HP Color Laserjet M476nw MFP: Printer unavailable

Similar Questions

• HP Color LaserJet M476nw MFP: Scanner reported an error - HP Color LaserJet M476nw MFP

  I had problems with the HP scanning software.  When I run the software and try to initialize a scan, I get the message

  =====

  Scan reported an error

  HP Color LaserJet M476nw MFP is currently unavailable. Please check if it is connected and turned on, or try again later.

  =====

  In fact, the scanner works fine, like I can scan documents directly to the USB port on the printer.  The scanner has worked in the past with the HP software on my computer, but now just won't work.  The printer is also properly connected to the computer as I have no problem with printing of documents.

  No idea how to fix this?

  Thank you!

  Hello

  Try to install the following package to make sure that your drivers are perfectly up-to-date:

  https://support.Apple.com/kb/DL907?locale=en_US

  Then restart your Mac and try to scan the image.

  If the same persisnts open the JSCA-Packard folder and move the HP scanning application to the trash.

  Then install the HP Easy Scan app instead (which is the latest version of HP scanning):

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now try scanning using the application and check for the difference.

  Please let me know the results,

  Shlomi

• HP Color Laserjet M476nw MFP: My HP Color LaserJet M476nw MFP

  My HP Color Laserjet M476nw MFP made a crowing noise when printing envelopes.  Require lubrication?

  If you use non HP / recycled / fill the ink cartridges, then the first step that I would say is to replace these cartridges a genuine HP toner cartridges.

  If not the toner cartridge, then it would be one of the components of hardware printer that is at issue, where a Tech HP may need to perform a physical inspection of the aircraft and the error condition.

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• Without HP color laserjet M277dw MFP print margins

  Is it possible to print without margins with this printer? I need top print brochures and can not find the setting to make this possible.

  Thank you

  EKHC

  @EKHC

  EKHC wrote:

  Ah yes, I just read this in the owner's manual. Do you know if it is possible to download a driver that could change the status of permissioin to allow edge to edge printing?

  I used to think it was possible (another print driver) - I've learned since the ability to print without margins is related to the physical hardware: the printer can print without borders - or he can do.

  Assuming for the moment that there is a way "around the restriction, you can try Photo Creations (works for Windows and Mac).»  If the software can find a way to provide the service, it will do.

  Of RocketLife

  www.hp.com/go/hppc.

  Projects quick prints - you can download the software from here too:

  https://scripts.rocketlifeproduction.com/go/catalog.php/HP?category=prints_learnmore%23quickprints

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Color LaserJet M476nw MFP: upgrade to Mac OS Sierra, version 10.12, now impossible to save scanned copies

  After scanning a document, the registration option is grayed out.

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• Scanning for HP Color LaserJet M476nw MFP

  I just installed the software for the MFP476nw. When I scan a page 8.5 by 11, it scans it on a larger size which must be grown before the Save as pdf. This creates a lot of work for a large document when you need to crop each page before saving. What is the best way to scan the page 8.5 by 11 to the same size of paper to PDF using the MFP475nw?

  Of course, on Mac, you can use the HP scanning software, located under Applications > Hewlett-Packard.

  Once by clicking new scan you need to click on the button to view the details and change the scan to letter size.

  Altervative another is to scan using the tools of OS like Apple Preview, Capture of Image or screen breeders & Scanners.

  Remember undeck the option custom size in the scan settings, and then select the LETTER size.

  You can find detailed instructions for those in the fofllowing link:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5245583&docid=emr_na-c03415763&docLocale=en_US#N100F0

  Shlomi

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n CONNECTED to THE NETWORK, SHOWS NO INTERNET CONNECTION

  HP Color LaserJet M277n MFP printer, is connected to the network and I am able to print and scan. During the attempt to get the HP Web Enable services in the Web services configuration page, it displays an error: "connection error, check the internet connection".

  After you enter the IP address of the printer in the browser, I am able to detect the printer. To enable printing of HP, but unable to do so finds out the above error. Tried a lot of things including re editing of. When I check the printer, it shows the proxy settings are required / incorrect, where, as confirmed by the supplier that they use the proxy server.

  Help, please.

  Hello @JljoThomas!

  Thanks for posting and welcome to the Forums of HP!

  I understand that you have a problem of activation of the functionality of web services on your MFP HP LaserJet Pro M277n. I'd love to help you with this.

  First of all, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Issues when connected to an uninterruptible power supply/Strip/surge protector power
  In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
  ↑ This is not limited to the Laserjet printers.

  If this does not resolve the issue, we are going to let the router and unplug the power cable (NOTE: do not reset the router...), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If you are still unable to connect to web services after trying these steps, we can try to set a manual DNS server of your printer to connect to.

  On the front panel of the printer, press the wireless icon. Select it wireless TO get the wireless summary. Do not your IP address.

  1. on your computer, open a Web browser and enter the IP address of the printer in the address bar. This will bring up the embedded Web server (EWS) page.

  2. at the top of the page, select Networking.

  3. in the left side, select Identification network.

  4. in article for DNS, under primary (IPv4) enter 8.8.8.8, under secondary (IPv4) enter 8.8.4.4.

  5. Select Apply at the bottom of the screen.

  6. try to activate the web services again.

  If it is still unable to connect, try to enter 209.244.0.3 for the primary (IPv4) and 209.244.0.4 for secondary (IPv4)

  Hope this helps!

  

• where can I find the drivers for my hp laserjet cm2320 mfp printer

  I couldn't find a driver for hp color laserjet cm2320 mfp printer. My system is win 7.

  I couldn't find a driver for hp color laserjet cm2320 mfp printer. My system is win 7.

  -You know what you have for hardware: HP Color LaserJet CM2320 MFP

  So... what say you HP?

  Hardware support - including the drivers and other software that allow the device to interface with other software and hardware - is the manufacturer of the hardware device.

  This printer has been essentially abandoned in newer operating systems HP all in time, it seems...
  http://h30434.www3.HP.com/T5/printer-all-in-one-software/CM2320-MFP-has-been-abandoned/TD-p/218486

  Although it should 'work '...

  You can get the drivers and software, you can HP.  Select your specific printer if...

  • HP Color LaserJet CM2320fxi multifunction printer
  • HP Color LaserJet CM2320n MFP
  • HP Color LaserJet CM2320nf multifunction printer

• HP Color Laserjet M277dw MFP: Cannot scan HP Color Laserjet MFP M277dw on Mac OS 10.6

  Hello, I can not scan to network drive using the above mentioned printer. Scan to USB key is possible.

  I downloaded the update (version 20160331) firmware image, but impossible to install the program. After double click, nothing happens. Any ideas?

  Thank you and best regards

  Christoph

  Hi Christoph,

  The printer is not compatible with Snow Leopard, it is supported on Lion (10.7) or later versions.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-Pro-MFP-M277-series/7089945/model/7089949/document/c04515051/

  The update of the firmware utilitywas not desinged for your operating system and therefore does not work on it.

  As the connectewd printer to a network, follow these steps to update firmware directly from the menu of the printer:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04517106/

  If the implementation of scan to a shared folder on your grave down Mac, please specify the exact error, and the parameters used (path of the shared folder used, etc.) also well done you have shared this folder your Mac form?

• HP Color LaserJet M277dw MFP: I forgot password and admin user name

  I have a HP Color LaserJet M277dw MFP and I forgot the username admin and the password.  They were the two changed wwhen the printer was purchased. Is it possible to reset back to factory default admin/admin?

  Go to this web link, the instructions are there.

  http://ow.LY/Bbpy305fOQk

  rbogdan

• Color LaserJet CM6040 MFP: A3 manual duplex Duplex on Color LaserJet CM6040 MFP taken in charge?

  Hello

  I hope someone can help to answer this question. I am trying to print a newspaper on the double-sided A3, but I get no prompt to reinsert the paper to print on the other side, as I do when I print A4.

  The parameters have been triple checked and still the A3 prints out sequentialy on one side.

  My question is the Color LaserJet CM6040 MFP support manual duplex Duplex A3?

  Thanks in advance

  JEAN

  The CM 6030 / 6040 CM User Guide manual States:

  «Duplex printing: provides printing automatic duplex (print on both sides of paper).» The range of paper size for automatic duplex printing is 175 to 320 mm (6.9 to 12.6 in.) x 210 to 457 mm (8.3 "to 18"). Media weight range is from 60 to 220 g/m2 (16 to 58 lbs.)"

  If you use manual duplex because the printer driver does not offer the automatic duplex option, it may be that the driver does not know that a duplex unit is equipped.

  The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

• HP Color LaserJet CM1015 MFP: LaserJet CM1015 scanner does not work in Windows 10 (64-bit)

  I up graded to Windows (64-bit) 10 now the scanner on my HP Color LaserJet CM1015 MFP does not. I installed HP Universal print drivers, but apparently there is no include scanner drivers. Anyone know where I can get the drivers scanner?

  Thank you

  N ° 7

  Hi Lou,

  Basic scanning drivers built into the operating system only allow scan however a USB key.

  You can follow these steps to install the previous HP software by using compatibility mode:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03506225

  Vista drivers can be obtained directly from the following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1846081&swItemId=ly_51851_1&swEnvOid=2100

• HP Color LaserJet M277dw MFP: HP Color LaserJet M277dw MFP - may not wake from sleep

  Hello

  This has been put to death elsewhere, but I have not found a solution that works.

  I'm close to return this product, but thought I'd have one last try here.

  I have a brand new HP Color LaserJet M277dw MFP. It works very well. Apart from one thing, when the printer goes into sleep mode, I can't he wakes again and accept print jobs. Sometimes go to the printer by pressing the touch screen and turning market working again, but if I just send a print job if it is 'sleep' mode, it prints ever.

  Printer is connected via wifi only, no other method of connection.

  Printer is assigned a static IP address 192.168.1.105

  DHCP is disabled in the printer

  IPv6 is disabled in the printer.

  IP address of the router is 192.168.1.1

  DHCP is enabled in the router with a starting address of the 192.168.1.150 and an address to 192.168.1.199

  DNS primary and secondary 8.8.8.8. and 8.8.4.4 assigned in the printer.

  I've updated the firmware inside the printer to the most recent version, as well as pilots of Windows 10.

  I tried to reset everything and turning everything (including the printer itself, the router and all other PCs, laptops, tablets, phones etc...) and the new, but no joy.

  Can anyone help please?

  Thanks and greetings

  Nick

  I ran the HP print and scan doctor software, and this update the firmware datecode 20160606 printers.

  So far, that * seems * fixed the awakening of sleep problem. Fingers crossed!

  Detective Conan.

  Thank you

  Nick