HP Compaq dc7700_PCI drivers_Unknown of a device

Similar Questions

• HP Compaq 6910 p: 6910p "this device cannot find enough free resources that it can use. (Code 12) »

  Under hardware and Sound/devices and printers, I have a yellow triangle with my 6910p icon.  Right click on the "hardware" tab States "this device cannot find enough free resources that it can use. (Code 12).

  I've recently upgraded the operating system to Windows 7 Professional.  Everything works ok but I show this yellow triangle where the devices are displayed.  When I look in Device Manager/Mobile Intel (r) 965, I get a window saying 'Problem detected with Mobile Intel (r) 965 Express Chipset Family'.   The next window States: "the device cannot find enough free resources that it can use. (Code 12).  If you want to use this device, you have to disable other devices on the system once".

  How can I go about doing so, the yellow triangle disappears?

  I tried to reinstall device Base system SP46972 and SP45738 of the video driver.

  Not sure if this is related, but I also have a black screen with a 1 in. border on the left and the right, which was not the case when Windows XP is the operating system.  I also need to solve this problem as well.  Searches on Google did not find the solution, so I hope someone can provide the answers to these two questions.

  

  Glad to hear that you would have recommended as the next step.  It has proved to be a challenge, but one that we have managed to find solutions for.    Thanks again for all your help and patients.     Carl

• Upgrade to a larger disk - compaq presario FR429AA

  I have a compaq presario FR429AA and the Device Manager in Windows 7 tellsme, I have a WDC WD32 00AAJS-65B4A SCSI Disk Device as my hard drive is internal. It comes to 320Gig, but I want to put in an internal 2 drive 3 TB to run as the main drive with the operating system and keep the old drive as additional storage space.

  I've heard of IDE, peripheral PATA and SATA, but sure of SCSI I'mnot main hard drive of the PC.  I can simply go with a SATA drive? Or I don't specifically tolook for a SCSI for this PC?

  Thank you

  The 2 TiB limit is due to the OS.  However, it is for a single player.  You can install several readers until, I think, 256 TiB on the system.  Using the old drive will create no problem.

  I suggest to do a system recovery using recovery discs.  This will save possible problems that may occur.  Here's a guide to help you.  Also, here is a guide to help you upgrade from Vista to Windows 7.

  I've never used Acronis Backup.  Therefore, I am not sure if your suggestion will not work correctly.  HP motherboards are tattooed with the major components of the computer.  If the motherboard doesn't detect these components, it won't an installation by using the recovery discs.

• audio device question

  No sound on my computer. already check the speakers on another computer and is ok. I try to read a cd, but not sound. He saids under sound and devices [no audio. how I can solve this problem.] Thank you.

  Do you see the volume control in the taskbar (lower-right)?

  Run the System File Checker

  Start > type CMD

  Right click on CMD > select run as administrator

  Type sfc/scannow

  Press enter

  The scan takes a few minutes

  Use the System File Checker tool to repair missing or corrupted system files

  https://support.Microsoft.com/en-us/KB/929833

  When you are finished, go to the Windows Manager and look for C:\windows\lastgood in the folder.  Open the C:\windows\lastgood folder and look for System 32.

  Open the System 32 folder and look for the dll cache.

  Open the dll cache > Search sndvol32

  Copy/paste sndvol32 to C:\windows\system32

  In Control Panel > sounds, speech, and audio devices > sounds and audio devices > check the box to place volume icon in the taskbar

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  https://support.Microsoft.com/en-us/KB/319095

  If this isn't the problem, run the fixit in the following Microsoft FixIt.

  Diagnose and automatically repair audio playback problems:

  http://support.Microsoft.com/mats/AudioPlayback/

  HP and Compaq Desktop PCs - no Audio devices (Windows XP)

  http://support.HP.com/us-en/document/c01427349

• Network Controller is not found"error message appears in the DEVICE MANAGER

  Hello! I installed WIN 7 Prof 64 bit on my laptop Compaq Presario CQ62-410US and Device Manager shows that the ETHERNET CONTROLLER is not installed correctly. I've been using the appropriate drivers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5048...

  I tried to find a solution here:

  http://support.HP.com/us-en/document/c02592699

  "But the" 'LAN Power Saving ' option of "System Configuration ' component is missing.

  I uninstalled installed new driver LAN wireless with no result.

  Thank you very much for your help! Miron

  Hello:

  See if it works... Now, it's to install the Ethernet controller (wired), not the wireless network controller.

  Make sure that you have installed the first Intel chipset driver, then restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-87204-1&cc=us&DLC=en&LC=en&OS=4063&product=5048735&sw_lang=

  Then install the ethernet driver second on the list at the link below:

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• I just installed a 2nd ATA drive, now the computer (SR2150NX) does not recognize the CD drive.

  Computer Compaq SR2150NX Vista Home. Device Manager does not display the CD/DVD drive after installing a hard drive from second on the tablecloth that is also connected to the CD player. The new drive is seen fine. If I pull the power of the new drive and restart, the drive is visible again. The disc was a secondary drive in another computer, so it is set to be a slave. How can I get both work?

  It is perhaps as simple as changing the jumper on CS (Cable Select).

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• Compaq 6910p ACPI driver missing on Device Manager

  I have a compaq laptop 6910p with drivers missing ACPI on Device Manager. I tried to get a download link for Hp to solve the problem BUT nothing helped. I am using windows Xp Pro SP3

  Any person having a relationship? I'd appreciate it.

  Thank you

  Hello:

  Here is the link for the driver you need.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3357377 & prodNameId = 3357378 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-48325-1

  Paul

• Unknown device - ACPI\HPQ0006\2 & DABA3FF & 0 on Compaq 8510p

  Because of a rootkit I had to reinstall Windows XP Pro on a laptop HP Compaq 8510 and now I have an unknown device in Device Manager.
  It's a device instance ID and it is ACPI\HPQ0006\2 & DABA3FF & 0. (it is certainly NOT the TPM :-)
  The driver may not even be located on the driver and application recovery DVD.
  Download driver to resolve this issue, do you have ideas? Any suggestion would be appreciated. Thank you.

  Hello

  Download and install the driver for buttons to quick launch on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

  Once the installation is complete, restart the computer and check if this solves the problem.

  Kind regards

  DP - K

• HP compaq dc7700 minitowers: Microcode error: no evolutionary device drivers/no pass

  I upgraded my HP compaq dc7700 Intel e6400 CPU (2.13 ghz, 1066 MHz front side bus) to the intel e6700 (3.2 ghz, 1066 MHz front side bus) and did a clean install of Windows 10 pro at first boot. I noticed that it gave an error, namely 1801: firmware does not support this CPU or something. I pressed f1 to continue installing Windows, my plan was to install the firmware update later. After Windows has started, I created a bootable USB to install the firmware of the HP drivers and software section. But when I tried to install the firmware update, it didn't work! I just typed in flashbin.exe, as shown in various posts on this forum. It gave this error: "error!" There is no valid drivers on media or three are no evolutionary device in this system. »
  So I tried som other options at the start of the installation, three was something like: f8 to activate the increased processor, which basically is what I needed. But when trying to install flashbin.exe, he gave the same exact error, although I didn't have any options before I could type. See all: https://www.dropbox.com/s/q4eo8qqp49gohc9/IMG_20160227_153036.jpg?dl=0 (without pressing f8)
  
  https://www.dropbox.com/s/xw60pryzq30ta4q/IMG_20160227_155457.jpg?DL=0 (with pressing f8, I selected Yes everywhere)
  
  Do I need additional drivers? GPU, mouse, headset, everything worked without having to download anything extra!

  If you were able to get to a command prompt and had copied the contents of the firmware flash folder on the drive back, so you could get to a command prompt and run flashbin.exe, then it shouldn't matter.

  I helped that another Member of the forum for 3 days to finally get her to work on his dc5700 E7200 (uses the same firmware as the 7700 update).

  Here is the discussion.  The firmware update worked after he reinstalled the original processor.

  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/1801-microcode-error/TD-p/5511686

  I don't know if this procedure works on the Wolfdale E6700.

  It does for all the Wolfdale E7200-E7600.

  No one has ever posted this problem with the Wolfdale E6700, then you are the first I know to try to pass by this.

• Compaq Presario V6120US: Wireless network CARD not FIGURENT DO NOT IN the DEVICES MANAGER

  I have a compaq presario v6120us I can't get WiFi to work on. I tried to switch off wi - fi on and outside, I was going to try to go into the bios and put it on there, but there is no control for wi - fi in bios. When I try to find it in Device Manager, I see not listed. But I know there's a wi - fi connection because there the card inside, more there's a switch on to activate the wi fi. I consider me be advanced when it comes to computer repair, but I'm running out of ideas, and I would be very happy for any help, thoughts, or ideas as to what this might be.

  Thank you very sincerely,.

  Dennis

  Hi, Dennis:

  The motherboard in your model had issues due to run hot.

  One of the victims is that the power of the slot that plugs into the wireless card is lost.

  That's why the wireless card dropped out of sight.

  It probably is about your present dilemma.

  That's happened a lot with the dv6000/dv9000 motherboards that used the same chipset nvidia and AMD processor has your laptop.

• Compaq presario v 3780TU: Base System Device Driver missing

  product compaq presario v 3780TU

  problem - the two driver missing basic systems, audio device does not not only integrated speakers work not, works of headphones

  problem when I upgraded to the Windows OS 10

  first base h/w device id is

  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  ID of second base system device h/w

  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  driver audio h/w id is

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CD & REV_1000
  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CD

  Please help solve

  Hello:

  For basic system devices, you need this driver...

  This package contains the driver and the host controller Ricoh 5-in-1 card reader for laptops models and operating systems.

  File name: sp37614.exe

  For the other device you need this driver...

  This package contains the driver for the Conexant HDAUDIO Soft Data Fax Modem with SmartCP (CX20548) in the notebook models and operating systems. This driver enables the remote access feature and provides a UI for formodem.

  File name: sp37817.exe

• PC HP Compaq 8200 Elite MT: KERNEL_SECURITY_CHECK_FAILURE: a rider needs to install the Device Manager

  PC HP Compaq 8200 Elite MT

  Product #: XY139EA #AB7

  KERNEL_SECURITY_CHECK_FAILURE I got 7 times that screen and necessary stop PC lose my job...

  in detail, I got: / / restarts not necessary reboot manually - it's 7 times different, what to do... I clean some viruses and update PC 1st and 2nd hour, but's still 3 times.

  The PC has encountered a problem and needs to restart.
  We are only collecting some information in error, then we ' he's restarted for you. ( ! 00 %).
  KERNEL_SECURITY_CHECK_FAILURE

  In the device manager driver must also install... what to do? what the cause of the problem...?

  A default OS Win 7 Pro 64-bit--> improved new facility at--> Win 8.1 Pro 64-bit

  

  Hello:

  I can't help you with the error, but here is the link for the driver for PCI serial port, you must...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037951&swItemId=vc_138955_1&swEnvOid=4059

  I have also a 8200 Elite CMT and it works W8.1 Pro x 64 and even the new W10 preview with no problems whatsoever.

• Cq58 Compaq: Compaq CQ58 - device to boot not found

  Compaq CQ58

  Hello

  When you turn on I get

  Not found boot device

  Please install the operating system on your hard drive.

  Hard drive (3f0)

  f2...........................

  visit hp.com...

  And nothing else

  Then I do the "F2" as follows:

  UEFI V 1.6.0.0 - BIOS

  visit...

  ... Past the memory test
  ... Past HD disk check

  I go to f10

  > F9 message load setup defaults > Yes > f10 save and exit > Yes

  No improvement even if there is a life in there cos the disc or the fan turns

  I think the next step is to redo any os USB

  Cannot find links suggested to reboot on HP site - they go absolutely nowhere, unnecessary.

  This is my son's laptop computer

  It loaded windows 10

  a windows 8

  do not know what he was doing, but he said it worked on 10 for a while.

  Why microsoft allow minors to mess up so bad? In any case...

  I don't know if he'll want to restore as windows8 or 10

  I don't know if it's 32-bit or 64-bit in any case

  Who tells us of the f10...

  third line up always suggest windows 8?

  Here is the capture of the f10 camera

  

  All ideas

  No tellings off the power. No closing the stable door once the horse has bolted.

  Means and just before useful suggestions please.

  Thank you very much.

  Concerning

  Wilf's dad

  Hello

  No matter if update 8 - also long as 10 Windows activated successfully, you can use the "clean installation" method

  It is possible that if the machine had just been "updated", the hard stop interrupted files system updated and this can lead to this kind of question.

  As a general rule, a clean installation of Windows 10 has less problems problems/performance than the upgrade from a previous version of Windows.

  Kind regards

  DP - K

• Compaq Nc 6000: Device not complete Code 28

  Dear Mr. Paul,

  I have a problem with pc portable compaq nc 6000. I had upgraded to windows 7 32 bit on the old XP Professional. Everything worked well. Then I reinstalled, ex novo: windows 7 32-bit, but now I have the problem.

  It says 2 BUS PCI Device 6 function 2 (not completed device Code 28). How to solve it?

  Thank you.

  [Personal information]

  (Italy)

  Hello.

  That's the good news that you have to work on Windows 7.