ElitePad900 - do not start windows

Similar Questions

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• My office is behaving strangely, slow, sometimes does not start Windows.

  * Original title: strange

  OK, so I have a desktop with Windows 7 installed above as my users families. My family tends to put viruses or other forms of malware on the desktop as they constantly plugging their friends drive etc. Last week my office just behaved strangely, running slow, sometimes not start Windows and even run checkdisk on each reboot. I have however to discover the reason for all these questions, because it turns out having a Trojan horse installed on the desktop computer that allows a hacker to access my PC remotely. AVG detects whenever I had scanned my office but unfortunately the Trojan horse is just renamed and removed to another place when detected. Last week I did a new install of Windows 7 and everything worked fine until yesterday. I noticed that AVG was not updated yesterday. I first tried to install what AVG but was unable even to reinstall AVG.  I didn't realize that once I have turn off the Windows Firewall I can install and update AVG without a problem. However the firewall Windows has not prevented never AVG update or install in the past. I thought it was a form of malware, the origin of this problem, but after the start of the HBCD and scan with malwarebytes and also to scan using Kaspersky rescue disk. I have not found a malicious software. Even my windows laptop 8 I have no problems updating and installing AVG, while Windows Firewall is enabled. I really believe that it's some form of malware with managed to bypass all virus scans. Please give me some advice and let me know what is the problem and the solution. Thanks in advance

  It has been long since I had no faith on average. :-)

  Use the removal of AVG on this link tool to completely remove AVG, following the installation of Microsoft Security Essentials here ...

  In addition, pull it out of Windows 8 and leave Windows Defender to take over. You will have less problems you get with AVG. There is no need to install MSE in Windows 8, as it's already there...

• Satellite P300-28th does not start - windows does not load

  I bought Toshiba P300 28th last week. I spent Vista business successfully in Windows XP Professional with provided Toshiba DVD. Update Windows with Windows Update. After 3 days, laptop turns off suddenly, and because Windows does not start, it in fact does not start.

  When I press the power button / stop, it turns on, shows "Toshiba Leading Innovation" logo image option and "2", "press 12...", and it hangs and stops.
  I tried pressing F2 and F12, nothing happened.

  I can not access the boot menu.

  I put the Toshiba Recovery CD, the hard drive does not work. Recovery disk does not start, despite earlier I remember put boot CD/DVD at the forefront in the Boot Options to Boot Menu.

  I checked everything, power cable, took the battery in and replace after 3 hours, tried to turn on the portable power, without battery cable. Did not help.

  Don't know what to do?

  Your help is very appreciated.

  Hello Fiona

  If you are unable to enter the BIOS (F2) at startup settings there must be some serious hardware problem.
  I recommend to contact your local dealer where you bought this laptop and ask for help, or you can contact Toshiba service provider directly.

  What you have tried to do is good but if laptop doesn t allow you to enter parameters of the BIOS something wrong here, and you need professional help.

• Satellite L300D-11 a - do not start Windows vista

  Hello

  When I turn on my computer, I get the following error message:

  Error recovery for Windows

  Windows cannot start up. A change of equipment or software that has been recently achieved may be the cause.

  If the windows files are damaged or misconfigured, you can start the repair tool to help you diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Start the (recommended) Startup Repair tool
  Start windows normally.
  After a while windows automatically selects the first option and try to load windows in recovery mode, but then, I get the following error:

  "The installed software could not start. Click ok to shut down the computer.

  When it stops and I start the computer again, I get the same error message when I started with the 2 options of recovery mode or start windows normally.
  When I select 2. option (start windows normally), it loads windows and after some time restarts and then I get the same error with two options.

  I tried to boot from the CD (recovery disk, vista bootable cd) and computer attempts a while but then he gave up and start again starting from the HARD disk. (I changed to boot from the CD first in the BIOS).

  Anyone know how to fix this?

  I have laptop Toshiba model nr: L300D-11

  Hello

  If I understand your message, you tried to boot from recovery and MS Vista CD disc and no recovery disk worked not the Vista CD.

  Is this good?

  Hmm that's very strange... Perhaps you could remove the laptop HARD drive and could put it into a USB external HDD enclosure.
  Then you could format the HARD drive using another computer.
  After that, you could try to reinstall new OS

  Please also enter the BIOS and set it to the default settings the compatible SATA mode value and try to boot from the Vista CD again

  Good luck

• Satellite A100-232 does not start windows, but is stuck

  Hello

  I am having a serious problem with my old laptop (Toshiba Satellite A100).
  When I turn on the pc, it does not start the Windows but is stuck.
  If I press F2 to open the Bios, it seems not work while the works of F12 (select boot device), but it is impossible to start anything.

  I tried the following:

  1 removed, cleaned and replaced the RAM
  2. HARD drive removed and reconnected.
  3. check the HARD drive if it is damaged, but it is not.
  4A tried to boot from the Windows XP cd and install it but it crashes
  5A tried to boot from the cd with Linux, but it does not work.
  6. has created a Windows 98 flash drive to start, but it does not work.
  7 tried to clear CMOS by removing the battery, but I couldn't because he is stuck on MB.

  I visited a technisian but he couldn't fix it.
  He told me that the BIOS is corrupted or crashed. Maybe I should replace somehow.

  Is this possible?
  How?

  Thank you

  It is for the Satellite A105 (PSAA2U) Bios Update, you can test the file at your own risk.

  A text readme file is located in the folder, follow the instructions.
  Download the Bios file from the link and copy it to a USB key, go into you Bios and this flash file.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2188938&PF=true

• HP G71 340 Notebook computer: computer HP G71 Notebook not start Windows 7 installation disc application

  Suddenly I became / / / as this in the search window, tried to run Norton, it seems stuck so I turned it off and then tried to restart, it sound strange signal, beep... beep, that I never heard before after repeated tests went up in the verification of memory message, and it is went well and seemed very well, but still cannot start it somehow a message

  that the battery is low must be changed, instruction followed by HP from another computer to drain and reconnect, but contine to pass the message that Windows could not starte, assistance program have been changed, you have to insert the Windows Setup disc, which I apparently do not have with me at present, probably misplaced, that the computer was purchased 10 + a few years ago.

  What I do, and how do I retrieve my documents, even if it is fixed. Appreciate any advice! Not very computer savy at 79.

  The question has been cleared up by itself, as the liquid I used to clean the filling of kay should have passed and created the problem of dysfunction. I brought to Staples and paid from the outset for diagnostic work, fortunately they coulnd't you not in my computer because they have misplaced my password. I remember the next morning incident, and of course the computer went back to normal when he trided. To speak with the Manager, I received my full refund. It works very well. So be aware of the effect of liquid in your computer! Thanks for trying to help though and will keep the information in case I need it in the future how to get the disc to start my computer.

• When I install memory in my hp pavilion dm4-1160us why can't not start Windows?

  Current running Windows 7 Home Premium, 64 bit, Version 6.1.7601 Service Pack 1 Build 7601

  HP Pavilion dm4-1160us XH124UA PN #ABA

  Processor Intel (r) Core i5 CPU M 450 @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors

  BIOS Version/Date Hewlett-Packard F.27, 21/12/2011

  Installed 2 4 GB DDR3 10600, 1333 MHz SODIMM

  Windows does not start. I tried using 1 stick at a time to see if it was bad, still does not start. I reinstalled the 2 sticks of 2 GB and it started off very well.

  Some DDR3-1333 is low voltage 1.35 volts and you need 1.5 volt memory. Also look at configuring physical chips existing fo... black blocks on one side or both sides? 2 rows of blocks or one? Try to match as closely as possible.

• RUN the object that will not start Windows on-screen keyboard

  I use Lookout 6.5 on Windows 7 Professional. I use a button to fire a sequencer whose output starts a RUN object with a command line of the 'c:\Windows\system32\osk.exe '. Executes the RUN object, but I get a window that says "could not start on-screen keyboard. The window has only 'OK' as an option - click on OK and the window disappears. I tried the same object RUN notepad.exe with wordpad.exe, and they work very well.

  Anyone see what I'm missing?

  Thanks for your reply, Ryan.

  I have now found a solution – but first a few puzzles. I can use the Lookout RUN object successfully to start other executable files in the Windows\system32 folder - but not the osk. I can start the osk in other ways (shortcut, double-clicking the .exe from a .bat file).

  I copied the osk.exe to another folder on the hard drive and can now begin with the Lookout RUN object. I don't know why this works differently - but it does. Thank you.

• Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

  After the updates of this week, the system will not load anything.

  Hi Juliet,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that after Windows Update, you can not load Windows.

  To better understand the question, please answer the following questions:

  1. What is the version of the Windows operating system that is installed on your computer?

  Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  2. what happens when you try to load the system? You receive an error message?

  3. what application or anti-virus security suite is installed on your computer?

  4. you remember after installation of update, you are facing this problem?

  Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

  If you are using Windows 7 and Windows Vista, follow the mentioned methods:

  Method 1:

   

  If the computer does not start in safe mode, perform the last known good Configuration.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Note: Link above also applies to Windows Vista.

  Question remains always use same method 2.

   

  Method 2:

   

  Try to perform the Startup Repair and check.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Windows XP, follow the mentioned methods:

  Method 1:

  Perform the last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2:

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• Computer does not start Windows 7. .

  Did you update to service pak 1 to restart received a message that your computer could not start, Startup Repair checks your computer if problems are found in the Startup Repair tool will fix their. Startup Repair next message was not able to repair your computer and is blocking drop. When I restart I get the same thing every time. Ready to pull my hair roughly what I have. Any help would be great.

  Hello

  Problems to install a service pack for Windows 7
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/installwindows7sp1

  Information about Service Pack 1 for Windows 7 and Windows Server 2008 R2
  (How to get and support options)
  http://support.Microsoft.com/kb/976932

  Service Pack Center
  http://Windows.Microsoft.com/windows7sp1

  If necessary:

  How to uninstall Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1

  =====================================================================

  Use the direct link to download SP1.

  Another solution is to download the SP1 and burn the ISO to a disk and then install it.
  In fact, this method is known to solve some problems, such as the USB bug, that can
  assign systems when applied through Windows Update.

  Steps to take before installing Windows 7 Service Pack 1 from Microsoft
  Download Center
  http://support.Microsoft.com/kb/2505743

  Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=C3202CE6-4056-4059-8A1B-3A9B77CDFDDA

  Documentation for Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=61924cea-83fe-46E9-96d8-027ae59ddc11&displaylang=en

  Problems to install a service pack for Windows 7
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)http://windows.microsoft.com/installwindows7sp1

  Information about Service Pack 1 for Windows 7 and Windows Server 2008 R2
  (How to get and support options)
  http://support.Microsoft.com/kb/976932

  Service Pack Center
  http://Windows.Microsoft.com/windows7sp1

  --------------------------------------------------------------------------------------------------------------------

  Visit this link for more information of MVP Andre Da Costa.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Service-Pack-1-for-Windows-7/394c4fa3-2d62-E011-8dfc-68b599b31bf5

  I hope this helps.

• Code 10 for TI OHCI Compliant IEEE 1394 Host Controller-reinstallation does not start Windows XP 2002 Service Pack 3

  Have reinstalled several times-software not Windows approved driver IT will not start

  How does this relate to the features of Windows Update?

• 5700 sucks not start windows cannot use recovery CD

  I have an Aspire 5742 running Windows 7 Home Prem

  When I try to start windows I get a message from windows Startup Manager

  File: \windows\system32\config\system

  Status: 0xc000000d

  Info: Windows does not load because the system registry file is missinig, or corrupt.

  All the information I found about it says to boot from the cd backup and restore. But does not start the rescue cd. It is to the top of the same screen as above. I used a Live CD from another operating system to test the dvd player and it works and LiveCD boots (I have not install anything). How can I get the live cd boot and restoring windows?

  Thank you Tim

  Add you to the new device for your PC?

  Otherwise, this can your RAM error, try plugging / on your windows without end to research RAM.because (more than 15 minutes) show your PC with hardware or incompatible error

• MY TOP of DELL Dimension 1100/B110 DESKTOP will not start windows black screen of death.

  I had my computer when there was a power failure in a storm, it was on a surge protector but the next day I turned on the computer, it was clicking on and then he gave me a black screen with the time system and configuration system date drive and other different things, but no screen with safe MODE or something like that. and I have no enternet, here where I live. Help me please.

  MY DELL DESK TOP Dimension 1100/B110 STARTS at THE BEGINNING, GOES THROUGH THE MAIL. SO NOT ME NOT LEFT IN THE SAFE MODE SCREEN, IF I PRESS F8, IT GOES TO ANOTHER SCREEN WHICH ME SAYS THAT MY HARD DRIVE CANNOT BE FOUND. IF YOU GO TO ANYTHING ON THIS PAGE IT TELLS YOU THE "PRIMARY MASTER" PLAYER IS... HARD DRIVE. AND THE MAIN SLAVE DRIVE IS... OFFAND STUFF LIKE THAT BUT NO SAFE MODE OR ANYTHING. MY SCREEN IS A BLACK SCREEN. AND WHEN I START THE COMPUTER THERE AS A TRIGGER FOR A BIT BEFORE I GET THE SCREEN I GET. WHAT SHOULD I DO?

  Hello

  · You have the Windows XP Setup disk?

  You can follow the steps in the below links which will help you solve the problem.

  Link: "operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer: http://support.microsoft.com/kb/321626

  Computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

  If you do not have the disk to the operating system, then you may need to contact the manufacturer of the computer. Link: http://support.dell.com/support/index.aspx?c=us&l=en&s=gen& ~ ck = mn

• Computer not start windows

  Hello guys hope that someone can help me.  I have a windows 7 HP PC, I want to fix whenever I turn it on the computer just rest on the hp screen I can use options it's for me except for access to the bios, which is the biggest part of the problem of loading. I opened and found my cmos battery is missing I don't know if this has something to do I also used one of the options that has been diagnosed and says that the HARD drive IS NOT DETECTED BUT I DON'T KNOW WHY EVERYTHING SEEMS to BE OKAY. ALSO THE COMPUYTER. HAD MUCH O VIRUS BEFORE IT I SCREWED UP.

  Hello

  Buy a CMOS battery. they are only about $5.

  @@@@@@@@@@@@@@@@@@@@@

  Test your hard drive:

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the hard drive passes the tests:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.