Help ASA Configuration
Need to know what is the specific command on natting a to another ip address via a port number. Here's an example of what I think it should be, but can not find the correct verbege.
What I listed which opens an investigation.
access-list 101 extended permit tcp any host 68.156.91.20 eq 23032
Here is what I see, but I know the verbage is wrong or I'm missing something more.
access-list 101 extended allow ip 74.165.236.76 255.255.255.248 68.156.91.20 255.255.255.224 eq 23032
Please help?
That's exactly right. Note that when you look at the config it will replace it with this line:
access-list 101 extended permit tcp host 74.165.236.76 host 68.156.91.20 eq 23032
When you write the ACL you can enter 255.255.255.255 or precede IP address with the host keyword.
Tags: Cisco Security
Similar Questions
-
I do not have "Firepower of ASA Configuration" menu in ASDM
Hello
I do not have "Firepower of ASA Configuration" menu in ASDM.
I already configured IP to the management port 0/0 10.226.24.181 also to the 10.226.24.130 of the SFP Manager.
I can ping 10.226.24.130 ASA CLI and have tab in ASDM (with https://No DC configured the button).
You can see in attachment
Help, please
You have an ASA 5525 - X and the module of firepower is 5.3.1 - 152. To manage the power light module on that platform via ASDM requires the runtime current software 6.0 or later version (and your ASDM must be 7.5 (1.112) or later version).
Reference: http://www.cisco.com/c/en/us/td/docs/security/asdm/7_5/release/notes/rn7...
If you want to upgrade the module of 5.3 to 6.0 and you do not have fire power manager, then the way ahead is to reimage using the 6.0 system images and boot. This procedure is illustrated below:
http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...
You need the images available here:
https://software.Cisco.com/download/release.html?mdfid=286271172&flowid=...
Expand the tree on the left and look under all versions 6.0 > 6.0.0. Use the files asasfr-5500 x-boot - 6.0.0 - 1005.img and asasfr-sys - 6.0.0 - 1005.pkg.
After getting it to work, you should also update further the the latest version (currently 6.0.1).)
-
I need help for configuring security for my wireless again.
Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.
original title: Wi - Fi Protected AccessHi dmcangus,
See the Microsoft articles below for more information on WPA wireless security.
Configure Security Wireless WPA for home networks
http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security
Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP
-
Need help to configure VPN NAT traffic to ip address external pool ASA
Hello
I need to configure vpn NAT ip address traffic external pool ASA
For example.
Apart from the ip address is 1.1.1.10
VPN traffic must be nat to 1.1.1.11
If I try to configure policy nat or static nat ASA gives me error "global address of overlap with mask.
Please, help me to solve this problem.
Thank you best regards &,.
Ramanantsoa
Thank you, and since you are just 1 IP 1.1.1.11 Polo, the traffic can only be initiated from your site to the remote end.
Here is the configuration of NAT:
access list nat - vpn ip 192.168.1.0 allow 255.255.255.0 10.0.0.0 255.255.0.0
NAT (inside) 5 access list nat - vpn
Overall 5 1.1.1.11 (outside)
In addition, the ACL crypto for the tunnel from site to site should be as follows:
access-list allow 1.1.1.11 ip host 10.0.0.0 255.255.0.0
Hope that helps.
-
Helps to configure a Cisco 4402 wireless controller
Hello
I need help setting up a Cisco 4402 Wireless Controller. I want to have users automatically connect to the wireless network, but not to have access to all the resources network until they open a web browser and provide their domain user name and password or a guest account provided by the receptionist.
I tried many different configurations but can't seem to make it work properly. More time then not when I put on the WIFI network security it causes my wireless network to disappear from the list of wireless avaialbe.
Here's my network configures:
1 - 4402 wireless LAN Controller
2 - Aironet 1130AG antennas
1 - 5510 cisco ASA
1 - 4503 core Router\Switch
8-2960G switches
Windows domain Server 2003 with RADIUS running on the domain controller.
Thanks in advance for the help.
Glad you got it working...
-
Need help with configuration on cisco vpn client settings 1941
Hey all,.
I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...
If anyone can help with orders?
I need the installation:
user names, authentication group etc.
Thank you!
Take a peek inside has the below examples of config - everything you need: -.
http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html
HTH >
Andrew.
-
Help please - configuration VPN AnyConnect crossed
Hi there, forgive me if I missed all the protocols forum because this is my first post.
I am trying to configure an AnyConnect VPN and I think it's nearly there, but not enough yet. When I connect from an outside network, it gives me the following error '... No address is available for an SVC connection. I checked the pools of addresses and what I see, they are assigned to the profile. I'm doing it also crossed, I all VPN traffic through this router... traffic LAN and remote Internet sometimes when I'm on the unfamiliar wifi hotspots. I tried to get this to work for more than 1 week with a lot of different forums to scouring. I have included my config running for anyone to help me with. I appreciate a lot of the answers to get me on the right track. Thank you.
Update 15 minutes later: I posted my SSLVPN IP pool to the DefaultWebVPNGroup and it connected but I was unable to browse the web or ping network resources. I would like to disable the "DefaultWebVPNGroup" without any consequences for the installation program. What I still have to disable?
-------------------------------------------------------------------------------
Output from the command: 'show running-config '.
: Saved
:
ASA Version 8.4 (2)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
192.168.123.1 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
boot system Disk0: / asa842 - k8.bin
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 208.67.220.220
name-server 208.67.222.222
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
the purpose of the tcp destination eq https service
the purpose of the tcp destination eq pptp service
the purpose of the service tcp destination eq www
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
the purpose of the tcp destination eq https service
the purpose of the tcp destination eq pptp service
outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_1 all 192.168.123.0 255.255.255.0
inside_access_in list extended access allow the object-group 192.168.123.0 DM_INLINE_SERVICE_2 255.255.255.0 any
allow a standard ACL1 access list
ACL1 list standard access allowed 192.168.123.0 255.255.255.0
access-list nat0 extended 192.168.123.0 allowed any ip 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 192.168.132.50 - 192.168.132.60 255.255.255.0 IP local pool SSLVPNpool
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 645.bin
don't allow no asdm history
ARP timeout 14400
NAT (exterior, Interior) source Dynamics one interface
NAT (inside, outside) source Dynamics one interface
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 76.x.x.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.123.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd dns 208.67.220.220 208.67.222.222
dhcpd outside auto_config
!
dhcpd address 192.168.123.150 - 192.168.123.181 inside
dhcpd allow inside
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow inside
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.3054-k9.pkg 1
AnyConnect image disk0:/anyconnect-macosx-i386-2.5.3054-k9.pkg 2
AnyConnect enable
internal group SSLVPN strategy
SSLVPN group policy attributes
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
by default no
the address value SSLVPNpool pools
WebVPN
AnyConnect Dungeon-Installer installed
time to generate a new key 30 AnyConnect ssl
AnyConnect ssl generate a new method ssl key
AnyConnect ask flawless anyconnect
attributes of Group Policy DfltGrpPolicy
value of server DNS 208.67.220.220 208.67.222.222
client ssl-VPN-tunnel-Protocol
username Vxxxxx ZyAw6vc2r45CIuoa encrypted password
username Vxxxxx attributes
VPN-group-policy SSLVPN
client ssl-VPN-tunnel-Protocol
admin password 61Ltj5qI0f4Xy3Xwe26sgA user name is nt encrypted privilege 15
username Sxxxxx qvauk1QVzYCihs3c encrypted password privilege 15
Sxxxxx attributes username
VPN-group-policy SSLVPN
client ssl-VPN-tunnel-Protocol
tunnel-group SSLVPN type remote access
tunnel-group SSLVPN General attributes
address (inside) SSLVPNpool pool
address pool SSLVPNpool
Group Policy - by default-SSLVPN
tunnel-group SSLVPN webvpn-attributes
allow group-alias SSLVPN_users
!
!
!
World-Policy policy-map
class class by default
Statistical accounting of user
!
service-policy-international policy global
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:989735d558c9b1f3a3a8d7cca928c046
: end
----------------------------------------------------------------------------------------------------
Thanks again to all.
To access the internal resources of VPN, here's what needs to be configured for NAT:
obj-SSL-pool of network objects
192.168.132.0 subnet 255.255.255.0
object obj-Interior-LAN network
192.168.123.0 subnet 255.255.255.0
Static NAT obj-Interior-LAN obj-Interior-LAN destination source (indoor, outdoor) obj-SSL-pool static obj-SSL-pool
I also advise you to remove the following statement of the NAT:
NAT (exterior, Interior) source Dynamics one interface
If you want all traffic internet VPN to be routed to the tunnel, then here's the NAT config:
object obj-SSL-internet network
192.168.132.0 subnet 255.255.255.0
dynamic NAT interface (outdoors, outdoor)
And finally, you cannot disable the group policy by default 'DefaultWebVPNGroup '. So that when you log-in, you chose
SSLVPN_users group of tunnel, which will apply SSLVPN automatically group policy that you have configured explicitly that.
I hope this helps.
-
32L4333DG TV - need help with configuring WLAN
I bought a flat 32L4333DG of Toshiba, but cannot configure the wireless connection.
Help me please.Message was edited: assignment has been translated
What's the problem? Have you read the instructions in the manual how to connect WiFi TV?
There are 3 different methods to configure the WLan configuration:
_1) easy Setup (WPS) _
+ If the AP is WPS compatible, this method can be used. +
+ WPS is a standard of the industry, designed to facilitate the wireless LAN connection and security settings. WPS automatically configures all the wireless settings. +
+ NOTE: WEP encryption is perhaps not able to configure through easy implementation. +_2) assisted Setup (installation using notification s AP information) _
+ Name network, authentication and encryption are decided according to the information provided by the AP. You can manually set the security key. +
+ The security key must conform to these conditions: +.
+ TKIP/AES: ASCII 8-63 or 64 Hex characters +.
+ WEP: codes ASCII 13 5 or 10 or 26 Hex characters +.
+ There's a key ID to set for the WEP encryption. +_3 _) manual configuration (manual entry of all parameters)
+ Some types of encryption are only compatible with specific authentication types. +
+ When authentication is an open system, only WEP or none is compatible. +
+ When authentication is shared key, WEP is compatible. +
+ When authentication is WPA - PSK or WPA2-PSK, TKIP or AES is compatible. ++ When the inconsistent authentication/encryption pairings are detected, a warning message will be displayed and no connection attempt will be until the conflict is resolved. +
+ There's a key ID to set for the WEP encryption. +
-
Help text Configuration file reading
Need help...
I try to do a VI that will read a simple text configuration file. The file will have entries like:
URL = 192.168.0.1
Port = 9000
What I want to do is read the line and 'analyze' in 2 channels. Then, based on the content of the first string (the part before the = sign), do something with the second part (after the =).
I managed to open the file using "File open/create/replace" and but will have problems reading "Scan From File" to pull strings (it seems to define a mistake when I read in the first line, although my probes show that I had two channels).
Anyway, once I have my 2 strings, it is a simple 'case' as the structure that I can use to search through all my "pre-defined first?
Do not build something new. Just use the file Config screws - check under file IO functions. They will do exactly what you want.
Mike...
-
HP C4580 not scan to PC. I need help to configure my Netgear router please :)
Hello
I've read here, the threads that talk about this printer prints only not to or from a PC - my problem is that the C4580 go scan from my PC, but will not scan to PC.
I found an answer from someone who has had the same problem earlier this year, but I do not understand what to do.
Here's the answer:
"I have ordered mine entering the settings from my router (Netgear) page and setting the built-in firewall rules. "The internal firewall was blocking the printer, I could print, scan using the computer, just could not scan from the printer to the computer.
Also, I have a Netgear router, but could do with help on how to do the same thing as the person above.
Thanks in advance for any help!
Sorry, I don't need help after all
It was not the router requires a configuration, it is the firewall that was a block that should be changed to "allow".
My "all-in-one" now does everything it is supposed to do
-
RE: router wrt310n - need help for configuring wireless security
I can get wireless if the router is not secure, but cannot configure wpa and wireless security. Instructions followed on linksys tutorial but still connect wirelessly if I select wpa security. In addition, I can't find a way to change the ssid, the pages of router do not match documentation. The version of my router is v1. Is this obsolete, I know that there is a v2. Any help will be appreciated.
Please follow these steps to configure the wireless settings and try to connect to the wireless network.
Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
For wireless settings, follow these steps: -.
Click on the Wireless tab
-Here, select manual configuration... Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...-Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...
For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.NOTE: The password must be more than 8 characters...
Click the settings advanced wireless
Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
Now let's see if you can locate your wireless network and try to connect...IF YOU ARE NOT ABLE TO CONNECT TO THE RADIO
-
Need help to configure the VLAN on a powerconnect 5448
Hello world
I am currently working on 2 switches PowerConnect 5448 but I'm completely lost in configuring VLAN.
My bow:
My needs are:
-J' have 2 different networks that need to be isolated in different VLANS
-I want to port 11-14 to use for network backup, all others must be used for the production network.
-This 2 networks must pass through the port 48 (fiber)
How can I configure this kind of network on the powerconnect interface (or via telnet)?
My understood are the following, I have to create 2 different VLAN tag all ports, switch to safe mode all ports of the entitlement each port to the VLAN voted. Am I wrong?
How the fiber port?
Thanks in advance for your help on this matter.
Since your 2 VLAN need not communicate with each other, you should be able to get this working.
The easiest way to do this would be to have your production on VLAN 1 and VLAN 2 second network.
Assign an IP address to the switch with the command IP #.
Assign a default gateway with the # ip default-gateway command.
Create a VLAN 2:
Database console (config) # vlan
Console (config - vlan) # vlan 2
Set 11-14 ports to access the mode for VLAN 2
Console # switchport mode access
Console # switchport access vlan 2
Set 48 on trunk or general mode ports.
Console # switchport mode Trunk
console # permit trunk switchport vlan add 2
You should get pretty close to a work environment. You may encounter some problem with VLAN 2 contacting 192.168.1.0, maybe just need to put it up and test.
Here are a few links to software packages and manuals that can help.
Firmware.
Manuals.
Keep us on how will your configuration.
-
Help to configure the router Cisco 1941
Help!
I just bought a router cisco 1941, I understand, it came with the Cisco CP, but I don't know how get you to the part where I can use it.
Also, how can I connect to the router directly without using the HyperTerminal console, all I want to be able to do is configure the address IP of the ISP and my IP address so I can use it for surfing the internet.
Help, please.
Hello
Thanks for the screenshots and show the output! You will need a few lines of command for CCP to work:
Configure the terminal
username username privilege 15 secret PASSWORD
IP http server
local IP authentication
Sent by Cisco Support technique iPad App
-
Please help to configure the router for internet connection 871W!
Hello world!
I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.
I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:
ISP IP: 76.114.54.255
SUBNET: 255.255.248.0
GATEWAY: 76.114.48.1
DHCP: 69.252.97.4
DNS: 75.75.75.75
75.75.76.76
If you can, please help! Thank you!
Hi david,
Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation
you could ask your ISP to perform a reset/clear MAC add and try again?
also, kindly post lastest "show run".
Edit: just to see you've updated your screenshot. could you add command under 4
Mac-add 0001.4af9.8b83
-
Need help with configuration of VLAN SF300-24
Hello
Let me Preface this with the fact that networking is certainly not my point hard, so here, any help is greatly appreciated.
I'm trying to segment on a virtual desktop on its own VIRTUAL local network infrastructure using a Cisco SF300-24 Layer 3 switch. I can get the switch to connect to the network with the assigned VLAN 1 an IP address on the subnet of the network (192.168.16.X), but I can't get anything this is set up VLAN 20 (192.168.20.X subnet) to connect past the VLAN 20 (192.168.20.254) gateway IP. The ports assigned to 20 VLAN are defined to access the mode if it matters.
Here is a diagram to illustrate what it looks like, as there is another (L2) switch involved.
So I'm not really sure what I am missing here since all settings seem simple enough.
Hi Simon, I recommend you remove any server active directory and essentially remove all safety factors. This will give the idea of where to start.
If you take a quite basic set, 2 Windows 7 workstations without a Firewall window activated, they both work as expected.
It must be remembered that in firewalls, even if they are able to respond to ICMP if the request is from a different subnet, they will not be because he is recognized as a network abroad. You must know the network on these computers or make sure the computer does not care.
You may be able to do this by simply adding additional subnets on the advanced configuration of the network card (if it does not take too much address space) as an example.
Or well, as you have discovered that you can add routes, which is a bit heavy and inconvienent, but effective.
-Tom
Please mark replied messages useful
Maybe you are looking for
-
I clicked on an order of Garage Band, and I started to download then break it. I don't want to. What can I do to cancel this?
-
My Satellite M30 is unbootable
Hello I have a laptop M30 and it was a good laptop, but one day suddenly it crashed. When I start the laptop, nothing happens and the Power Led switch on the battery and power the conection too. Not just what message appears on the screen, the screen
-
TIP: How to increase the longevity of your battery IdeaPad Yoga 2 Pro
You want to increase the longevity of the battery in your Yoga 2 Pro?
-
my email has a pop up according to my email seems to be junk?
So why in the world I try and send a normal email and get a pop-up message indicating the filters have detected this spam and prevents me from sending emails all of a sudden? Welcome to the 21st century where nothing works anymore.Paul GrahamSan Fran
-
Cannot update Windows Vista, with the update functionality.