HP C309a: Problem w C309a printer

Similar Questions

• On HP C309a printer wireless test page is printing ok

  On HP C309a printer wireless test page is printing ok, all the other tried printing out a blank page, I have updated files all the drivers and software for this printer - no success

  No problem ink, more with 2 computers on my network printing is very good

  So far, no error found runs the network check...

  Please, any advice

  Thank you

  Hello

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Question printer prints white sheets of paper
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&LC=en&DLC=en&product=3737195&tmp_track_link=ot_search#N47

• Photosmart Premium C309a print only the first column of the Excel worksheet

  Photosmart Premium C309a print only the first column of the Excel worksheet

  Hello

  I see you are having a problem printing to an Excel document.

  I suggest you install a default substitution such as the jet pilot desktop 990 c driver.

  You can follow this thread of Shane, who will show you how.

  After that, you can try printing again from Excel.

• Trouble installing software Cener Solution for C309a printer all in one

  I've had my C309a printer for a few years now and it has worked well.  My old computer died and I had to get a new one.  I have problems to get the installed Solution Center software.  I am running Windows 7 64 bit.  I downloaded the latest software from the hp Web site.  I followed all the steps as instructed.  The printer is recognized and I can print from Word.  I can't get the solution center to load.  When I run the installation of the software on the HP website (PS_AIO_05_C309a_Net_Full_Win_enu_140_047) it goes through all the steps, but hangs at the end, then a "fatal error-wStub 459426" appears.  An error log is produced, followed by a placed file on my desktop named "HP Installation error - Windows 7".  I followed all the steps up to the wired installation step 2 D.  That is to turn off anti-virus firewall and anti and software programs.  Same error message with a different number after '-wStub ' fatal error message.  I'm at my wits end here.  Installation install photosmart essentials 3.5, but not the Solution Center software.  I need this to scan my documents!  When I try to scan from the console printer, I get an error message on the printer cannot connect to the computer screen saying.

  I have downloaded and run diagnostic printer HP program tools, print and scan the doctor, who tells me that I need the Solution Center software installed.  I don't type what I said to a diagnostic conclusion.  I followed the steps in this program without success either.

  I'm completely puzzled here. Can someone help me?

  Do not hesitate to send an email directly: [personal information deleted]

  Jeff

  Yes, I would recommend going through the uninstall of the printer of all these places, we went in front. Clean every time we go a little deeper and making one further.

• I can't uninstall programs Hewlett Packard C309a printer with Uninstall button. How can I do this please?

  I use Windows Vista. I installed and until recently used a Hewlett Packard C309a printer. I can't uninstall the programs supplied with the CD.

  I tried the usual method, now for the unusual please. When you push on uninstall/change, the small circle appears briefly, and then disappears. Harold H_874.

  Hello

  HP has sometimes problems with uninstalling.

  I suggest that you ask in the Support Forum of HP printer help to uninstall their software.

  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  See you soon.

• Full compatibility with Win 8.1 C309a printer?

  I have no problem to install the drivers c309a using a Win 8.1 operating system that has all the undates installed, so I can print, however the software suite to operate other functions will not be installed.  When you use the latest version of the software of HP to win 8.1, it downloads and unzips but nothing after decompresses happen.  The Task Manager shows the configuration of the Installer (32-bit) HP running.  I left the Installer run for over an hour with no progress.  I repeated this process several times without success.

  I contacted HP and they told me the c309a printer is not totally compatibility with Win 8.1 in what all functions like the fax and scanning will not work.

  Also, I can see the printer installed from its address of sea.

  Is this correct?  Dose someone out there know the real story?

  Hello

  The HP Photosmart C309 is fully supported by Windows 8.1.

  Try following the steps below, and then reinstall the HP software and check any changes:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the Installer below and check differences:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109738-1&cc=us&DLC=en&LC=en&OS=4158&product=3737195&sw_lang=

  Please let me know if this is useful,
  Shlomi

• C309a printer driver fails to install, the drive M: on Windows XP

  C309a printer driver tries to install my drive M: on Windows XP.  Automatic installation of HP fails because the M: drive is not valid.  What should I do?

  Hello ChappyD

  If the problem is not with the printer but the computer that you got with the Agency. It seems that he may have had only a M:\ drive on the computer before and default installation of this drive that is obviously not valid, windows tries more based on the list of drives you provided previously.

  At this point, the best solution would be to re - install Windows on the computer.

  However, before you reinstall Windows try the following:

  1. Open the command prompt
  2. type: 'subst M: C:\. "without the quotes and press to enter.
  3. Restart and try to reinstall again.

  SOURCE: Officejet Pro 8500 wireless Error Message Invalid drive F: /

• My HP Photosmart C309a printer can't find the router wireless 3 feet above him.

  My HP Photosmart C309a printer can't find the router wireless 3 feet above him.  I ran the diagnostics and got the message "the wireless radio does not work.  This device is the wireless radio?  In the router? In the printer?  I have reset the router is #6 with the printer, but I am still unable to connect my Macbook to the printer wirelessly.  My desktop Mac is connected to the printer with a cable and print well.  Is my router messed or my printer?

  Wireless radio of your printer (that it uses to communicate with the router radio) died.  Here's how to contact HP technical support: www.hp.com/go/totalcare

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP

  I JUST BOUGHT A HP OFFICEJET 6700 (LESS THAN 1 WEEK), THE PROBLEM OF PRINTER OR INK SYSTEM MESSAGE, TURN PRINTER OFF THEN WE IF THE PROBLEM CONTINUES CONTACT HP. IS DISPLAYED ON THE PRINTER SCREEN. I DID EVERYTHING SUGGESTED, AND MORE MORE, BUT THIS CUSTOM MESSAGE CLEARLY.  ALL DIAGNOSES OF THE PRINTER THE PRINTER IS FINE.  THE OPERATING SYSTEM IS WINDOWS 7.

  Mahamoud,
  Your article made a walkthrough basic troubleshooting, ending with the question if the print head is repairable. Because it is not on the 6700, the article isn't really the problem.
  
  Here is the solution I found to this problem:
  I discovered that eliminating all ink cartridges allows the printer at startup (although there is a message saying the missing print cartridges).
  Putting the cartridges in a binary regression revealed that the ink has been bad. (In my case, I only got the message of failure/printer ink when the yellow cartridge was in the printer).
  Replacement of the restored cartridge the printer functionality.
  That's the good news.
  Now the bad news: for HP.
  The generic error message indicates a failure with the printer or the ink system. No differentiation. With the electronics in the cartridges (that the client pays a high price for), looks that HP could not understand how to indicate a cartridge problem. This error message is not only unnecessary, but misleading. The printer indicates only a power reset and then contact HP. There is no indication that he might be a cartridge problem, not to mention what cartridge has failed. By the way, my customer encountered this problem when you replace the color cartridges. The cartridge failed was a new replacement.
  All of the web enabled features, fax, scanning features, print included with this printer are not very useful if the user can't get the dang thing to print.
  Another problem with this printer, is that, even when you only print in b & W, the printer uses little color (ostensibly make Blacks more "BOLD"). Then, finally, a color cartridge will go low or empty, even if only B & W printing. And guess what, you can't continue to print n & B if one of the color cartridges are out of ink. Thus, HP... How is this useful printer in an office environment, where most print tends to be B & W?

  (I would add; the solution in the message of failure/printer ink cartridge cannot fix your problem if, in fact, there are a few default printer. But if the problem is in the ink system, then the troubleshooting cartridge can help you).
  I have posted similar comments on Amazon, for this printer, in the subject line: shame on you, HP.

• 7640 ENVY: ENVY error 7640 "There is a problem with this printer"

  Hi guys. I had this printer 4 months ago and it worked as wonderful. But this weekend when I turned it on the error "There is a problem with this printer" appeared right after it connected to my wireless network.

  I did several tests and the error comes only if the network is connected to the internet.

  When it is not connected to the internet fine print (prints, scans, all via wifi) jobs.

  I have a MAC and airport Time Capsule.

  Is there a set any that solved the problem?

  Now it's working. The problem was Auto IP. Set it to manual and it started working.

  Thanks in any case.

  Concerning

• HP Officejet 5740: there is a problem with the printer

  Every day the printer (not standby) turns on and shows "there is a problem with the printer. Turn the printer off, then on. "why what is happening every day?

  This problem got solved, later. Although tech hp sent me the ink HPInstant and that they "reset" of my printer, the error message returned in a few days and continues every day. Another call to Tech Support/InstantInk advised me to return the printer for an Exchange (it's 60 miles a way back). We decided to install Instant ink cartridges, as a last resort to resolve the error messages, and it worked. No error message. I put the original ink cartridges in the printer I can use those to the top. Still no error message and this printer now works well. PERSONAL OPINION: When we enrolled in instantink, hp tried to contact our printer via wireless (whatever) and when it failed an error occurred every DAY, after the installation of the instant ink cartridges a connection has been established at hpinstantink have finished the registration process.

• Solution Center said problem as the printer is disabled

  Since the upgrade to 8.1 Windows solution Center says that my printer is disabled. This isn't the case, that my printer is enabled and works well. I deleted and reinstalled the printer drivers and also Center solutions lenovo, but he always tells me that I have a problem with the printer is disabled. Device Manager tells me he is correctly installed and activated. How can I get this message from the solution center off?

  Thanks for your reply Peter. I did as you suggested and off the notification, regards Steve

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.