HDMI connection to an Epson PowerLite Presenter projector

Similar Questions

• How can I connect to my desktop to a projector, I have no vga or hdmi

  cables xps1

  Hi I wanted to help it with a type of cable, that I need to connect my desktop computer to a projector.

  my pc is not a normal vga conductor and he does not have a hdmi slot either. only usb and 1394 slots. Help, please

  Hello

  I'm not aware of any particular device that exists for this purpose. You need to find a particular cable, or a series of cables to get the connection. My first step would be to your store of more reliable electronic consumer goods, because they should have a selection of cables that may meet your needs. I would also check with the manufacturer of the computer.

• Option of surround sound clothes outside with HD4870 HDMI connection after installation of SP1 Vista54

  Clothes outside with HD4870 and HDMI connection surround sound option
  I just built an HTPC and installed SP1 Vista64 and I have a problem. I have a DFI LanParty very X 58-T3H6 motherboard and a VisionTek Radeon HD 4870 video card with HD audio. I have a HDMI cable to my Sony AV receiver and all I get is Audio stereo. The subwoofer never wakes from sleep, or AV receiver indicates anything but a stereo input.

  I have the RealTek HDMI audio device installed, and he says he's working properly in Device Manager. Under properties, what is proposed is stereo speakers. Surround sound is presented as an option, but it is grayed out and not selectable. All drivers are up to date from four days and I have the on-board sound card mother disabled in the BIOS and it does not appear in the Windows Device Manager, nor are there any other audio device except the RealTek HD HDMI audio device.

  Other HDMI devices, such as my XBOX 360, a surround sound very well via the AV Sony receiver.

  VisionTek support told me to install the RealTek HDMI driver, I did, but that's all the help they were able to give me.  The problem persists.  Surround sound is gray under sound properties for this device,

  I took the HDMI cable from HDMI port on the video card and plugged on my XBOX 360 and I get surround sound, so I know that the cable and the audio/video receiver is configured correctly.

  If anyone has an extra idea about it, I know you more!

  Thank you!

  Hi flattery.

  Thank you for taking the time to post.

  Can you please post here the result of your dxdiag in the forum?

  ·         Click on the Start Orb on the Office

  ·         In the Search box , type dxdiag and press enter

  Once you're in the DirectX tool, click Save all information and save on your computer. Open the saved file (must be a text file) and copy this information and paste it into the forums here so we can see again.

  1. What is the version of the BIOS that you run on your motherboard?

  2 have you ever had this installation or surround sound from always grey work?

  Please let us know.

  Thank you

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer Dell laptop doesn't detect the TV via HDMI connection.

  I have a Dell Inspiron N5110 with Windows 7 and a Samsung TV. Whenever I plug my HDMI cable, the only thing I see on my TV screen is No Signal. It is on the correct entry, but my computer still does not recognize the second monitor.
  I have connected my laptop to a front projector, and it worked fine.

  I had problems connecting my laptop before and then finished by needing a new hard drive... So I now have a new hard drive (cool!) but I can not determine what the problem... In devices, Graphics Manager, it says Intel(r) HD Graphics Family and Standard VGA Graphics Adapter. The other has a small yellow triangle with an exclamation point, but when I ask Windows to see if it's updated, it says that Windows has determined that it is up-to-date.

  Help, please!

  I had the same problem as you. Initially, I went to dell drivers

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-15R-n5110/drivers

  video and downloaded the driver Intel HD Graphics 3000, but that wasn't enough. Yet once my HDMI has not been recognized. I had to also download the same file, the nVIDIA GeForce GT 525 M Graphics Driver (it was my graphics card, if you have the ATI card you download driver ATI). When I installed the last, I was ready to go... Download and install these two drivers and you will solve this problem!

• No sound from the HDMI connection Toshiba Bluray player BDX2100

  Hello

  I'm a newbie so I don't know if I'm in the right room or not, I want to ask that I have a Toshiba Blu Ray player model number or to number BDX2100 I have set up my fine reader TV and blu ray.

  There is one thing when I play my TV to HDMI 1 or 2, the image appears but there is no noise at all when I go on the Blu Ray in the audio settings menu it says 2nd audio or something to do with the HDMI is turned off.
  Oh I'm 100% sure and my tv is Sharp Aquos LC-22LE320 is not the TV because when I put the SCART lead in or put it on AV it works fine.

  The only problem is the sound with HDMI connection. If anyone can help, it will be very happy because it has been me bloody crazy.

  -musicman1982

  Hi mate

  It is a Toshiba computer / laptop computer forum.
  You will meet people who want to talk about options for laptops and Toshiba laptops.
  I doubt anyone here would be able to help you with this drive blueray.

  But in your case, I would first check the settings of the TV you.
  Check whether the sound via the HDMI port is enabled.

  > in the settings audio, it says the 2nd audio or something to do with the HDMI is turned off.
  I don't know why 2nd audio is mentioned there but maybe you should check if you can switch this 1 audio (audio main stream) m

  I recommend also consulted this blueray Player user manual.

• Satellite Pro L770 - how to activate the HDMI connection?

  I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with +, but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.

  Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?

  Thanks 4 your help.
  Tom

  Hello

  Hmm, in some cases the BIOS contains an HDMI output option.
  In your case, I recommend to check this.
  I have not very well if this available but it s m of a value in a control.

  But usually the Fn + F5 should work as described in the user manual... did you check that?

• Qosmio G50-129 no sound with HDMI connection

  Hello.

  I have a Quosmio G50-129. Recently, I tried plugging it into my Sony Bravia LCD TV via the HDMI connection.
  I have video output but there is no sound on the TV.

  I tried to set the HDMI as audio device as default and the sound level meter in the sound properties panel appears to show activity, but nothing comes out.

  Can anyone help?

  Hello

  I m not Qosmio G50 owner, I only have the small F50, but it must be identical to yours I think. So first of all, I must say that I never had a problem with the HDMI connection. Everything has worked perfectly since I used the HDMI connection, the first time

  In any case, if you connect your laptop to an external monitor or TV using the HDMI connection, connect the cable first. After this power on the TV and select the HDMI input right channel. Then go on your laptop and if you press FN + F5, you can change between the different options.

  Normally the HDMI output is automatically set as the default audio device, not to follow these workarounds with good screenshots:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

• TV does not recognize the HDMI connection

  I put Windows XP on my PC instead of Windows 7. I installed so I thought that all the correct drivers but my TV does not recognize a connection when you use an HDMI cable to watch movies via my laptop. I want to be able to drag the window on the tv screen to watch a movie and still use my phone for other things.

  Please help me.

  Hey Buddy,

  Here in the forum there are already a lot of discussion about the HDMI connection. I would recommend checkthing these discussions that might be useful:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=236993𹷁
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=232961𸸁
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=234457𹏙
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=230999𸙗

• Satellite program-112 P775: HDMI connection to the TV does not work

  Hello

  For some reason that the HDMI connection between my Toshiba Satellite P775 program-112 to LG TV no longer although he did for some time.

  I tried another laptop without problem.

  I posted the same question some time ago and told to press the Fn and F5 keys, but it did not work.

  Any suggestions please?

  You are right: the FN + F5 switches between the internal and external video output.

  What exactly happens when you press FN + F5? A map falsh menu appears on the screen when you use this key combination?

  On the page of the Toshiba UE driver you can find the Manager command HDMI. This driver is required for your HDMI controller.
  In the case where the output to HDMI does not work, try reinstalling the driver

• Satellite A-L50-1DF - sound distortion using HDMI connection

  Hi all

  Recently, I bought a new laptop, a Toshiba Satellite L50-A-1DF.

  From the beginning, I experienced problems with the HDMI connection.
  When I connect my laptop to another monitor via HDMI more often than not, the sound is tinny and slightly distorted.

  When I unplug the cable and put it in a few times, most of the time solved the problem.
  I used different HDMI cables and different monitors with the same effect.

  Other laptops work fine with these cables and monitors.
  I reinstalled the drivers to display without a bit of luck and will eventually be sent my laptop in for repair.

  Unfortunately, the problem was not found when they looked at it and I'll it back without a repair.

  I have no idea what could be the problem, because it is not found by the repair team.
  The customer service is unfortunately reluctant to me more help.

  Can anyone think an explanation to this problem?

  Thank you very much in advance for your comments!

  Kind regards
  Natasja

  > I have no idea what could be the problem, because it is not found by the repair team.

  This means that the technician did not notice the sound distortion.
  I think that it s very difficult to solve a problem that is not reproducible.

  In my opinion, you should check exactly when this question appears and must try to reproduce the HDMI sound problem.
  You should concentrate on the audio source and the software that runs when you connect the laptop to the external monitor TV.

  Also I recommend that you perform the tests after the system has been recovered to factory settings.

• Satellite L650 - HDMI connection for external monitor

  I've linked the laptop to my Sony LCD TV via HDMI, no problem. I have a (Acer, 24-inch) LCD monitor that has a HDMI port also. I used it to play ps3 and xbox360 via HDMI connection, no problem. I have two lines HDMI 1.3. The two lines are working without any problems.

  However, when I connect my laptop to my LCD Acer just external LCD monitor can t work properly. I can barely see what is display on the monitor, very snowy. It's hard to describe. I took a photo but don't know where to download it here.

  I tried both HDMI lines, but both failed. I tried to change a few settings in the laptop, but nothing makes any difference. I'm looking for the driver for video card on the Web from Toshiba website and found that my current license is updated.

  I'm not a tech geek, but I think that I don't know something on the computer. Am I missing something here?

  Guys (and girls), please throw in an idea (tooth tell me to check if the connection is good, I don't already).
  Thank you

  Hey,.

  If you connect your laptop to external monitor and press the FN + F5 key combination what happens exactly? Pressing the FN + F5 key combination shows different options and you should test with external monitor only (not the clone image). If you work on external monitor doesn't do this work?

  In addition, you must connect the devices before starting their.

  Also, take a look in the BIOS and try to load the default settings. Make sure that that the HDMI cable is connected before starting Windows and check the status again.

  By the way: what operating system are you using exactly?

• HP Pavilion Elite e9220y: HDMI connection problem

  I can't get my computer to connect to my monitor (HP w2338h) in hdmi mode.   The graphics card is the original of the computer (Radeon HD 4350) that I'm looking for upgrade to a Radeon HD 6670, but I had no input (black screen) when I went from cards.  I have given the old card and OSD have the HDMI input, but it will connect only in VGA mode.   My drivers are up to date.  I replaced the HDMI cables and neither one works.  I have reset the monitor to factory settings in the OSD.  I'm stuck with a new video card that I can't use.

  I also moved the card wifi to a new expansion slot to make room for the largest video card.  When I handed my old video card, I discovered that I lost my internet connection until I moved the wifi card to its original expansion slot.  It's a whole other issue...

  Should I just an old dog that doesn't hunt anymore?  Otherwise the thing is what I need to do business.  For the games... Well well... not so much!

  Thanks in advance.

  Dear customer,
  
  Welcome and thanks for posting your question on the Forum from HP Support.

  Please see this article by HP "setting your monitor upward."

  http://saw.CCE.HP.com/km/saw/view.do?docid=emr_na-c01643091 & HSID = 65324518 & sz = 19657

  The web link above, they showed the steps for the HDMI connection, which should help you isolate the problem.

  Hope this helps, for other queries in response to the post and feel free to join us again.
  
  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Atrix HDMI to laptop computer Vaio HDMI connection does not

  I adapted my Atrix on the multimedia dock, connected power and then connected to the mm HDMI cable anchor on my laptop Vaio HDMI, I have read and understood the firefox browser should be launched directly, but did not, I missed something?

  By the way, I have the kit multimedia motorola set.

  Advise me please.

  Thank you

  There are few things mingle here:

  1. the webtop is initiated when the Atrix is connected to the HD multimedia dock and the dock is connected to the TV via HD.

  2. the webtop includes the full version of Firefox running a customized version of Ubuntu

  3. connect multimedia dock via HDMI to laptop will not work because this HDMI connection on the laptop, the output not in. Also, why put phone firefox on laptop? Just open firefox on the laptop.

  4. connection from computer to phone via USB will launch all apps on the phone. Which allows to "Motorola Phone Portal" (when USB connected) will cause the computer's browser to open and gives you access to some data of the phone - Contacts, SMS, photos and let you handle these things via the computer.

  5 Motorola has another application - Motorola Media Link; You can download and use to manage music and movies.

  6. If you want to use the webtop application when it is connected to a TV, you can, but it takes the phone to have turned on WiFi or an approved carrier data plan - if you want to use internet applications.