple copies

  go to devices and printers

  Right-click on the icon of the 1102w printer

  Printer properties

  Ports

  Uncheck the box "enable bidirectional support".

  Click APPLY

• Mac OS x print duplex LaserJet Pro 200 M276nw

  I recently bought the HP LaserJet Pro 200 M276nw understand that I would be able to do manual duplex printing. However, after reviewing the instructions in the manual and try to understand through various blogs I can't always manually duplex.

  The instructions say that I'll be able to select manual duplex in the finishing menu under Print... However, there is no such menu for me on any program and the "double option" is grayed out. Please advise otherwise I might have to return the printer to find something that will work with printing recto verso or auto manual.

  Hi wegotjoy,

  I see by your post that you are unable to print double-sided on your Mac.

  Check the name of the driver that is installed by the printer. Airprint driver could be installed instead of the printer driver. (usually by default, Airprint)

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen should display the name.

  If the name of the printer indicates Airprint, then it of the Apple drivers, remove it and add the name of the printer back in the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Now try and print both sides.

  On the file menu, click print .

  Open the final menu and click the Manual Duplex or open the Manual Duplex

  menu.

  Click the Manual Duplex check box and select a binding option.

  Click the print button. Follow the instructions in the pop-up window that appears on the computer

  screen before the battery of exit in Tray 1 to print the second half.

  If the problem persists, then download and install the printer driver to see if that will solve the problem.

  Printer HP v.2.16.1 for OS X drivers.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  What is the printer name show?

  Please provide detailed results if you're still having problems.

  Have a wonderful day!
  Thank you.

• New range of printers HP laserjet 1102w

  I just installed my HP laserjet pro P1102w printer.  It will not print a test page or anything else.  The docs are in the queue.  I finally reached the support staff, we have downloaded drivers, etc..  Has been disconnected from the support staff.  I'm so frustrated.  If the printer does not print a test page to what it means?

  Help, please.  Thank you.  Eleanor

  Hi Eleanor,.

  (1) Windows operating system you are using?

  (2) have you tried to install the downloaded drivers?

  (3) you receive an error?

  Reference:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: Please choose the operating system accordingly.

  Let us know if that helps.

• HP Laserjet 1102w connects to the network but can't find any computer

  Hey guys;

  I recently got a router D-LINK DSL-2570U. I tried to install my printer 1102w on the network that has been a success, but at the last stage, I get this error:

  The printer has been able to connect to the network wireless using the wireless identification information.  However, this computer is unable to communicate with the printer.

  Please check that the printer is on the same network as this computer, and if you use WEP, check that the credentials have been entered correctly and try again.

  I have not had any problems with my printer while I was with Linksys router wag120 (my back). Since my new router has many more available parameters, is there any kind of specific settings that I need to put?

  I'm on windows 8.1.

  No matter how appreciated helpis.

  Thanks a lot Gemini02

  I followed your instructions but still no joy! Non of them worked for me!

  But then I came across sollution by chance!

  New routers offer a wide range of parameters that must be set manually!

  There is an SNMP option in the configuration page of the router that should be enabled so that you can get in touch with other devices on the wireless network!

  That's all! I allowed him and everything works fine!

• LaserJet 1102w: force print the second page, Laserjet 1102w

  Hello

  New laptop.  I can print fine from the front.  When I try to print double-sided printer, as normal stop, after that the first page is complete, but used 'popup' support to continue does not appear.  OK, I'm working on this one.  But is it possible that I can press something on the printer to say "go ahead, print the second page."?

  Thank you!

  Evan

  Hello @evanmjones,

  It is a great place to get help! I read your post and see that you do not get the option "Continue" to print the second when the double-sided page. I want to help you solve this problem.

  You can continue the second page by opening and closing the printer cover. (this model does not have a resume button)

  Make sure that manual duplex printing option is selected from the printer driver:

  1. Click on the Windows icon (), and then click devices and printers.

  2. Right click on the HP product and then click on printerProperties.

  3. Click the device settings tab.

  4. The manual Duplex allows to "Enabled" and click OK to save the change. (click on the + to expand the list)

  Ensure that the bidirectional Support is enabled.

  Go to start, devices and printers, right click on the printer, the printer properties, click the Ports tab, put a check mark next to allow bidirectional support.

  You may have to restart the computer.

  Try to print again.

  If you're still having problems, try printing from another application to see if you have the same results, it could be a setting in the application of double-sided printing.

  You need to maybe uninstall and reinstall the printer if the problem persists.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• Installed the wrong update of Firmware for my HP Laserjet 1102w

  There are two updates of firmware for the HP 1102w. An upgrade of the printer with Eprint mobile printing, and the other upgrades the printer with AirPrint services. Of course, I installed the wrong (eprint) and now the update of the firmware for AirPrint will not be installed because it says that the firmware is up to date. Does anyone know how to restore the firmware so that I can install the firmware with the features I want?

  Hello

  Any firmware update providing the last additional functionality and any previous firmware fixes as well.

  The latest firmware is version 20110826.

  Please print a configuration page holding the Cancel button for several seconds.

  I think that you should have the latest firmware now and should be able to use the Airprint feature.

  Check that your printer is connected to the same network of your iDevice and following the steps below:

  http://support.HP.com/us-en/document/c02623193

  Please let me know of any questions,

  Shlomi