Error in device IO in Windows 7

Similar Questions

• I get an error message when I start Windows 95 is that Device.IOS is missing

  I am trying to reload windows 95 using a startup floppy disk, everything is fine until I try to open windows 95 after installing

  Error message: error protection device IOS windows initialization.
  After you apply the help files I discovered that the file Device = Dbibuff.SYS dosent apeare in the Bootlog TXT
  How can I insert this line.

  Hello

  Support for Windows 95 ended:

  http://support.Microsoft.com/lifecycle/?P1=7864

  However, you can consult the following link:

  http://support.Microsoft.com/kb/136337

  I hope this helps!

• Cannot access the he DVD drive in Windows Vista. Error: This device cannot start. (Code 10)

  All of a sudden my DVD drive has stopped working. Windows Vista SP2 doesn't see it, but I can see it in the BIOS.
  Error: This device cannot start. (Code 10)
  The driver has the exclamation point. I uninstalled the driver and restarted the PC, but the system does not re - install.
  The exclamation point is up there.

  Help, please

  Thank you

  Hello

  This article can help...

  http://support.Microsoft.com/kb/314060

  Tricky

• Windows crashes every 10 minutes for abt 30 sec / 2 min with «the pilot detected an error on \Device\Ide\IdePort0 controller»

  History/context: This problem started happening on my Dell Vostro 220, while he was new (May 09), on Windows Vista that it came preloaded with. I figured a SATA controller and a defective Dell replaced both my HD (& SATA cables) and Mobo. But ongoing problem - then Dell suggested to set access drive in AHCI mode in the BIOS. I did and in HD and installed also XP. Problem persisted. XP errors in the journal system came as '\Device\Ide' and '\Device\Hd0' sometimes sometimes. Reference Dell insists that it is a driver problem Windows. Since then, I still formatted hav clean and installed with Windows 7, what I use now. But the problem persisted.

  System:
  Dell Vostro 220 with Intel Core 2 Duo E7400 @ 2.8 Ghz, 4 GB of RAM (3 GB usable), running Windows 7 Professional 32 bit. 1 x DVD Writer TSST Corp TS - H653F ATA hard drive WDC WD2500AAJS - 75M0A0 ATA

  Symptoms:
  On bad days, it happens every 5-10 minutes; other times 30 min. Locks up system / freezes during 30 sec to 2 min during which I am able to move the mouse cursor, but do not click on anything anyone or do anything else. When Frost "thaws" if I check the Logs of error in the system log I still see the "EventID:11" error "Source: atapi ' 'driver has detected an error on \Device\Ide\IdePort0 controller. Sometimes (not always) I also see a spike in the graph of CPU use if I check right after the "thaw", but I was not able to determine what process as I am looking after the fact. Normally, there are 4 SATA Ports on the motherboard. 0.1 were used for HD, DVD. If I unhook the DVD drive altogether and connect the HD SATA cable to the port marked 2, I get the same errors, but "\Device\Ide\IdePort0" becomes "\Device\Ide\IDePort1".

  Other note (s): During the installation of the OS, Dell has a "Intel Matrix Storage" listed as critical on their site, but when I try to install it, it says "no compatible hardware not detected" and install exists.

  Also, interestingly, if I take the HD (in blue) to the total of SATA cable and try to connect SATA cable from the DVD recorder to the orange (originally) between individual ports Mobo and HD, I get a mobo error - flashing 3 light and "beep" as soon as I turn on. It disappears if I go back to blue SATA cable from the Hd for HD

  Hello

  As you have informed us that you are always faced with the question after installing Windows XP and Windows 7.

  I suspect that the problem is somewhere in the material or the SATA ports on the motherboard. I suggest you to contact the manufacturer of your computer for help, because they will be in a better position to help you.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows backup default - Eventvwr shows error on \Device\Ide\IdePort0 controller

  Hello

  I'm at my wits end. I got the error 0 x 81000037 when you run backups windows recently. I am backing up to an external USB drive.

  I went through the entire analysis point fix, I run scans antivirus complete and deleted all quarantines and I have now deleted all audio-visual products. I tried to back up selected folders, clean boots and I'm still not able to run a backup. However, I'm now not only this error code, but others.

  Looking at the event viewer, it seems that each backup error is preceded by 11 on atapi event: «the pilot detected an error on \Device\Ide\IdePort0 controller»

  I don't know what it is, but I wonder if this is what is at the origin of the problems, and if so, is this a problem with the external USB HARD drive or internal one.

  Can anyone help? I'm desperate to save my files.

  Hello

  You might face this question when the competent services for backup are not running, you can also face this question when the chipset drivers are corrupt. Make sure you don't have any other external device connected to your computer outside of the mouse and keyboard. I suggest you to make sure that the following services are running and set to automatic.

  Shadow copy volume

  • Windows backup service
  • Engine block of backup Service level
  • Windows event log
  • Task Scheduler
  • Click Start, click in the start, Search , type services.mscand then press enter and then check the benefits described above, one by one.
  • You can follow the steps in the link below and check if it helps you.
  • Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  • http://support.Microsoft.com/kb/973455

  You can also consult the steps proposed by Stephanie Podder dated 8 June 2013 , the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/event-ID-11-source-ATAPI-the-driver-detected-a/1c45a710-596f-468C-970D-74858d0a96b6

  Let us know if you need additional help from us.

• Chess Titans did not start is no 3d devices & error 1920. The service "Windows Font Cache" (FontCache) has no start.verify you have sufficient privileges

  Original title: titans of the game of chess,.

  Chess Titans did not start cannot find 3d... devices also office 2013 do not install (error 1920. The service "Windows Font Cache" (FontCache) has no start.verify you have sufficient privileges.
  I have the following in the Event Viewer error log

  Log name: Application

  Source: Application error

  Date: 14/07/2013-10:15:34

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: darkpheonix-PC

  Description:

  Name of the failing application: chess.exe, version: 6.1.7600.16385, time stamp: 0x4a5bca09

  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000

  Exception code: 0xc0000005

  Offset: 0x000007fef9ca0004

  ID of the process failed: 0x1c24

  Start time of application vulnerabilities: 0x01ce804cf85d03a4

  The failing application path: C:\Program Files\Microsoft Games\chess\chess.exe

  Path of the failing module: unknown

  Report ID: 37e9d6e6-ec40-11e2-8c42-f0def1a3fe7e

  The event XML:

   

     

      1000

      2

      100

      0 x 80000000000000

     

      8266

      Application

      darkpheonix-PC

     

   

   

      Chess.exe

      6.1.7600.16385

      4a5bca09

      unknown

      0.0.0.0

      00000000

      c0000005

      000007fef9ca0004

      1 c 24

      01ce804cf85d03a4

      C:\Program Files\Microsoft Games\chess\chess.exe

      unknown

      37e9d6e6-ec40-11E2-8c42-f0def1a3fe7e

   

  Hi Sreevasthava

  I suggest you perform the upgrade in-Place on Windows 7, this would help you to solve the problem without losing any data or application.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2.

  http://support.Microsoft.com/kb/2255099

  Note: before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps.

• Wired controller Xbox 360 connects to Windows 7, error: USB device not recognized

  Original title:-wired controller Xbox 360 connects to Windows 7

  Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?

  Hello

  1. did you of recent changes to the system before the show?

  2. do you have the receiver for the device to the XBOX?

  Method 1: Troubleshoot your XBOX controller.

  Follow the steps in troubleshooting from the link below and check if it helps.

  http://support.Microsoft.com/kb/908888

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/accessories/controllers-remotes

  Method 2:

  (a) click Start.

  (b) access Control Panel, click on System.

  (c) click on hardware, click Device Manager.

  (d) open Device Manager and expand the devices with error code 43.

  (e) right click on the device and Uninstall the device.

  (f) restart the computer.

  Check to see if that fixes the problem.

  If the problem persists, I suggest that you follow the XBOX support link below for assistance.

  http://support.Xbox.com/en-us/

  In addition, check out the link below and check if it helps.

  http://support.Xbox.com/en-us/Xbox-360/troubleshoot/hardware/error-codes

  It will be useful.

• Error "the device is not ready" to the Windows command prompt when you access a key USB from VMware

  The host and guest are running Win 7.  Version of VMware is 11.1.3.

  The guest computer, Windows Explorer displays the USB and I can open its files, etc.

  However, when I use the Windows command prompt to access the USB of the client, I get error "the device is not ready".

  In order to get the guest system memory image, the application must be run from the USB as an administrator.

  Help, please!  Thank you!!

  I already found the answer.  Win 7 had not installed USB 3.0 controllers.  I downloaded several executables from Intel and Lenovo sites, but they does not work because the system only has not meet the specifications, etc..  Then I discovered that a USB 2.0 stick had any problems.  So, I use 2.0 for this virtual machine.  Thank you!

• Windows XP SP3 USB errors / unknown devices with Plug and Play

  I have problems with USB flash drives and other plug-and-play devices detected by windows. After taking all possible measures to correct this problem (e.g. windows update, chip / update of the bios, update driver, driver and media ultilites reinstall, uninstall and allow windows update after restarting, removal of hidden devices and even remote tech support from Dell) whenever I connect a flash drive or use all plug-and-play devices it is detected as an unknown device and I can not put updated pilot any port I use. Hardware problems were excluded dute to recognition of the device and USB keyboard and USB mouse are functioning properly. Also these same plug-and-play devices worked well on other items of work. After Googling my eyeballs, I gave up and need help please. The only thing I can do now is to reinstall the operating system that really, really, I don't want to do.

  UPDATE *.

  Dell has replaced the motherboard and the problem was solved. Thanks to all here who offered advice and patience.

• We get an error "this device cannot start" Code 10 on Windows 7.

  Original title: USB not recognized verified work storage device

  I have a 8 GB USB Flash drive that has, until recently, worked perfectly on several OSes including Windows 7 and 8. Recently, the player does not seem to want to work on one of my installations of Windows 7 on a PC (HP EliteBook 8470p).

  I tried to reinstall the drivers for it on my machine specific windows 7 that does not work on. Device Manager gives me "this device cannot start. (Code 10) "even after reinstalling the drivers and reboot several times. I use also some virtual machines in Windows 7 and 8 on the same PC, and when connecting virtually the USB key to the virtual machine to Windows 7, I can't detect it. When you connect the device to the virtual machine from Windows 8, I can access the files and even format, so the USB ports on my computer are all functional.

  To summarize, the device works in Windows 7 and 8 separate facilities of this computer, but does not work on 7 on my TI, if the main or virtualized operating system. The VM of Windows 8 on this computer can recognize the device.

  Thanks for the answer, except that I discovered the problem. I checked upward in the disk management window, and I saw that the reader, for some reason, was not assigned a letter. After you manually assign the drive letter, all data on the disc is now available. Thanks anyway.

• Get: error in device: device not authentic when you launch the app VirtualBench

  When I start the application virtual bench (10 x 64 Windows) I say device error dialog: "device error: device is not authentic" and am no longer able to connect to the device. At one point, I was able to connect to the device via the USB port and also via wifi. I have rebooted the machine, pedaled power, uninstalled the drivers, reinstalled the software virtual bench with no luck. Any advice?

  After an attempt:

  -Reset the device via the button on the back of the device of virtual bench

  -remove the installed drivers

  -resettlement of bench virtual application

  -another machine

  -connection via the access point

  -USB connection

  -try a different USB port

  Still not had luck. Until finally, I decided to unplug the power on the virtual bench cable and plug it back. Looks like it's a pure reset of some sort. Now, I can connect successfully to the device

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive error messages when trying to install McAfee and it said their support that the question is related to the error in Device Manager.

  How can you diagnose errors in Device Manager

  Tried installing McAffee, but error message. Contacted McAfee... says the problem is in the Device Manager. How can I determine the error in Device Manager?

  Are you sure you don't have another Antivirus always installed; even an expired subscription?

  A lot of AVs will not install if they find one already installed (and you must have an AV installed in any case).

  Another problem may be how you try to install it:

  You need to download and save on the desktop > then right click on the saved files > select run as administrator.

  FYI: Here's how to look in the Device Manager:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  See you soon.

• Why won't my CD/DVD Slymtype player work, error: this device cannot start. (Code 10).

  Original title: why not my job as a player of DVD/CD of Slymtype at all?
  Here's what I have:

  SlimType DVD C DS24CZP ATA Device

  Windows Vista Home Basic

  Acer aspire 3680 series
  ------------------------------------------
  So here's my problem:

  Recently, I put a DVD disc into the drive. Then, once I closed it, it started to turn, then what sounds like a sound signal, spining, beeps several times, and this will be repeated for a few minutes. Once it stopped, it does nothing. You can not even here it spining. No AutoPlay starts, none Open box, nothing at ALL. The computer doesn't even recognize that there is a DVD in there.

  So, I advanced and found in the Device Manager. The picture showed it was a disc with a CD on top (representing is a DVD/CD player) and in front of it, there was a «!» So I opened the information for it. Here's what he said:

  "This device cannot start. (Code 10) »

  When I try to make windows to search for a solution, it came not with something. I tried to update the driver; no effect. Tried neutralizing him and he the reactivation. No effect. Tried unistalling and restart my computer. When he tries to install it, it fails.

  So now, I did everything I know. Does anyone know how to fix this without having to replace the drive itself? Or should I replace it?

  Thanks in advance!

  Hello

  Did you do changes on the computer before the show?

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Method 1:
  You can perform the steps in knowledge base article and check:
  http://support.Microsoft.com/kb/982116

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Method 2:
  You can also visit the links:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems