FF v28 loads very slow even on a screamingly fast PC brand new, virtually no load on the operating system. Patched Win7 640 bits and still slow.

Similar Questions

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• Applications are not loaded in the operating system 7 simulators

  Dear BlackBerry developers,

  I can't get my apps loaded into the OS 7 simulators. I use BlackBerry Java plug-in for Eclipse 1.3.0 and downloaded BlackBerry JRE 7.0.0.  I tried "Run as-> BlackBerry Simulator", but the application has not been loaded into the Simulator. In addition, although I had installed several OS 7 simulators, they are not listed in the peripheral dropdownbox of the Configurations run-> tab Simulator.

  I tried to load the app manually in the Simulator, but I couldn't it no more. Results expected - > Standard - > 7.0 folder contains a .cod file and many .debug files. I tried the .cod file, but it does not appear in the Simulator.

  Then I downloaded the BlackBerry Java plug-in for Eclipse 1.5.0 but still no application in simulators...

  I'd be happy if I have a suggestion here...

  Best regards

  Well, it turned out that I had too many image files in the res folder. Remove a few solved the problem.

  Also, re - install simulators in the directory where the older simulators made visible in Eclipse plug-in.

• BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

  Sorry if this is going to be a long post.

  I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

  I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

  He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

  So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

  I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

  It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

  What could have caused the reboots and error JVM?

  EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

  EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

  EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

  EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

  EDIT: I tried to load the operating system by:

  -remove the battery.

  -Connect to the PC.

  -Command prompt: command /nojvm loader.exe

  -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

  -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

  --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

  Just had my 9550's replaced and all of the good mother!

• Satellite A300-288 does not load the operating system

  Hello everyone.

  Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

  Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

  Thank you very much for your help.

  Start your laptop with F8 and test if you can start the operating system in safe mode.

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• Hello. I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove my hard drive and reload the operating

  Hello.

  I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove from my hard drive and reload the operating system with all the updates and load to the top of my existing software. All my software works except my Photoshop CS3, which I use most. I loaded the software disc and download online. The system of charge very well and activation is complete.  Here are the main things that don't work properly, I have noticed so far. First of all, I can't open my camera RAW (I can with my Lightroom software, but not with my Photoshop software?). So I can't open any of my files of digital camera? Second, I can open a .jpeg file and use the Photoshop software and I can save the changes, but when I turn off my calculated the software doesn't seem to be on my computer. When I go to Windows ' search program and files "software is not located here. When I go to "Uninstall" the software of the foldername is there it is. "Photoshop CS3" but there isn't any size file to it IE 400 MB, while my software "Lightroom" on the 'uninstall' section will have a file for example size 400 MB tied to it. Thirdly, I also have a photosoftware of B + W, which operated in Photoshop; It's "NIK software - Silver Efex Pro" and it is located in the subtitle of 'filter' of Photoshop CS3. I use Silver Efex and all functions are working properly, but I can't save the file, it does not save the changes to save.

  Please can you help me.

  Thank you.

  KEith

  Try the forum for Photoshop.

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• How to load the operating system of split hard drive D of Aspire5315?

  OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

  How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

• Failed to load the operating system

  Everything seems fine on my PC, except when the machine is started.  He dies, goes to a black screen with the message "Unable to load the operating system".  My work is about to reboot, F8, and then select the drive (South), and then press ENTER.  All right.

  I would return it starts normally.

  Any advice much appreciated.

  "Nirv999" wrote in message news: 09244f68-d2d5-4625-b676-a9e94668d58a...
  > Everything seems fine on my PC, except when the machine is started. He dies,
  > goes to a black screen with the message "unable to load the operating system. My work around
  > is to reboot, F8, and then select the drive (South), then press ENTER.
  > All right.
  >
  > I want to return it starts normally.
  >
  > Any advice much appreciated.
  >
   
   
  This sounds like the BIOS failed in a different startup command, or
  you have a USB key that tries to start and failed (for what is obvious
  reason!)
  -Make sure you have nothing plugged in USB ports except your
  Mouse keyboard &, if necessary.
  then try a cold start
  If it works, then plug your USB stuff one at a time, each reboot
  time - see that it causes.
   
  If it doesn't, then check the Boot in the BIOS order - to ensure that
  the CD and HD are the first two devices (up to you that who!) and who
  Activate you the option "other devices balance"if it's there. "
   
  See if that cures it.
   
  --
  Noel
   
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• Software for printing device Kodak esp7250 does not load as areas appear gray and Kodak said that it is a problem with the operating system 7

  I have problems trying to reinstall my printer software Kodak esp 7250.  The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path.  Of course, it's an invalid path because it will not choose an or allow me to choose one.  I contacted Kodak and after working with it for a while, they said it's a problem with the operating system.  I have Windows 7 on a laptop Gateway.  I need my printer and get very frustrated because nobody seems to know how to solve this problem.  I was able to use it when I got to the laptop, but suddenly one day it wouldn't work.  Help, please.

  Hello

  Thank you for your response.

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also advise you to check the status of the issue in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• I reinstall the operating system and I have to delete all programs, including photoshop and lightroom. I put it again and offered to buy them, even if I already pay for them

  I reinstall the operating system and I have to delete all programs, including photoshop and lightroom. I put it again and offered to buy them, even if I already pay for them

  In addition to the steps mentioned above, you can also try:

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• 'Library not found or failed to load' on the other system

  Hi all

  I searched a bit on the forum and found similar problems, but not really a solution. So I'll give a try with this post:

  I have two similar computers: Windows 7, 64-bit, Labview 2011 (service pack 1) is installed.

  And the goal is to acquire images of an acquisition card BitFlow.

  BitFlow software provided for the frame grabber, which has been tested for windows 7, 64-bit and Labview 2011. With a machine (machine A), the program works very well. No problem.

  On the other machine (machine B), Labview is unable to read the supplied library: after selecting the library in the library function node call, Labview gave the error 'Could not be found or failed to load library' on the node library function call.

  Machine b - in all my knowledge - the same configuration of all software compared to a machine, so I don't know what the problem is here. The only difference is that machine B has a different computer security protocol - but it has administrator rights...

  In addition, I tried a stand-alone executable file (and the installation program) who worked on a third computer, but not on the machine B - because of the same problem.

  Does anyone have an idea what direction am I looking for the solution? Or what may be the problem? Or what I'm missing here?

  Let me know if you need any additional info.

  Best regards

  Michael

  Haverdings wrote:
  "Library could not be found or failed to load." I guess this would mean a "failed to load" error (because the library is present), but I don't know that the 'fault' it is.

  Bitflow is installed by simply copying the files on your computer. No installer is required - even though they claim. Is there a way to check if the required version of the C runtime is used?

  Thanks for the replies

  Well, then the message could be more developed and make a difference file not found explicitly and not being not able to load, if LabVIEW would make some extra humba mumba woodoo, that's exactly what Windows shows a request when he tries to load a DLL. This code error, simply said, sorry, I could not load the DLL and that could be because it does not exist, but also because I couldn't load it for other reasons, such as the missing dependencies, (a corrupted OS or anything else). Not very useful to you, and I don't know LabVIEW must try to be smarter than Windows here, trying to see if the DLL actually existed. For all it's worth can be a text file or what is not a DLL, the DLL name!

  An interesting read that actually explains the problem a little more can be found here. You see that it isn't a problem of LabVIEW but just about anyones problem faced DLLs that can go just about anywhere.

  The best way to see what your DLL dependencies, is to charge with the program of the mentioned dependencies in this viewer. He has problems it is today on Windows 7 systems, but still can give you some useful information.

• My computer keeps giving me the blue screen of death... even after that I reinstalled the operating system

  I have an emachines W3644... it came originally with windows xp family, but I currently have windows xp pro installed. It worked great for 4 months, no problems or anything. I got it sitting speakers... speakers were not connected or hung. I don't know if this could hit anything or not? My computer has 1.37 GB of RAM and the graphics card is a NVIDIA GeForce 6100 nForce 405.

  Questions are... Well, he keeps just randomly bluescreening. There isn't really a reason as that why, I'm the only person using this desktop computer, and I really did something to do that. I have scanned with many different scanners, and they found simple things like false positives and tracking cookies, none of which is a big deal.

  I tried many things to fix this myself... but nothing has worked. I'm starting to wonder if it's something to do with the material?

  I tried many things... include system restore, using the last known settings who worked, and also something to do with the domain controllers, or whatever.

  No one has solved the problem. He continues to randomly bluescreen. Also, a few times I clicked on records and he told me that they were corrupt, and when I right click on them and click Properties, it says that this folder contains 0 bytes of data... when there is more than 1 GB of stuff in there. This is the folder where I put my icons of computer maintenance and other things in.

  Then I'll reboot it'll randomly blue screen while windows is loading, he'll also do to the logon screen and sometimes even after connection... sometimes I it will load everything very well and it'll be on the desktop and I will leave the room and return, and it will be on the blue screen.

  I'm not sure what to do at this point. I reinstalled windows... and he still bluescreens. I copied most of the error codes he gave me... If someone could tell me please what they mean, or be of any help that would be great. I tried a lot of things... even reinstall... and he still continues to bluescreen. I also unplugged then replugged... all that does not work either. I also tried in safe mode, even in safe mode it bluescreens, sometimes even during loading safe mode.

  Anyway... Let me just enumerate all the error messages I've written... Please look at and if you know what NONE of them speaks, please let me know. I just want to know what his question is... so I can hopefully do this fix, or at least get another or something.

  Here are the error codes I wrote last week.

  STOP: 0X0000008E (0XC0000005, 0 X 00000322, AA4D7C68, 0X00000000)

  It mentions something about my bios if I remember correctly...

  STOP: 0X0000008E (0 x 0000005, 0XC0000005, 0XBF8A58CB, 0XA84EE96C, 0x00000000) win32k.sys-address BF8A58CB base at BF800000, DateStamp 4a8564c7

  STOP: 0X0000008E (0 X 80000004, 0X8165CE81, 0XAF311B38, 0X00000000)

  STOP: 0X0000008E (0XC0000005, 0X805656DE, 0XB7AC9770, 0X00000000)

  BAD_POOL_Header STOP: 0 x 00000019 (0x00000020, 0XE210A998, 0XE210AA38, 0X0C14020D)

  DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1 (0X0001000C, 0 x 0, 00000002 00000000, 0X8A2D2700) wmaud.sys - address 8A2D2700 base at 8A2D2000, DateStamp 48025c3e

  STOP 0X0000008E (0XC0000005, 0X80564BB5, 0XA90F0C80, 0X00000000)

  PAGE_FAULT_IN_NONPAGED_AREA STOP: 0 X 00000050 (0 X 80898298, 0X00000000, 0X00000001, 0X8054BBB4)

  The BIOS in this system is not fully compliant ACPI STOP: 0X000000A5 (0 x 00000011, 0 X 00000007, 0XF771F180, 0 X 03000000)

  PAGE_FAULT_IN_NONPAGED_AREA STOP: 0 X 00000050 (0XBC99E00C, 0X00000002, 0X00000001, 0XAC9A203C)

  STOP: 0X0000007E (0XC0000005, 0 X 00002300, 0XB85E29F4, 0XB85E26F0)

  STOP: 0X0000008E (0XC0000005, 0X805454F3, 0XB9359B5C, 0X00000000)

  It's all the ones I copied. I tried to reinstall and still get errors. Please, someone tell me what these codes mean as soon as POSSIBLE.

  Thank you.

  If the RAM is only four months and you have identified that it is at the origin of the problems (e.g. the BSOD happen when only a single module of RAM is in) and then even after four months it can always happen.  Things such as ESD (Electro Static Discharge) or plug the RAM while it is still on the motherboard can cause these problems to happen... but they may or may not happen immediately.  The RAM could be faulty from the beginning, but has only gotten worse.  But unfortunately there is nothing that can make it work, if it is faulty, then it has to go back for a refund/replacement - as boring (and believe me, I know) that it is.

  0X000000BE normally concerns pilots in regards to the 0 x 00000050 - this normally either bad RAM, video memory, and bad devices (although not very likely) or bad memory Cache L2 (did not have a lot of people), but it can also be bad device driver software.

  I wish that the BSOD errors are actually more accurate as to describe what is at the root of the problem but they are not, and most of the time, it is by a process of elimination that we can solve the problems. However, I would say that if your original RAM works in the machine and you get only BSOD when the new RAM is in, then the new RAM is the culprit.

  Here's a little info on the RAM and it does: http://www.technologybasics.co.uk/WhatIsRAMAndWhatDoesItDo.html

  I hope I covered everything, but other questions, do not hesitate to ask :)

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my Web site | http://www.systems-and-solutions.co.uk - where I work

  
  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Windows Vista has crashed, "the operating system not found" error, can I load Windows XP on a partition?

  I have an Acer Aspire 5516, with pre-installed Windows Vista. I didn't know that it did not come with a recovery disk UNTIL my system crashed! During a routine virus scan, I got a blue screen saying a major problem has been found and the system has been shut down. I followed the instructions to gracefully shut down my laptop. When I turned this back on after the "Acer" logo he went to a black screen with info on my computer and the last line States "not found operating system". That's when I discovered there was no recovery disc & it is integrated into the system. To access this system you we F8 to enter safe mode, then Alt F10 to access 'erecovery management system. Neither one of these functions operate! Still getting the black screen with "operating system" not found I have a Windows XP my laptop previous. What I was wondering is if I can load on my Acer, possibly on a partition, in order to be able to get into my laptop and save all of my files? I'm terrified of losing everything I have! I have thousands of pictures that I can't replace. If anyone can help please do! I am on a very limited income & can not really afford professional help. Thank you very much in advance!

  Hello

  normally with an Acer you press Alt + F10 at startup to start the hidden recovery partition recovery, not F8, then this combo

  but you do not have an option to save your data, that

  in daily use acers normally have a system partition, a partition of data to save your data, etc. to and also this hidden partition recovery

  and read this on data recovery, too;

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

  read this information about method 3:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.