Electricity taken my Tecra M2 is broken

Similar Questions

• Tecra 8100 not start after replacing hinge!

  A few days ago and hinges on my Tecra 8100 receive broken - I had to take full-fledged laptop and replace the hinges. When I finished replacement and try to start, I have nothing on the screen. LED light diodes are to: power, battery, CD ROM (there are no leads to the HARD drive).
  I must put emphasis that I had the problem with the locations of memory (from last year) and I solved this problem by sticking a piece of paper between the contacts (like everyone else).

  Hello

  Who knows what you were doing. It seems at first glance that you plugged the screen isn't properly.
  But it could also be something wrong with the memory banks.

  It s not advisable to put anything between the memory and the housing contacts!
  If you use the compatible memory modules, everything should work properly!

  If you are not able to locate the failure I recommend to contact a technician who has more experience in the repair of laptop as a common user like you and me

• PC won't turn on after that heating is triggered off the coast

  I knew better than that, but was cold and could not get any other energy sources in the room.

  Connected to my HP Pavilion all-in-One (Windows 7), include I - couple additional HDs, 2 printers (because my wireless HP printer jam printer again and made a clicking noise when you send something to print, but it won't pull the paper but I will post only under printers), USB hub and speakers and the Sub.

  Switching on of all this is two small regular bands and a 450va Fellows Battery Back Up Power, that power more fellows to strip something happened and the Stoppers on the work on one side. : (

  Last night it was cold so I went and got a little radiator and not be able to access another electric taken in the room, I plugged it in one of the smaller bands that had the outputs more available. The Unit carried out an hour or two and everything seemed fine.

  When I got up to walk out of the room, I fell a little more of the heater and it farm and therefore part of the office, but I can see a printer is turned on. I just checked the heating on another outlet and it works fine.

  I checked all power strips and smaller Exchange, one of the oldest with a little again, bit a wider power seems to come from all power strips. I know I need to check each of them with a little to make sure they really are producting power, just not a light on for some reason any.

  But the Bureau not power anything. I just read something where it says to unplug the PC and leave that he unplugged for a minute, then after a minute hold button power/start on the PC for 30 seconds, then plug the backend to see if it works. HE HAS NOTHING. I read, where he said it was supposed to take care of any problems with the 'crowbar' in the power circuit, and I don't even know if it is compared to my computer.

  I'll pay more with swapping power supplied and plug things on them, but other suggestions would be much APPRECIATED!

  ONLY connect the computer & monitor in one outlet. Bypass all these power cascading several bands. Then perform the tests appropriate to the device. Here's a general tutorial.

• Dead in the water and stuck to select F1 or F2

  Windows xp home edition with Dell Dimension 4300 desktop.  I'm completely stuck on the select line of F1 or F2.  I have reset the BIOS to the latest version A06 and also replaced battery.  While there, has blown sheep of dust from the fan and checked all the electrical connections and cables.  Re-broken in memory.  Luckily, I backed up all the files on a disk before being completely stuck and I have a laptop that I can use.  But I miss my office.  Should I reinstall Windows XP Home Edition?

  Primary transmission BIOS 0 said peripheral unknown or sometimes offshore; primary transmission 1 is disabled; secondary drive 0 is the CD-ROM drive and secondary drive 1 is the CD-Rom drive.  Boot sequence is also 1.  Floppy drive 2.  IDE CD-ROM device.  I don't know if these settings are correct, but they are the courses in my BIOS.  I tried e Alt, Alt f and b Alt also.  Any suggestions appreciated because I am dead in the water.

  It is always best to do a clean reinstall and not a recovery or repair install, your manual should have instructions and you don't want to do a reinstall on a bad drive, here are some sites that you can check.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites

• Cruzer Contour 8 GB corrupted

  This driver is found to use with an open word file and when my daughter tried to save it on the disk, she noticed that the light on the drive is not on and the drive was inaccessible.  I noticed that the reader expects in an awkward position in the port; That is to say that she was raised vertically upward to perhaps five degrees while still remaining in the port.  Is it possible that the physical connection to the road on the connector was broken due to his being bumped? Or would it just a disc or software failure?  My daughter is in distress because her work for this last semester of college is on this album that she has not saved to his backup drive or his rented work PC.  This stresses out me now and I'm looking for a technical expert to check this and move forward to retrieve the data for it.  Time is of the essence!  I live in Calgary, Alberta Canada and will go to a company of recovery data tomorrow morning.  Does anyone have recommendations or ideas as to what may be the problem?

  Thank you.

  john_dip

  RestoreData.Inc get back to me and said there are serious electrical damage and a usb connector broken on the disc. They cited then me $400 for the economy (6 day return), $600 for priority (4-day service), or a premium of $800 (two day service).  And cost (shipping) for zero data recovery with return of the disc is zero.  After being under duress, that I went for the three-day service and they began immediately.  I received a call on the third business day and that they had recovered all the (data<900mb).  they="" compressed="" the="" data,="" emailed="" me="" some="" files="" to="" check="" out,="" and="" after="" payment="" and="" checking="" some="" files="" for="" corruption="" i="" received="" all="" the="" recovered="" data="" the="" same="" day="" as="" they="" confirmed="" payment. ="" they="" will="" also="" send="" me="" two="" dvds="" of="" data="" and="" the="" original="" usb="" drive. ="" all="" in="" all,="" they="" provided="" good="" service="" and="" all="" the="" promised. ="" i'm="" only="" dissappointed="" in="" the="" minimum="" cost="" of="" $400="" for="" less="" then="" 1gb="" of="" data="" even="" though="" it="" is="" the="" same="" cost="" of="" recovery="" as="" a="" full="" hard="" drive="" failure.="" any="" way="" it="" was="" my="" choice="" to="" go="" for="" the="" priority="" recovery. ="" i've="" since="" purchased="" an="" external="" wd="" hardrive="" for="" my="" daughter="" to="" use,="" and="" insist="" that="" she="" also="" backup="" to="" an="" off="" site="" drive="" as="" well="" as="" another="" usb="" drive. ="" hopefully="" she="" will="" find="" work="" soon="" after="" graduation="" and="" help="" with="" the="">

  john_dip

• Date/time is not set

  My laptop has no battery and when I stop and unplug the unit then it start up, he loses date/time settings, how can I solve this?

  Hi Missey420,

  It is unlikely that the problem has something to do with your 'laptop battery.' However, a battery is involved. When you say that your laptop has no battery am I right to assume that you are referring to the large chunky battery which is used to keep the laptop under tension when you are away electric taken froman? And, for power you the laptop, you use constantly power?

  Depending on how old your laptop is in fact the problem "can be caused by a small battery attached to your laptop computer motherboard." It is circular and environ.5 inches across. It is better known under the name of the CMOS battery which allows to keep the date/time and a few other things on a memory chip on the motherboard. Unfortunately, with laptops being so small compared to desktop computers, replacing the CMOS battery is not an easy task unless you know what you're doing - mainly because you have to remove the bottom cover of the laptop and you should know what you're looking for.

  It can be useful holding a machine repair shop and asking them to check the CMOS battery and, if necessary, change it. In an office the whole procedure takes about 5 minutes and can easily be made by a less technical person. However, laptops are so filled with parts it is easy to disconnect something without knowing that you have done it, which causes more problems.

  If the machine is still under warranty then get the PC manufacturer to watch as I have CMOS batteries last in desktop computers for 4 or 5 years without any problem.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• Licenze microsoft server 2008 R2 standard Ed.

  Ciao

  Scenario: esxi (double take) con 3 Vm WIN SRV 2008 standard R2

  'secondo voi' e corretto licenziarle by singolo o electric taken doppio (= 6 licenze)?

  TX

  SOLO Datacenter e a socket.

  Business standard Ed sono ad istanza.

  SE cerchi sul sito di Microsoft you can find it PURE, a doc file (anche in italiano) con tutte him varies licenze.

  Buon Anno.

• Tecra S11 - broken LCD

  Good afternoon

  I have a toshiba tecra s11-128 with broken LCD screen.
  This model has an LCD with a resolution of 1366 * 768.

  The same series (example: S11 - 11 d) was also equipped with the LCD HD + (1600 * 900)

  I can replace it with HD + LCD screen (resolution of 1600 * 900)?

  Thanks for any response.

  You are right. both models have different LCD displays but the same graphics card. I can't say for sure, but I'm sure you can use the HD screen + with your laptop.

• Tecra 9100: The cover is broken and TFT is dead

  I have a Toshiba Tecra 9100 512 MB of ram CD/DVD + ext DVD-+ RW + ext 160 GB HDD etc, but also epilepsy.
  I came in overweight and broke the lid.
  The case is broken (cover only), and the TFT screen is dead.

  Can you fix this? And if so; How to what to do?

  Please break it down.

  Robert Martin of Steven J. (Steve).

  [email protected]

  Hi Robert,.

  You will need to contact your Service partner allowed the closest to get a breakdown of the cost to repair your laptop.

  It is very likely that you can claim the cost of repair against your house insurance content (I did when my A30 fell on the ground and broke the optical drive).

  Best wishes

• Tecra 8100: Yamaha ds - gx hardware broken?

  Hello
  I have a Tecra 8100 with internal yamaha ds - xg sound card. Last month, the computer hangs when I want to do something with the sound! My first thought was the driver, but even under linux, it no longer works!
  When I disable the driver there is no problem but not its too!
  So I am afrain material is broken, but maybe someone knows if there is still something to see? It's also happened that it worked again, but after a restart not more? Volatile!

  Hello

  Have you tried to update this driver?
  If this is not the case, try to download the latest version of the audio driver on the Toshiba site.
  Visit this link:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Best regards

• HP Envy 15-ae103nc: HP Envy 15 broken coverage taken lan

  Hello

  Lan on my HP coverage is broken. The part of midle bit in the lid which is supposed to take the ethernet cable is gone. EBay is full of lids of replacements, but not this particular one. Is it possible to get it / any place I can order from? I can replace it myself but I can't find the piece in the store of spare parts of HP. Thank you.

  Hi @Okamensky,

  Thank you for your participation in the Forums of HP Support! It is a great location to get resolutions and interact with experts from the community. I understand that you have problems with a broken plug LAN cover. It will be a pleasure to help you.

  Did a remarkable job to do your copious research to find the right piece before asking your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed to see your technical skills, replace it with yourself and certainly value your relationship with HP. We greatly appreciate you for doing business with HP and I take it as a privilege to share this platform with you.

  First of all, as the cover of LAN is not sold in a separate part, you must replace the speaker all background Panel or the base of the unit, as it is integrated. You can visit this link to order the part: http://partsurfer.hp.com so if please select the country and enter the product # unit and search to identify the desired parts. You can also call the part store and give them a product name # and the model of your device to be able to help you order the right part. The phone number is registered on the Web site.

  I really hope that the problem is solved without hassle and the computer works great. I hope this helps. Please let me know how it works.

  Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.

• Table of ACPI broken on Tecra W50-A-104

  Hello support team,

  Looks like the Table of ACPI in the BIOS is broken. When you install the nvidia driver, the system complains about missing features.

  Analysis/execution of the method does not have \_SB_. PCI0. PEGP. VGA_._ROM
  Cannot copy vbios for system memory.

  There are errors in the namespace: [\} Namespace search failed

  IASL reports:

  WARNING: There are 10 external control methods found during disassembly.

  There are 20 definitions more external, that have a "UnknownObj" in it. It is not possible to generate a table of loaded information work.

  There is a serious bug, because the cell phone was buyed for 3D - CAD demonstrations.

  BIOS version: 3.10
  This Version: 1.40

  Installation: CentOS 6.5
  Version of the kernel: 2.6.32 - 431.17.1
  Driver NVIDIA: 331.67

  Please tell me how to upgrade the BIOS and make the work of the graphics card.

  Well cordially

  First of all the latest BIOS is published on the page of the Toshiba UE driver and this time its BIOS v3.10

  The laptop s BIOS is already up-to-date. As you wrote; its v3.10 and, therefore, the update is not possible.

  Back to the question of pilot:
  You try to install a driver from NVIDIA: 331.67. This driver is not released on the Toshiba UE driver page.
  The latest nVidia Driver on the Toshiba UE driver page is 8.1 Win v9.18.13.2660 driver.

  This driver is supported by Toshiba and should be used in the case where win 8.1 installation.

  In the case of another Windows system, copy the driver page published for this particular operating system driver

• Tecra 8100, upgrading the BIOS, whitch that hard drive is taken in charge (40 GB)?

  Hallo,

  I have an old Tecra 8100 one I want to update BIOS. Who knows who is supported (20 GB, 40 GB) hard drive and where can I find the specifications?

  Thanks for your information.

  Georg

  Hello

  As I m wrong not the Tecra 8100 does support an IDE HDD controller.
  In this case, it should be possible to use the 2.5 IDE HDD.

  I can't say much about the formats supported, but the fact is that the size of HDD supported depends on the HARD disk controller. The old controllers IDE up to what the ATA - 5 (also called Ultra ATA/66 or Ultra DMA/66) supported LBA 28 bits, which allows you to use the 120 GB HARD drive max.

  Since ATA - 6 (also called Ultra DMA mode 5 or Ultra-ATA100), you can use IDE hard drives of more than 128GB.

  So if you want to, you can check your IDE HDD controller using a hardware diagnostic tool (IE Everest home edition). Then you might find out what IDE controller is and what drives are supported.

  See you soon

• Tecra M2 - 80GB HD - disk is broken - Windows doesn't start! Help!

  Hello

  I was working with my email using Outlook and just do normal operations, Windows just freeze!

  I tried to restart the PC, but unfortunately it seems that the HD has a serious physical problem.

  I need some data from my rescue disc and I don't know how to do. Do you know if there is a utility that can prepare the HD (those who are not damaged) RAW data and copy it to an external drive?

  Until additional information, I can boot from a floppy disk and I have an external HD which can be connected via USB or Firewire (but I don't know how to get back!).

  Please, any suggestion is very welcome!

  p.s. support people has only offered to change the HD, but they are not able, or by train, to do any activity of data recovery.

  Thanks for your help.

  Giampaolo

  Hello

  First of all, I want to write a small review on your problem. As you know, we have to pay for each service that needs to be done for the user. I am also sure you know there are a lot of stores or services that can save or read all data from broken HARD drive. Unfortunately this service is not for free. If you have a very sensitive and very important data for your business the best solution is to let the professionals to do this.

  If you want to try to do it yourself, it can be very complicated, but you can try. I talked to my friend and he told me that it is possible to do, but you should try to create a bootable CD. With this CD it should be possible to access on an external device like USB connected HARD drive. It gives me a link to an interesting page, and you can try to get some information about this. Check it on http://www.nu2.nu/pebuilder/.

  Good luck!

• Tecra M10 - GPS not taken in charge after the update of the WLAN driver

  Hi all

  I have a Tecra M10 with brod f3507g mobile modem. After Wireless manager driver update (suggested by TEMPRO) gps utility is not working: the error msg is "gps not supported!

  Of course before the driver update gps worked fine.

  Anybody experinced same problem?
  What can I do to fix this?

  Thank you

  Hi ouebgi,

  Have you ever tried to restore the old WLAN driver in Device Manager? There are a restore function for the previous version of the driver and you should try it!