Editing a scanned image

Similar Questions

• Amendment of the text of the scanned image. I want the same text font and size.

  Hello, I was wondering if it was possible to edit an image scanned with the text on the subject. I want to replace/remove/change the text on my scanned image but I want it to be the exact same font and size and color. Color should be easy enough. But how can I do other things? Also, is there a way to simply copy the bottom of my scanned image and get rid of all the other stuff on it? Thanks to all who help.

  If the site does not recognize fonts, you may be able to illuminate the background.  You can use Image - adjust - curves both illuminate the background and obscure the text, end up with something like this:

  

  But you don't really have to go to WhatTheFont.com for this one...  It's pretty clear the font Arial Windows (I recognized immediately)...  Looks to be about 20 points in size.  You can either use the variant "BOLD" to the police, or the fake fat Photoshop character Panel feature which seems to be a closer match:

  

  -Christmas

• HP MFP M277 dw: scanned image is not horizontal

  Hello

  I have problems with scanning.

  The scanned image is not right, not horizontal, the image / lines slightly tilting. The right of a line that is slightly below the line on the left. Looks like the book was a little twisted, but it's not. The left and right margins are straight and vertical, but the lines is tilted slightly.

  This occurs regardless whether I put the paper on the glass or using the paper feeder.

  My MFP is almost new, and this problem has happened all the time.

  / Paul

  @Paul_Sund

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you have not already done so, try setting "Calibrate" to help improve performance.

  The User Guideexplains the procedure on Page 121

  Calibrate the product in order to harmonize colors
  Calibration is a function of product that optimizes print quality.
  Follow these steps to solve the problems of quality of printing such as misaligned color, shadows, fuzzy graphics or other color print quality problems.
  1. on the product control panel, press the Setup button.

  2. open the following menus:
  ● System Configuration
  ● print quality
  Color calibration ●
  ● Calibrate now

  3. a calibration message appears on the control panel of the product. The calibration process takes a few minutes to complete. Do not turn off the product until the end of the calibration process.

  4 wait until the product is calibrated and then try to print again.

  

  If nothing helps, I suggest that you contact HP Support.

  Explain the problem and ask for options / help.

  HP Contact Information - sales, Technical Support, other Contacts - USA / Canada

  Fill out the form to receive the case number and Contact information

  Contact HP support - USA-

  Contact HP - including UK information

  HP technical support / Service delivery - some English Speaking countries

  HP global support

  Warranty check

  HP customer support - product warranty check

  Plans of optional guarantees:

  Enter your product number in the screen to view the different warranty plans available for this system:

  Care Pack Central

  Definitions (file may be slow to load in Firefox - Edge is faster...):

  Definitions of Care Pack Services

  HP Services to consumers (Service purchase information)

  1-866-724-8600

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• Preview of the scanned image is good but once saved image is black with horizontal lines

  My OS is: OSX 10.9.3

  I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.

  Print is good.

  Copy is good.

  But now I have some analysis of the issues, probably due to an update of the OS.

  Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.

  I rumaged through the forums and you have not yet found a solution to my specific machine.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  Scan using the software provided as Capture of Image or preview.

  The application of scanning HP for your printer is not available to 10.9, you use incompatible software.

  Follow these steps to get the results of the analysis required:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• HP 6510 - areas shaded on scanned images

  When I scan an image or document using a HP 6510 scanned images are dark and shaded areas along the vertical edges of the completed scans. The cover is closed all the way and the shadows are not part of the original image/document. What could cause this problem and how to fix it?

  I have scanned hundreds of images with a C5280 printer/scanner and never had any problems with it. Since I bought the 6510, I didn't have problems with it, it's a true lemon IMO. Does anyone know if HP is planning a recall on this model?

  Resolved: The problem proved to be the scanner cover. It allows a small amount of light to enter along the edge of the hinge. After you verify that the lid has been correctly installed (tabs of hinge in place and the lid placed correctly in addition to glass) I found that putting something, like a book or my hand on top of the lid while the machine is scanning has solved the problem.
  
  I miss my old HP Photosmart C5280.

• Photosmart 7515 adds lines from bottom of the scanned image

  My photosmart 7515 started just add a line double about 2 inches from the left edge of all of the scanned images. NO modification of the system that I am aware. Prins computer or internet as usual. Any ideas?

  Hi Bobvan1,

  Welcome to the Forums of HP Support! I see when you scan with your HP Photosmart 7515 he started to add a double line about 2 inches from the left edge.

  I would like that you start here: vertical, lines or streaks in the Copies or Scans, please fill ALL troubleshooting steps, focusing on cleaning.

  Let me know the results, I'll watch for your reply.

  Thank you

• Part of the image appears in the scanned image

  I have an officejet 6600 all-in-one printer.  Lately, whenever I try to scan the image is cut off.  Only a small part of the document appears in the final image.  The content is visible on the scanned image is in the lower right of the scanning space.  Please tell us what the steps should I take to solve this problem.  Thank you

  Hello Pierre,

  Welcome to the Forums of HP Support!

  I see you are trying to scan documents using your HP Officejet 6600, how ever you getting only a very small part of the analysis. What happens when you try to make a copy, the entire page produce on the copy?

  If the HP software, make sure that the scan size is set to sweep the area.

• i MAC mid 2011: error saving a scanned image by choosing Documents with text... the drop-down list of Preset MAC

  When I scan a text document and try to save it as a PDF, I get the error message "could not save scanned image.

  If I use parameters for general use, it records OK.  Any thoughts?

  Hello

  HP Easy Scan provides not less features HP Scan, this is a later version of the software.

  It provides the same functionality, such as capabilities, OCR, Image detection, scanning front panel and other capablities supplied by HP Scan.

  You can also install more HP Scan and test it, the current application will remain on your Mac.

• line on scanned image

  I have an Officejet 6500 has more all-in-one. The machine works fine except for one question.

  When you are scanning from the document feeder only, all scanned images leave a thin black line running vertically down the page, exactly 1 inch from the right side. If the same page is analyzed by putting it on the flat, no line appears.

  Just to confirm, is this normal? And if not, what is the solution?

  Art

  Could not resolve the problem after the documents you pointed me to

  Called HP support

  The problem has been resolved by unplugging the printer/scanner to the surge protector power bar and plug directly into the wall outlet

  Very strange, but he has apparently solved the problem

  Art

• How can I edit a scanned document using word processing software

  The printer is a Deskjet 3052 a, OS = Vista,

  I would like to know how to edit a scanned document using a word processor (ms Word).  Or do I need OCR software that came with the printer.

  Hello

  You use an OCR module, it is not included with the printer software.

  Personally, I know that Read IRIS offer good performance, you can check the web for any other.

• Photosmart All In One C410: Unable to save the scanned images

  I have a Mac with 10.11.1 and a HP c410 printer/Scanner.

  I can scan to the computer, but when I try to save in file I get the error message

  "Could not save the scanned images.

  It is the first time that I scanned because I upgraded to El Capitan, and I see that the scanner instructions have changed.  I can send the page scanned to the printer, but I can't save file so I can send by e-mail.

  Hello

  What application you scan currently?

  Can you save successfully scan using the HP Easy Scan application below?

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

• HP ENVY 4500: Scanned image appears in several parts of the whole.

  Hi people, for convenience, I'm going to number paragraphs describing my problem.

  1. any new product, which was to install a couple of days.

  2. the product prints and copy great and no problems. However, although yesterday I scanned a picture OK, now not so much.

  3. I hate to admit it, but I am 81 and my memory is not so great. Perhaps, I do not use the Protocol? Here are the details of the problem:

  4. when I scan using the screen of the printer the printer allows to scan that a good connection to my computer and an appropriate message is displayed on the monitor screen "Scanning". When parsing the result image is sent to the 'Documents '. So far, good.

  5. what analyzes all the I go to Documents and find the split image in ten 10 or more separate items and it would be a major task using PES or similar to the room together. In any case, would not be a solution, the photo scanning in a room, that's what I'm aiming for.

  6 but it is not the end of the problem. When I scan using the computer all scans correctly and is displayed in the preview window, which appeared on my screen. But the 'same' problem persists as above and the scanned image in appear in 10 or more parts at all.

  7. I don't think that there is nothing wrong with the product, rather I strongly suspect that I'm doing something wrong or maybe I misconfigured Setup.

  How can I fix this problem? What should I do to scan photos and documents as an image or a document and not 10?

  I'll be very grateful to help on this problem. Thank you very much. If you need more information, please just ask.

  Stehkoyeh.

  What follows is HPENVY4500 all_in_one printer, scanner, copier and fax. Professor, thank you very much for your help. However, I managed to fix my situation with the changes as follows:

  1. in the hp/scan utility on the computer. I clicked on the Scan of the computer and then the change analysis tasks...

  2. This was brought up in a popup window. I then put 'photo jpeg' highlight and click on modify.

  3. This brought another window. This is the important part. I've changed the menu presets "Photos, graphics, etc." and then that immediately under this Type 'exit' I've changed to read JPEG.

  4. everything that sounds very complex and I know I got lucky to fall on this procedure, because I'm good technically not for sure!

  However, the procedure above fixed my problem and my scans to and from the computer using Direct and wireless network were quite normal and very good. The scans are clear and bright and crisp colors. I am now very happy.

  As for the solution "self-cultivation", I'll certainly store that is far away and use it if you need. Although it was not necessary for my problem now, it's a very important protocol worth remembering.

• Can't print or scan images after the installation of the Mavericks on iMac

  Has anyone installed upgrading Maverick and then tried to Scan.  The scan works OK, you can see the scanned image, but when you save it, either as a JPEG image or a PDF file, it's just a number of lines. If you print it, just a page full of ink.  Must be the same on my wifes iMac such Maverick.

  I have exactly the same problem.  Spoke with Apple and worked around the problem by using the screenshot on the Mac.  They said that hp needs updated driver to resolve the problem.

• editing of scanned file

  Hello

  I can't edit a scanned file.

  I have signed and have an annual subscription will however when I open a file to retrieve and delete unwanted pages he does give me not the option in tools. He asks me to sign in. when I connect, it asks me to register for another subscription!

  can you please help me or provide me with a number that can help!

  What are you exactly subscribed to? You need Adobe Acrobat to edit a PDF in a meaningful way.