EliteBook 8570w: Elitebook 8570w fingerprint reader works only in Windows 10

Similar Questions

• PC laptop Envy 17: Envy 17 laptop PC fingerprint reader works only after the start

  The fingerprint on my Envy 17 reader reads only a fingerprint the first time that I connect once the system is booted (after shutdown or restart). From time to time, it will read once the system is locked, but that is extremely rare. I put the system in place using my MSN account and also configured SimplePass with default settings. SimplePass version is 8.00.57.

  I looked on several other issues in the forum and did not find something like this. Other issues reported when related to player doesn't work do not, for example. I found a few link in some messages describing such tasks that go back to a previous version of SimplePass.

  I don't know if it is related to my problem or not, but I noticed that the drive light sometimes flashes a sequence once the system is running. It seems that when the light flashes, it will not be read. It stops flashing when I placed my finger on the reader. (I think that the typical sequence is 3 flashes, pause, 1 flash. This cycle repeats.) This isn't always for that well, and I have found no correlation between the flashes and the measures taken after the initial logon.

  I made the fingerprint reader driver, rather than later.

  I uninstalled SimplePass (after update to the last with no luck) and the drive works fine now. I use RoboForm for my password management and it supports using the fingerprint so I'm covered there. I guess it should be renamed "SimplyNoPass."

• Re: Tecra A10 Fingerprint reader works only with IE 8

  I had different user names and passwords stored on several Web sites.
  IE7, I could use the fingerprint reader to enter the user name and passwords for those sites.

  Because Windows update installed IE8, the fingerprint system does not work in internet explore - it works normally for all other programs and logon.

  I figured out it must be something security in IE8, but cannot work out how to re - activate the fingerprint software in IE8.

  Hello

  This question has been posted sever times here in the forum and it related to the question of the compatibility between the old handler access to fingerprint Truesuite, IE8 and Firefox 3
  As far as I know the most recent Truesuite access manager software v3.0 or higher should solve this problem.
  But we have to wait until this update will be published!

  See you soon

• Fingerprint reader works only on my Pavilion dv7 not because I need the program?

  I have a Pavilion dv7 Windows 7 64 bit. I'm trying to get the SimplePass to work. It does at all. Read the error message: "the fingerprint reader is not connected" so I followed the suggestion given in the forum. The new error message says I have need a program for IT is no program in the computer... I have not all system disks... none came with the computer. I'm not computer... help!

  Hello
  Uninstall the software and current driver for the fingerprint reader.
  Restart the system.

  Resources:
  Uninstall software in Windows 7
  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.
  Download and install the latest version of the software from here.

  Note:

  • Restart the system if you are invited to this topic.
  • Now all the most recent browsers should be helped again.

• Pavilion laptop: SD card reader works only with windows 10

  The SD card reader does not work after installing windows 10. I contacted Microsoft... they fixed other issues but said HP drivers needed to be updated to read SD cards.  Help, please. I am a professional photographer and NEED to use SD cards!

  Hello:

  What is the number of full model of your laptop?

  So most of the new laptops pavilion equipped with a Realtek card reader, try the first driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• x 220 card reader works only on Windows 8.1

  Hey,.

  I therefore installed Windows 8 (new install, no upgrades) on the machine and since then the card reader does not work. I downloaded and installed the drivers from the Lenovo Web site and after the failure of Driver Genius, and of ThinkVantage System Update 5.03. Still doesn't work, I install them, but after I reboot it is installed but does not have the card reader (it worked before on Windows 7, the same day, I installed W8). I've updated to 8.1 and the problem persists.

  ATT,
  Lucas

  Yesterday, I did a clean install of Windows 8.1 DVD and did not install anything other than the minimum Lenovo drivers/packages to date (updated system from Lenovo and Lenovo Solution Center). Windows had a notification message that I had to install a driver for the Ricoh media player and its link took me to the download page for Lenovo 2.24.18.01 - what X 230 X 220 and I saw the 2.25.18.01 version too so that, on the contrary (if I was going to risk using the X 230 that I might as well use later). Anyway, I was watching the CPU with a lot of attention and it works fine.

  Note in the case where it is relevant - when I installed the driver, I didn't have an inserted SD card.

• Card USB Reader works only with Windows 7 Final

  My internal card reader is not recognized by Windows 7.  I have uninstalled and installed the drivers of many times without effect.  When I installed the drivers from the website of manufacturers or automatically by Windows, it is not recognized.  After installing it manually through the Device Manager, it is now recognized, but returns the error: this device cannot start. (Code 10).  This device worked perfectly with Vista, Win 7 Beta and Win 7 RC.  The USB port on the card reader works, but not the card reader itself.  Can I use an external card reader and read the card.  The driver is: 6.1.7100.30093 by Realtek.

  Marc and Daniel,
  I solved the problem.  I have checked the connections to the motherboard and swapped USB1 and USB2 connections.  When I reconnected it everything the computer would not start.  I disconnected the connections usb case before and tried and it worked.  It seems that one of the two connections business is bad and the card reader to stop working at the origin.

  Thanks for all your help.
  Ed

• ENVY of HP TouchSmart m6-k015dx: SD card reader works only with windows 10

  After you have installed windows 10 the SD card reader will not work.plz help me I am a student and offbeat leactures etc. in my laptop.

  Hello:

  See if you install the driver of W10 card reader should be...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_155234_1

• Fingerprint reader works NOT in Windows 8

  Hello

  HP probook 4530 s cor i5 (qj763av) need help

  I've updated to win 8 from win 7... everything was fine with win 7, but now with window 8 JJUJ printing does not work and can not find 'TOOL from HP PROTECTION.

  HELp PLZ

  Hello:

  Using fingerprints W8 driver and protect the Manager software security tools support page and the Probook s 4540 driver.

• Alcor micro usb 2.0 card reader works only on windows 7

  Hello!!!

  My alcor micro usb 2.0 card suddenly reader has stopped working on my asus laptop yesterday, when I tried to insert my SD memory card that it just shown for a few seconds, and then he disappeared under the "My computer" window, I checked on 'device manager' and there is a yellow triangle with an exclamation point above and under device status , I get this message: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »
  What I've tried so far:
  Uninstall/reinstall the driver (no need to update when he says that it is the most recent driver)
  Tried the microsoft tool to 'Fix' and it just says: "the problem was found, but changes could have been applied properly.
  Remove the battery from the laptop
  Tried to use my drive to SD memory on another computer and it works perfectly
  Here's something odd: I have win 7 and win 8 dualboot customer overview, I started victory 8 Overview client and inserted the SD memory card and it works beautifully.
  It also seems to work just fine when I boot using the 'safe mode' SD card is fully recognised.
  I would be grateful if you can help me please, I don't know what else to do.
  Features of my laptop:
  ASUS UL80Jt
  Windows 7 64-bit Sp1
  Intel core i3 cpu
  4 GB of ram
  Thanks in advance

  If it is recognized in safe mode you should perform a clean boot to try and isolated the program that is causing the problem.

  http://support.Microsoft.com/kb/929135

• ProBook 6570b: JMicron SD card reader works only under windows 10

  After the upgrade to windows 7 64 - bit for windows 10 64-bit of the card reader is not available any more.

  Is there an updated driver somewhere?

  I found the solution. The card reader did not have a drive letter with the disk management tool I put it to the letter h: in my case, and after that, it was finally visible and accessible in the Explorer. It need driver 8.1 however.

  Thanks for your help.

• Fingerprint reader works NOT in Windows 8 pro

  Dear Experts

  I have HP Pavilion dv6-6c50us Entertainment Notebook. It was working properly before with Windows 7 64-bit but after installtion of Windows 8 pro 64-bit, Device Manager is unable to detect the biometric device. I tried different drivers and software like simplepass v.5 & 6 but in vain.

  Please help me in this regard. I will be grateful.

  Kind regards

  Bilal

  Hello awakeace,

  More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Some updates for W8, most drivers W7 will work in W8.

  Take a look at this document
  Upgrade to Windows 8 document http://goo.gl/CO6uV

  There are several things in this long document, which can help in upgrade problems.

  Please let me know if it helps

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• EliteBook 8440p Fingerprint Reader

  I don't see a Discussion forum for top of Tower, so if I need to post elsewhere, please tell me where to find the good advice.

  I recently installed a new hard drive and reinstalled Win7 Professional. I can't understand how to turn on and reprogram my fingerprint reader. I am sure that the driver is installed. Can someone, please? Thank you

  P.S. This thread was moved from the company - Compaq, Elite, Pro for laptop - PC HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE - HP Forums Moderator

  Hello:

  You can find the computer forum laptop elitebook the link below.  It is located under the heading Moblie.

  /T5/notebook-HP-ProBook-EliteBook/BD-p/BSC-274

  Now to your question... in addition to install the fingerprint reader driver, you must also install the Manager software security tools to protect in order to register your fingerprint.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 4095872 & prodNameId = 4095873 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-115026-1

• EliteBook 8460p: using the fingerprint reader to log on Windows 10.

  I recently picked up this 2nd hand computer laptop for use at home. I was happy to find that it has built in fingerprint reader that will keep my children on my account. This is recognised by Windows 10 on the device as a biometric device manager / Validity Sensor. However, I have no options to activate Windows Hello on my account and found nothing on the Windows support on with Microsoft to respond to my problem. The supplied fingerprint reader will get an updated driver that gets 10 Windows to recognize as supported by Windows Hello? Is it already work? Do I need additional software that the laptop was bought only with its OEM Windows 7 Pro OS installed and nothing else. Any help would be appreciated.

  Concerning

  Rachel

  Install HP customer Security:

  FTP://15.240.238.55/pub/SoftPaq/sp63501-64000/SP63 793. exe