Get the C:\windows\PDCMOLR.dll module to start Windows XP.

Similar Questions

• When I run Adobe Lightroom 6, I get the error: AgTransitCargo_pushTransitCargo - wichitafoundation.dll does not start.

  

  I reinstalled Lightroom with the CD. Problem stays.

  Hi paulp,.

  Greetings.

  It seems that Lightroom makes a call to the AGkernel.dll file, this can occur when AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  • Re register AGKernel.dll with Windows: https://support.microsoft.com/en-us/kb/249873
  • Install all the updates that are available for Windows: Windows Installer updates
  • Uninstall and reinstall Lightroom to Photoshop Lightroom Installer (no CD)

  Let us klnow if that helps.

  Concerning

  Assani

• Cannot print the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL was not loaded"

  Original title: "Prop Res DLL not loaded".

  Try printing the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL not loaded" How can I load it? Typically get this message when I print review copy. My system is Windows XP.32 bits

  Hi Robert,.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Let's uninstall and reinstall the Lexmark X 1185 printer drivers.

  To uninstall the printer software, see the following link.

  http://support.Microsoft.com/kb/307895

  
  

  Restart the computer, visit the following link and install the printer drivers.

  http://support.Lexmark.com/index?ProductCode=LEXMARK_X1185&page=product&searchID=1368834464501&locale=en&UserLocale=en_US#1

  If the method above does not work, follow the steps in the next method.

  Method 2: Error Message When you try to print or save a document in OneNote 2007 or in Word 2007: "Prop Res DLL not loading" or "Cannot load Library DLBAPRP.dll"

  http://support.Microsoft.com/kb/918730

  Note: suggested above steps are applied to your scenario as well.

   
  

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can I use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage

  Please help I can use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage and the worl tour plan has a red cross on it can you help me solve this problem

  Hi susanearle,

  You can try the steps in your previous thread about this problem?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/have-wireless-connection-can-only-connect-from/12a7163c-A54D-4894-81F7-bd4fb92b2da4

  Please let us know, thanks!

• I started getting the message "windows Explorer has encountered a problem & needs to close".

  I started getting the message "windows explore has encountered a problem and needs to close" when I try to run my camera videos but there always used to work OK

  Hello Terry,

  I would recommend from your computer in safe mode to see if the problem persists. If you do not experience the problem in safe mode, it's probably caused by a startup item. To isolate the problem, please perform a clean boot. I also recommend scanning for infections and update your drivers.

  * I'm moving your thread to our performance under xp forum

• I get the message "Windows Movie maker cannot save to the specified location".

  I get the message "Windows Movie maker cannot save to the specified location".  I tried different places, to moved all the files in these locations, recreated film, enhanced virtual memory to computers at 8 GB and 47GB available disk space. Tried all options to the title of best quality, Best Fit, other settings and including the CD recording. But it still won't save as a movie to a project. I have 5 separate voice recordings, and a video with music incorporated for a total of about 24 MB. Help?

  Hi Mare Hausen,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the total size of the memory (RAM) installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Movie Maker 2 stops responding when you try to save a large movie file

  http://support.Microsoft.com/kb/814836

• Windows Media Player does not. I get the message "Windows Media Player encountered a problem while playing the file. For any additional help click web help. »

  Original title: Windows Media Player does not

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I have Windows XP Professional and have tried playing the CD through Windows Media Player. I get the message "Windows Media Player encountered a problem while playing the file. For any additional help click web help. "Then I do. Nothing here helps me. The player shows all my music but puts little red x showing that he can't play. Help! I downloaded version 11 of Windows Media Player, but it is saying the same thing.

  Thank you.

  Hello

  1. don't you also get an error with the message code?
  2 have you installed third-party readers part?
  3. What is the format of the files you are trying to play?

  Follow these steps and check if they help.

  Step 1:

  I would have you readers of third party temporarily Uninstall and check if persists it to the question.

  Step 2:

  Most likely you need codecs to play these files with Windows Media Player. I suggest looking up codec in the Internet that supports the file format, download and install them.

  See also:

  Player Windows Media for Windows XP supported Codecs

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See also:

  Windows Media Player Error Message help

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• Why am I not able to choose a wireless network? I get the message "windows cannot configure this wireless connection".

  Why am I not able to choose a wireless network. I get the message "windows cannot configure this wireless connection".

  When I go to network connections it shows: Wireless network Connection - connected, Shared Dell Wireless 1397 WLAN Mini - Card & connection 1394 - 1394 connected Net Adapter.

  How can I solve this problem.

  original title: 1394 connection?

  Hi ToddHenderson,

  You did changes to the computer before the show?

  Method 1
  I suggest you try the following steps:

  The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.

  I suggest you follow the steps below.

  
  Use Windows to configure wireless settings
  a. go to the start menu, then select run
  b. type ncpa.cpl, and then click OK to open the menu of the network connections
  c. Select your Wi - Fi connection service and choose the option change settings of this connection.
  d. go to the wireless networks tab and check use Windows to configure my wireless network

  
  Launch Windows Zero Configuration
  e. return to the start menu and select run
  f. type % SystemRoot%\system32\services.msc/s, and then click OK
  g. double-click the Wireless Auto Configuration option
  h., go to the startup type list, and then click Automatic. Click on apply to confirm the changes
  i. Accordingly, click Start in the Service status section click OK to apply the changes.

  Method 2
  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to format the memory card, I get the message "windows could not format.

  Original title: car micro sd problem
  
  Hello
  my laptop detects the memory card (after a good dose of refreshing it), but whenever I try to open it or scan or format, any area 'my computer' freezes. and, now my phone displays the message "no inserted memory card. I use a dell inspiron 1525 with windows vista sp2 with 3 GB of ram and and 230 GB hard drive.
  to get you in the loop, the songs on my memory card using previously to disappear on their own or used to go corrupt, so I decided to scan it. now, when I insert in my lappy, im facing this new problem. kindly helppppppppp me.
  PS - after several attempts, I had the option to put in shape, but after clicking on the option, I get the message "windows could not format.

  Hello

  You are able to use any other memory card with no problems on the same computer?

  Try to format it on another computer and check. If you are unable to format it on another computer then it is perhaps because of the corrupted memory card. You will need to contact the manufacturer for assistance.

• I try to uninstall itunes and I get the message"windows service install could not be accessed. can be installed incorrectly, how can I solve this

  Ive had problems with itunes, I guess to uninstall it. But I do every time I get the message "windows service install could not be accessed. can not be installed properly. How can I do to solve this problem. It is also difficult to install things, too

  Hello

  Try this FREE program to remove it

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  or track information from apple to the links below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  ____________________________________________________

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  ____________________________________________________

  Or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  ____________________________________________________

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• I get the message Windows Media Player: "windows media Player cannot find the file.

  I get the message Windows Media Player: "windows media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. To solve the problem, try to fix the link or delete the library item. "When I try to record several songs. I can play the songs so I don't know what link is broken. The problem started after I tried to play a CD using Nero Essentials. I have since uninstalled Nero from my computer but I still have the error message and can not burn a CD.

  Hello

  Step 1: Change the media files are automatically added to the library when played.

  (a) click the arrow below the Library tab, click More Options, and then click the Player tab.

  (b) to prevent media files on your computer or the Internet to be added to your library when you play, delete media files add to library when played check box.

  Step 2: Also rebuild the database of windows media player.

  Follow the steps in http://support.microsoft.com/kb/925718

  See also http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5260&id=C00D10BA&contextid=89&originalid=C00D10BA

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• get the fatal error when you try to start Windows 7 Easy Transfer...

  get the fatal error when you try to start Windows 7 Easy Transfer... what should I do?

  Hello Jo,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the full error message or code when you say, ""getting fatal error when you try to start Windows 7 Easy Transfer? '"

  Thank you for details on the issue.

  This problem may occur because of damaged or missing Windows files.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Is it possible to get the old windows 7 hard disk new?

  I have a pc hard drive has crapped out, and I'm looking to buy a new hard drive and I was wondering if I have to buy a new os or y at - it a way to get the old windows 7 on the new pc.

  Original title: a few questions about reinstalling windows

  If your computer is pre-installed with Windows 7, you should be able to use the product key located on the COA sticker that is attached to the system unit and reinstall Windows 7.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?