dvd tray opens... car needs

Similar Questions

• The door on the DVD tray opens when you press the button. Aspire AX3300

  How the DVD tray are accessible when the door does not open? Anyone know?

  There the media stuck in drive?

  You may need to press the trombone quite difficult in the slot to manually move the mechanism to jump the door from the outside.

  Then once its release a bit, you can hang at the front of the car and pull.

  If there is some media stuck and remove you it... try to press the button to close the player.

• DVD tray opens on the Satellite C650

  Hello

  I'm sorry if this question has been posted before, but I can't get my DVD tray to open without having to stick something in the small space. When I try and open it normally, a little light beside the button just flashes orange.

  How to solve this?

  Thank you

  Is a CD or DVD inside when you try to open it?

  Almost every player's EJECT open the optical disc drive. Have you tried to use this option in your favorite player? It works correctly?

• The CD/DVD tray on my eMachinesT3616 will not open.

  The CD/DVD tray on my eMachines T3616 will not open.  Solution?

  Hello

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ===========================================================

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite C - DVD tray does not open properly

  My Satellite C DVD tray does not open properly. It opens only after several times.

  Can someone help to solve the problem?

  Thank you very much
  Dalug22

  Please check this thread:
  https://Forum.Toshiba.EU/showthread.php?82344

  The ODD (optical disc) contains a small ejection hole. You can insert an object like a paper clip to open the ODD plateau

• CD/DVD not opening tray

  Hi, I have a new R61 and I was wondering if anyone else had a problem with the opening of the CD/DVD tray.  The eject button works maybe 1 in 10 times.  Other times I have to shake out with the nails.  Otherwise, works perfectly.  Also is not really feel that it fits properly - it could be just aesthetic or bad installation/alignment.

  See you soon

  David.

  David, welcome to the forum,

  DJH says:

  .. Snip...

  That could be just aesthetic or bad installation/alignment.

  The first thing I would try is reinstalling the player, instructions on how to do this can be found here.

  Even if you chase him check it against the list of readers to the bootom of this site, may be that it is assigned a known issue.

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• I have can´t open the version of 30 days for photoshop cc2014. Windows tell you car needs windows 7 or 8, but I have windows 7...

  I have can´t open the version of 30 days for photoshop cc2014. Windows tell you car needs windows 7 or 8, but I have windows 7...

  The requirement is: Microsoft® Windows® 7 with Service Pack 1, Windows 8 or 8.1 Windows

  Do you have SP1 for Windows 7?

• CDROM and DVD report D:/not accessible win2k sp4 on new installation and trays open at startup

  Just installed Win2K an old pc with w2k being what came with it originally.

  Found problem when multiple upgrade files have been placed on a CD - R and then put in the CD on a new installation, and immediately it says D: / is not accessible and I think it says "service not taken in charge.

  Sought, and it was suggested to simply eject the disc and try later.  This does not solve it. And not 3rd party software, at all.    Installed nero 6, CD works fine with a disc recorded in trade, such as the Windows 2000 installation disc;  But apparently a disc recorded from another pc, with Vista using the option to make a data disc in the Explorer of

  After searching and trying several fixes, and read how others have tried but not corrected, Im trying to find the solution?

  And what happens at the start, both players, CD and DVD just open doors / ejection by themselves.

  During shutdown, the INCD app crashes and wont let close, but with or without nero or 3rd applications, the CD/DVD does not read a disc that I did.

  A suggestion said to check that the registry HKLM... but the specified folder was not there yet.  Now I know how explore feels.

  Ive searched but I'm still trying to find an exact solution for this, it's a pc to give to someone for Christmas

  
  

  Don't forget about power of Attorney

  Hi Brad,

  Windows 2000 issue you posted is better suited for the IT Pro TechNet public. Please ask your question in the Site Web of TechCenter Windows Client for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD dvd tray problem

  Im having a problem with the CD/DVD tray. How to solve this problem. Thank you.  It opens and then closes. What should do?

  Hello

  If you have not restarted the computer, please do so now as that often solves the problem.

  To open the player manually - for readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ==============================================================

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• CD/DVD tray is not working properly

  CD/DVD tray sometimes won't open.  When I push the button, tray slides in just a bit and then closes.  Little light also flashes once or twice.  This happens when I use the button on the tower and when I try to open the tray using the mouse control.  Discs seem to work very well when I get the drawer open.  Any ideas?  Thank you for your response the sentence to a man of 62 with little computer experience can understand it.

  Thank you!

  It is most likely a mechanical problem, having nothing to do with Windows itself. The gears are plastic nowadays, controlling them the opening/closing of the drawer can be (probably are!) worn and sometimes jamming because of this. If this is the case, it will worsen. You have 3 options: 1) Baby it, 2) replace the drive, 3) fully replace the computer.

• Acer TimelineU M5 - 481 T - 6642 Ultrabook of 14 inches. CD/DVD tray when it starts up and stop noise?

  I recently bought an Acer TimelineU M5 - 481 T-6642 14 inch Ultrabook.  During startup and shutdown, there is the CD/DVD tray noise as if the status bar is trying to open. I did not a CD or a DVD in the tray again.  How can I stop this sound action, annoying in my new ultrabook?  Thank you.

  Mine makes no noise noticeable at startup or another so I would get the extract.

• 'Open the drawer out press ok' message with the tray open output and pressed OK.

  'Open the drawer out press ok' message with the tray open output and pressed OK. Seems that the device does not believe that the drawer is open. This has happened directly after deletion of a paper jam.

  Sometimes a small part being out of alignment can make a sensor turn off inside the printer, so make sure you put everything back together right first.  Although you to act this way, looks at the printer closely for any broken pieces.  If you do not see what has obviously broken, try to do a hard reset.  Instructions that are below.  If the hard reset does not clear the error, the output bin sensor may be broken.  If this is the case, you will need to get a new printer, as the sensor is not repairable.

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• CD/DVD tray

  How can I open the cd/dvd tray on my new g6 pavilion laptop running windows 7 to insert a disk

  douglas424 wrote

  How can I open the cd/dvd tray on my new g6 pavilion laptop running windows 7 to insert a disk

  Hello

  Just press a little button like on this picture

  

  Kind regards

• CD/DVD player open on its own - Equium L40

  Hello

  I have a laptop Equium L40-10 X recently purchased from Pc World. It has been working fine until recently my reader of cd/dvd broke open on its own. I closed it and then about 10 minutes later he did it again. This happens from time to time. After some research I found that it could be a problem of spyware. Scanned and deleted all traces etc. Problem seemed to have disappeared, but alas, the disc once more burst open.

  Recently the drive does not read disks as well. It seems to work when it wants at any time from 10 seconds up to an hour at a time. Things became an own mind... and when it doesn't, the button to open the player doesnâ? t seem to work. I have to use a paper clip to open the player.

  I have a laptop haunted or there is something wrong.

  Did someone has had an experience of something like it before or give me advice on what to do?

  Thank you, Jon.

  Hi mate

  I didn't noticed anything like this before, but I assume that it s a mechanical problem.
  Don t think that 3rd party software (program, spyware, virus, etc.) could cause this problem.
  In addition, you said that the drive does not read disks as well.

  In this case, I would recommend contacting the ASP in your country and ask for the disc and if necessary audit for a replacement disk WEIRD.

  If the warranty is valid replacement should be done for free.

  Best regards