error 0xc00000e9

Similar Questions

• Satellite L650 starts with error 0xc00000e9

  Spending hours finding aid, but none seem to solve my problem.

  When I turn on the laptop it lights up as normal but does not load the logo toshiba or anything after that, if I leave it will have windows loads, then implement the code error 0xc00000e9, I tried to use the f8 key to restore the few that it does not work, I tried to take the battery method, but that doesn't work either.

  Laptop is very hot below don't know if this is useful, once on the screen error code if I hit the continue wil just repeat the process of return error code onscreen.

  Any thoughts what I please

  Just to add it to load the toshiba logo, then goes to windows load the files stay on it for a few minutes then go to the oxc0000e9 error

• Error 0xc00000e9 on Windows Server 2008 std

  I have a Dell Poweredge R410 which works well for over 3 years now and has Windows Server 2008 std 64 bit.

  At Christmas, let him download and install updates.

  But going back, I found it displayed error '0xc00000e9' and ' boot manager is missing or damaged.

  I tried to repair by original DVD disc but I can't find the installation of windows 'fix' and on that list, empty it.

  If I try to boot with the disc of Windows 7 Pro, I can see the existing installation of windows.

  How can I fix this server?

  I can not format because of the payload inside.

  Any help?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I have error 0xc00000e9; says that my registry is "corrupt or missing".

  I have error 0xc00000e9 occurring, telling me that my registry is considered to be "corrupt or missing".  Neosmart Vista disk recovery, while it has been useful, can't solve the problem of registry. Back story: I believe when the computer flopped on its side (falling to about 6 inches) for the carpet, he dislodges the HD a little. (the computer was in "sleep" mode).  I've repositioned the HD, ran to the computer and that's where the error occurred initially. As I said, I ran the Neosmart disk. While he does some repairs (partition and MBR), I still get the same error code. I can back up the drive by enslavement, but I can not boot from this drive.

  Hello

  Thank you for writing to Microsoft Communities.

  Step 1: First of all, you can try to disconnect all external devices (printers, scanner, USB drives, etc.) except the keyboard and mouse and then try to start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.

  Step 2: You can try a Startup Repair boot from the full version of Vista disk and check if you can solve the problem.

  1. Insert the installation disc.

  2. After inserting the disk to restart the computer. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  Follow these recommended steps and after if you still experience the problem.

  Follow these recommended steps and after if you still experience the problem.

  3. choose your language settings, and then click Next.

  4. click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  For more information, please visit the following links:

  Startup Repair:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  If the problem persists, then you can try a system restore to start from the disc of Vista:

  1. in the System Recovery Options box, choose the drive of your Windows installation dialog box, and then click on Next.

  2. in the System Recovery Options dialog box, click on the restoration of the system.

  3 follow the instructions in the wizard to restore system as usual and choose the restore point before this problem.

  4. click on Finish to restore the system

• brand new, no operating system installed computer and error 0xc00000e9 occurs

  I just built a new computer today and everything seemed to go ok. Everything was hooked and when I go to install Windows 7, I get the "i/o error 0xc00000e9 unexpected." I tried to do so many different things, but it never works. I searched online for about 4 hours, now in train to find a solution, but every time I find one and try it, it breaks down and I'm back in step 1. any help would be appreciated!

  Hello

  • What is the brand and model of the computer?

  This problem occurs because you cannot start the computer with a hard drive. The error message refers to a material error in the BIOS of your computer.

   
  Method: To resolve this issue, update the BIOS to the latest version settings.
   
  You must contact the manufacturer of your computer for more information about how to reset the BIOS settings
  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• My Satellite Pro L450D starts with error 0xc00000e9

  Hello

  whenever I tried to start my Satellite PRO L450d-12 x it shows me,
  STATUS: 0XC00000E9
  Info: An unexpected i/o error has occurred.

  Have idea how to fix?
  I'd much appreciate help.

  Hello

  Can you please tell us what exactly happens when you start your laptop?

  There is obviously a problem in common between the hardware connected to the motherboard. It may be the HARD drive. Of course, it is not easy to say what exactly is the problem.

  If there is no problem for you to install OS again once I recommend you set the BIOS to default settings and install original OS that you got with your laptop. It's simple and the best method to check the operation of the equipment with the factory settings.

  If this will not help, I assume that there is a serious hardware problem.

• Unable to start error: 0xc00000e9

  There was no change to the laptop, this error message, it is impossible for me to recover and treat my work in class, not to mention the laptop does not start. help help!

  original title: windows does not start, the error message saying hardware or software changed caused fo the Computer unable to start smoking... status: 0xc00000e9. help that I'm a student trying to finish my homework before class on Tuesday. HELP__

  Hi helpthislady,

  Sometimes, this error indicates that the hard drive may be failing.  Perform the following steps to check the integrity of your hard drive. If you are unable to access the Advanced Boot Option menu by using the F8 key, you will need to get a CD of Windows Vista.

  1. reboot your computer by tapping the F8 key until you reach the Advanced Startup Options menu.

  2. Select Safe Mode with command prompt.

  3. type chkdsk/r (there is a space between the k and /)

  Once you are able to start Windows, back up all your important data.  Let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation disk - error 0xc00000e9 Startup Repair recovery image

  My problem is simple. I wanted to restore to factory settings so I followed a 'how to' guide.
  I reboot and was pressed F8 to open the menu where the option "fix my pc. I select, a bar starts to fill and then it should open another menu with different catering options. But what really happens is that I get this error:

  "Windows has encountered a problem communicating with a device connected to your computer.

  This error can be caused by unplugging a removable storage device, such as a USB external drive when the appliance is used, or by faulty hardware such as a hard drive or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  Status: Oxc00000e9

  "Info: an unexpected i/o error has occurred."

  I can´t understand the error so I'll contact the manufacturer. Thx for the help.

  If you are not able to run HARD drive recovery, the problem might be related to HARD disk problems.
  If would like to know if its possible to retrieve the laptop using the recovery disk.
  This disk should be created using recovery Toshiba disc creator software pre-installed on the notebook normally this should be done on the first day of purchase

  However, if the laptop's warranty covered, get in touch with service to solve hardware problems.

• error 0xc00000e9 at the start of the cd

  I recently had a virus on my computer that has removed all .exe files.  I'm trying to restore my system and when I put the windows cd to boot from - I get an error message "Oxc00000e9.  I searched everywhere on this error, it is said to start from the cd - but it is trying to boot from the cd I get this message.  Does anyone have a suggestion?

  Hello

  This question seems due to the disc corrupted as the CD/DVD drive is not able to read the disc in Windows Vista.

  I suggest you try to use another Windows Vista bootable disk and then try to repair the operating system.

• On startup, I get a "error 0xc00000e9 saying that windows/system32/config/system is missing or damaged, but sometimes after several tests, windows vista starts finally."

  My pc has even sent to ASUS and they said they had set, but within months, he started the error again. I even had a computer programmer look at the and reinstalling everything, but still the error comes and lately, it happens every time you start :(

  Hello

  I suggest you to follow these steps and check if that helps.
  Method 1:
  Try to start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• System registry fileis missing or damaged - error 0xc00000e9

  I have a Compaq Presario computer that runs Windows Vista Basic 32 bit. Two days ago I got the message, unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your installation disc and restart your computer. 2. choose your language settings, and then click Next. 3. click on repair your computer.

  File: \windows\system32\config\system status: 0xc00000e9 Info: Windows failed to load because the system registry file is missing or corrupt.

  On this screen, press 'ENTER' to continue, which allows me to hit the press "F8" for advanced options. I press any button, it takes back me to the original screen. It does not give me the option "repair your computer", either.

  I have the built-in Windows Vista Service Pack 1 disc and I load it, and then restart the computer, but the same screen appears. Help someone?

  Original title: fileis registry System missing or damaged

  Mike, I don't see any of the screens have shown in the tutorial... just a black screen that continues to take back me to this God awful message, Windows could start... is the disk Windows SP1 integrated the correct disk, I need to repair or reinstall Windows?

  If this is a good DVD of Vista, not a HP, Dell, recovery disk etc. you should be able to repair or to reinstall Vista with it.

  A factory recovery disc does not normally gives you the choice of remedy; It is a straight line to reinstall.

  If you are starting to leave her properly and still get the message, you have a hardware problem.

  Here's how Boot from the DVD drive:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Make sure that everything is done correctly first.

  Here is the full and correct way to use the ERD to Startuip:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here's how to do the clean install:

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot complete the reinstallation of Vista on Compaq laptop using the Compaq recovery disks. Tried to restore disk oem and new close to identical road. Errors: 0xc00000e9 and 0xc0000189 respectively

  With no unusual occurrence that accompanies it, our laptop was able to start and would not initialize anything beyond a screen B & W style BACK and gave the first error (0xc0000e9) on this screen. After several unsuccessful reboots insert us the Compaq recovery disks and crossed the recovery (only full optional with such discs.) At the end of the transfer of recovery (from DVD on computer), the computer tried to restart and reported the same error message. We have seen anything past the transfer of files and B & W on the oem disk. I think the oem HD is bad. Web-surfing suggested the error was associated with a hardware failure and the DVD drive seems to work very well I bought a new HD almost identical to replace the oem version with. Both are Seagate Momentus 160 GB at 5400 RPM drives.

  I re-inserted the recovery with the new installed hard drive disks and it loaded and seemed basically completely install Windows (computer is restored running several times and showed the Windows desktop with sequential programs etc. facilities.)

  To restart the final success, I received an error message in the sense of "windows could not install: Please restart the installation process" and the 0xc000189 error code. I tried again and the result was identical, including the error message. In the process the emblazoned shortcut labeled sunflower administrator with "locked" below briefly appears before the above error appears above him. Navigation on the Web seems to suggest I've hit some kind of security problem that appears when an oem auto-installer is used. He was never a password of any kind on the laptop of our family, if there is one, it should be of Compaq.

  It's an authentic (not stolen etc) oem new install of Windows (the laptop is only 18 months old) and I CD code on the computer but not the case in the installation me I asked for it. I don't know what you looking for installation.

  I'm very confused and any help would be appreciated. Compaq is saying it's a matter of Windows of course.

  Thank you

  http://www.Compaq.com/CPQ-country/cpq_support.html

  Problem with the recovery process, contact the manufacturer of the computer.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• Run32dll.exe winbrand.dll and other errors

  Hello

  I tried to change the audio devices on my PC (windows 7 64-bit) about 20 minutes ago and was given and the error window with the title, "No supported 16-bit Application" the text in the window said, "the program or function '------?" \C:\Windows\system32\rundll32.exe"cannot start or run due to incompatibility with 64-bit Windows versions. Contact the reseller of software to ask if there is a compatible version of Windows 64-bit. »

  After closing this window, it gave me another error with the title window, "C:\Windows\system32\rundll32.exe" the text of the window has to say, "the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I then thought about opening guest to use the sfc/scannow command... Normally to open the command prompt I press the Start button and type in cmd and select it. I did this, but the search function did not work. Manually, I went to the location of the command prompt and open to return with another window of error with the title, "cmd.exe - bad image" and the text in the window saying: "C:\Windows\system32\WINBRAND.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider. »

  If naturally my next thoughts had to do a system restore, I opened it, whereas starting up and faced another problem in the system restore window saying, 'system restore doesn't seem to work correctly on this system. An element of Volume Shadow Copy Service has encountered an unexpected error. Check the log of events applications for more information. (0 x 80042302)"

  I went to open the event viewer, but that has failed to open.

  I did everything I can think of to solve these problems, but so far, nothing has worked. The only other thing I can think to do, it's a complete reinstallation of windows I want to avoid doing so if possible.

  Thanks for the tips.

  I have however a full clean have reinstall of windows 7 as when I tried to start in safe mode, I was faced with a black screen with just the current mouse cursor. It's the same thing on normal startup.

  However I had problems when reinstalling windows. I got error 0xc00000e9 when you try to install from the disc. I looked into things and eventually remove all disks hard bar that now, I managed to install windows on.

  I think that the problem was a virus and I advise to all others who have faced the same problems as me to do a full clean reinstall of windows. You may lose a lot of documents, but your computer will be is more infected with the virus that may be present.

  Thank you for the help

• Satellite C660D-155 - Windows 7 does not open

  I can't the laptop to open, as I get an error message that a USB or storage device is removed while the laptop was still running. It seems that an Internet Dongle is removed before closing. I get a message error 0xc00000e9 IO. The system suggests to repair the system, or start normally, but each of them I want back me to this same error report.

  I contacted the Technical Support & they gave me good info, but suggest that I make a back-up or save first! I don't know how I can do this, because I can't open the system to create a backup copy.
  I can't find my original recovery disk, but I have a few backups that I created a few months ago.
  Can anyone suggest how to move on, because I don't want to lose all the files on my system.

  Thanks in advance

  Bren

  When you start a laptop try using the F8 key and enter the advanced startup options.
  It work?
  Figure option fix my computer in the list? By using this option, it would be possible to enter in the system recovery options.

  Try to start in safe mode Notepad.
  If nothing works?

• main hard drive test giving fault

  I was installing antivirus software on my hp pavilion 1303au g4. After some time it freezes so manually restarted. Restart windows give me code error 0xc00000e9. I selected the system diagnostics in the bios and the selected hard drive test he gave me a fault 4% fine in full test and quick, but he went from smart hard drive test. Vulnerabilities error codes 0305 and 0303. Please help me I am a student and I have to finish my work. Help, please...

  Hi kit777,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that when you tried to install an Anti virus software that you have received this error "0xc00000e9. It is usually indicatvie of a hard disk problem. The fact that the test drive is not also a 4%, confirms that the hard drive has problems.

  I strongly recommend to back up your data to avoid loss.

  You can try these step to help.

  Restart your laptop and press F8 shorten once per second to enter advanced startup options

  Select safe mode with command prompt

  Right-click on command prompt and run as administrator

  Type chkdsk /r and press enter

  It will attempt to repair the bad sectors.

  If he repair the hard drive, it is usually temporary and is likely to require replacement in the near future.  I suggest you only look to replace your hard drive.

  You can contact HP support for assistance to this process or other options that can be put at your disposal.

  You might also have a replace computer store, or you can do it yourself.

  Contact HP technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get assistance from your Technical Support Sitemap HPregion number.