HP 8500 910 has

Similar Questions

• OfficiJet 8500 910 has scan "fails" using Mac 10.10 Yosemite.

  Now that I have installed Yosemite 10.10 my OfficeJet 8500 910 a, connected wireless, is unable to run a scan.  When to access the scanner via the Capture of Image or system preferences utility start > printers and Scanners, I get the message "cannot open the session on the device.

  I followed the steps on the HP site to make sure that I use the latest HP drivers.  The scanner was working fine in the Mavericks.  The printer features seem to work very well.

  Thanks for your suggestions.

  Hi @LGGeiger

  I understand that you can scan is no longer since the upgrade to Yosemite 10.10.

  Please follow the following steps and let me know the results of your efforts;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• OfficeJet Pro 8500 910 has continuously check printer displays. This process may take several minutes

  If I print a box poster jam or the paper tray problem, but they are fine. What is the solution?

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  http://support.HP.com/us-en/document/c02142414

  Good luck!

• HOW TO REMOVE AND REINSTALL THE OFFICEJET PRO 8500 910 PRINTHEAD

  HP OFFICEJET 8500 910 PRINT HEAD ALIGNMENT FAILED. HOW TO REMOVE & REPLACE THE PRINT HEAD. I READ THE USER GUIDE THAT SAYS LIFT TOP AND THEN LIFT THE PRINTHEAD. UNFORTUNATELY WE YOU SAID NOT HOW TO PROCEED. I OBVIOUSLY DON'T WANT THE LID ON THE GLASS... THE PHOTO SHOWS TOP RAISED COVER AND ACCESS THE PRINT HEAD. HE DIDN'T THERE HAS NO ACCESS TO THE PRINTHEAD WITH THE LID RAISED!

  Hello

  Please click http://support.hp.com/us-en/document/c02257580 to access the procedure which should solve the problem.

  Please refer to two Solution.

• Yosemite and hp pro 8500 910 and envy 4500

  I plan to update on the new Mac os 10.10 Yosemite.   Will be my Officejet pro 8500 910 a and printer Envy 4500 AIO units on this bone function?   Drivers and software for this operating system is not on pages with HP support.

  Everything works fine with Yosemiti on the 8500 officejet pro and the envy of 4500.  I had no problem without either wireless or wired in either print or digital projects.

• HP officejet pro 8500 910 a guard cleaning print head

  HP officejet pro 8500 910 a constantly clean the print head after replacing cartridges inkt (original)

  This happens after each power off/on. I can't stop the process by opening the doors, etc. Could not understand what did the trick.

  The new cartridges are already half empty.

  I did all the configurations, calibration. All the test pages are superb and I still suffer from the issue.

  In this forum, someone (Dutch) had exactly the same problem.

  I hope that someone from HP is able give me some tips.

  Hello there @qtoigoo ,

  I understand that you are facing a problem with your Officejet 8500 continuously clean the print heads. Normally, this occurs if the print heads are going downhill. My best advice to you would be to try clean the contacts on the print heads manually and reset of the printer. Who can help.

  Here is a guide with the relevant instructions: print head issues

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

   

  I hope that my post was information!
  

   

  Have a wonderful day
  

• hp officejet pro 8500 Mac has 910

  I've recently updated to Mavericks OSX 10.9 and now my iMac can't find our HP 8500 a (910 a) and installing the driver did not work.  It is not even appear on the list of available printers?  Any suggestions for Mac users?

  No problem MacMimi,

  Let's unplug the USB cable from the printer, leave the printer on and unplug the power cable, and then stop the Mac. After a minute and reconnect the power cable printer to turn back on the computer.

  Once the computer is back on, return to printing and scanning from the preferences system and then connect the USB cable to the printer. If the printer doesn't appear, there will be a few causes. It could be the USB cable, the port of the computer or, possibly, the port of the printer. Try another port on the Mac, if the printer still doesn't appear, try a different USB cable. If the problem persists, I can't believe that the USB port on the printer has gone wrong.

  Keep me posted.

• How to scan a legal document size on the office jet 8500 hp has more all in one that you use?

  I need help in a legal size document scanning, when I try to scan scan only letter size, I do not know how to change the scan of a legal size scan on my officejet 8500 has more all in one printer

  To scan legal-size documents I advise to use the software that must be installed with the printing of HP scanning software. Once you open the scanner, there should be an option on the top of the window to select it scan the area. Choose "Legal (8.5x14)" and continue as usual. You want to scan from the tray as well and not from the ADF. Here is a document on the analysis of HP:

  http://support.HP.com/us-en/document/c03476857

  Keep me posted and let me know if that helps!
  

• p6310f reading of RAM PC3-8500 but has installed PC3-10600. What gives?

  Here, I'm confused.  I bought your desktop p6310f with 6 GB of RAM.  I couldn't resist the temptation to fill the fourth slot with another stick of RAM, so I ordered a 2 GB of RAM PC3-10600 from Newegg key since it is what the three sticks that are installed in the machine - I removed the cover and looked. After installing stick I checked to see if it was ok by CPU - Z and SIW, and saw that the system has acknowledged the new stick (Patriot) PC3-8500.

  I called the Patriot - and actually spoke to a person, who said that the system could be down the RAM because of a stick "odd" as opposed to a pair that would be preferable, though even there is no support dual channel on this system.  He also said he could be a limitation of the motherboard, and he said that HP have been difficult to resolve.  He told me to remove the three original sticks of RAM and install just the food a stick to see if she would recognize him as PC3-10600.  I did what he said, and the computer recognizes the stick as PC3-8500.  I tried to call food back but could not get through.

  I removed the stick of Patriot and reinstalled three sticks of oem.  When I went into the BIOS it says that I have now three sticks of memory PC3-8500.  WHA -?  PC3-8500 all along was, and I didn't know?  She changed something by installing the stick of Patriot who will not change by itself unless I have reset the CMOS?

  I went to a local Best Buy today where they had their version of this machine (p6310y) on the screen, but I could not get into the BIOS.  Guess they don't want not customers bricking the system...

  A favor please, someone with a p6310f and who had not touched the RAM again: start the machine and go into the BIOS.  The first screen will tell what he has memory, the real rating-PC3-8500 MB or PC3-10600.  I suppose it's possible such HP got a good deal on these sticks of RAM, they put 'em in machines where their potential is not used.

  TIA

  Larry

  Bristol, TN

  Larry, this is the Product Specifications page for the computer.  If you look in the section titled "Memory", it shows "sustained speed PC3 10600 MB/s (message as PC3 8500).  It's a little confusing.  However, it seems that you are correct.  The motherboard can only use memory as PC3 8500.

  
  

• HP officejet Pro 8500 909: HP Officejet Pro 8500 909 has not scan after downloading Windows 10

  About 6 weeks ago, I downloaded Windows 10.  Today, I tried to analyze something and received the message "no Scan Options".  So I tried to go to the Hp Solution Center and who do not respond. When I was on Windows 7, I have had no problem scanning or with the HP Solution Center.

  Hello

  You will probably need to reinstall the HP software after an upgrade of the operating system.

  Please follow the steps for exactly the problem and check for the difference:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8500-all-in-one-printer-series---A9/3752454/model/3752455/document/c04714314/

  Section ' can not analyze after upgrade to Windows 10 "should apply, or the"HP solutions Center can not run"or 'Scan is busy or in use' error with a connected printer"if it's the exact specified error when you try to open the HP solution... Center.

  If you need to uninstall the HP software, uninstall it by running the following remove utility Uninstall_L4:

  http://ftp.HP.com/pub/softlib/software12/COL31044/MP-77037-4/OJP8500vA909_Scrubber_13.exe

  Kind regards

  Shlomi

• Officejet Pro 8500 analysis has on Yosemite

  I can't get my Officejet Pro 8500 Premium 910N a scanner on my MacBook Pro (Yosemite 10.10.2). It keeps telling me "software for this device is not installed. Scanner/printer does not recognize my MacBook in the network. My MacBook recognizes an Officejet in the network. I can print from my MacBook to the printer, so there is no communication between the two, it just won't scan.

  I have:

  Check updates (update Apple) no update available.

  Reset printers

  Done a permission repair disc

  Several reboots

  Uninstalled and reinstalled MacKeeper MacKeeper

  Put new cartridges in the printer (HP-brand)

  I'm seriously running out of options. Help?

  Hello

  The Apple icon click on about this Mac, and then click software update.

  Click the Store the start menu and then reload this Page to get the latest drivers are available.

  If no HP update is available, install it and try to scan the image.

  If there is no update available, install follows him, and then try scanning of Image Capture or preview:

  https://support.Apple.com/kb/DL907?locale=en_US

  Please let me know if this is useful,

  Shlomi

• HP Officejet Pro 8500 best has come out very low but the printer works fine.

  I was always able to make great copies.  The quality of the document that I copy is excellent and I've copied before.  Now everything I copy is very low and cannot be read.  The printer works without any problem.

  Hey 1265yankee,

  I see that you have a problem of quality of the copy with your Officejet Pro 8500 (A910) a model-all-in-one.  Have you tried to reset the printer hard and ensured that the device is connected to a wall outlet directly?

  • Unplug the printer while on
  • Unplug the other end of the power cord from the wall jack directly
  • Wait 30 to 60 seconds
  • Plug the unit back to

  Also, take a look at the steps in the document found here.  The document is not directly applicable in the present case, but the steps are the same for your question.

  Let me know how it goes.  If this does not solve your problem, then I have the steps to perform a factory reset on this product to see if an internal reset will be able to get the device to work as expected.

• Officejet Pro 8500 problem has scan (new)

  Mac 10.5.8 (Leopard, Snow Leopard no)

  I can't find any interface or driver for scanning, except the screen on the printer.

  Use of the screen, I have the choice of jpg and pdf (also by e-mail, but who do not need).

  Jpg: Gives Me a 200 dpi file that is only a part of 6 "x 4" of the page.

  PDF: Give me the whole page and I can "save under" a tiff file or anything else since Acrobat up to 1200 dpi, but the resolution is certainly not the 4800dpi promised in the specification of this machine. And there is no mention of the color depth.

  Where is the driver!

  I have never had a scanner that didn't come with a driver that could be imported into PhotoShop, offering an interface for different resolutions and cropping.

  Should I remove this printer?

  If so, is there an all-in-one that will scan photos properly?

  By the way, I was on the chat for a long time yesterday, because the yellow cartridge sunk and emptied at the time the implementation has been full. Cat person told me to call phone support today, but one of the service centres is down and the tree of phone hangs up on me.

  This is a very disappointing experience!

  Hello!

  Is that what you have already installed the printer software in your computer?

  If this isn't the case, run the disc that came with the printer and you will see the user interface for scanning.

  For more information, click on the link below.  It is precisely for your printer and the issue.  Good luck!

  http://support.HP.com/us-en/document/c02456650

  -claire

• print only in black and yellow on the officejet pro 8500 Inc. has

  Hello

  I installed recentlly hed all 4 cartiges for my printer.

  all cartiges 940XL ginuine.

  It is not the first time installation and never problams hed.

  now I tried to cleen the printhead in the menu priter and allaigen printheads.

  allaigen faild and still only print in black and yellow...

  

  Help me please...  (Sorry for my bad English).

  Your printer has 4 color cartridges and 2 heads print, black share one and the other for the other two colors.
  If cleaning print head does not help, probably time to replace the print head: http://support.hp.com/us-en/document/c01623635

• My printer is listed, but the hp software can't find my printer... Hp jet pro 8500 desktop has... iPad

  All other applications on my iPad can find my printer on the network. The application of scanning hp ipad print cannot.

  The PDF explaining compatible printers for hp printer control app includes the 8500 a, which is confusing. The House eprint & biz will scan the glass, not the adf, which can be useful. Thank you.