HP connection manager fatal error 80080005 8 windows on my HP Pavilion dv7-6b50ea

Similar Questions

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• Unable to connect to HP Connection Manager. Error 8008005

  I have a HP Pavilion dv6 Notebook PC and get an error "could not connect to HP Connection Manager. Error 80080005 "I tried in vain to resolve through messages. Any ideas?

  I just bought a HP dv7t Quad laptop and have the same problem.

• Installation of Windows XP on the Pavilion dv7-6195us

  Hi guys.

  Well, I am trying to install Windows XP Professional on my laptop, HP Pavilion dv7-6195us.

  THA laptop came with Windows 7 Home Premium pre-installed.

  I want to create the dual-boot with XP and 7. The problem is that I get the blue screen after pressing any key to boot from the DVD.

  Does anyone know how to install Windows XP on laptop Pavilion dv7?

  The link with you help solve this problem:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

• Remote Access Auto Connection Manager and error with a VPN work

  I use my laptop to connect to my VPN working. It has not worked since June 24, 2010. I get a message indicating that the connection to network access device is not found. I also have a problem with the connection manager automatic remote access. I'm trying to launch and get an error code 5, unauthorized. The Auto Connection Manager remote access has something to do with the vpn access problem and if so how can I solve this problem?

  Hello hitherandthee,

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads?page=10

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart C4400 Fatal Error download drive, Windows Vista

  Operating system: Windows Vista 32-bit

  Printer: Photosmart C4400 (I have had no other printer software on my computer)

  Problem: I can not download the driver (from the included CD) on my computer.

  Step 3/4, 94%, I get a fatal error Message:

  MSI. Scan

  Microsoft.vego.STL, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9alel8e3b" version = "8.0sc727.91", type = "win32".

  Error situation coade 20218093

  What I tried: disable the firewall, by downloading the reader from HP site, try the message error MSI listed on the HP site. All to nothing does not.

  What should I do to correctly download the driver? BTW: The printer works when I use a memory card.

  Thanks for all the solutions!

  try to download the latest version of msxml for windows, and then try to reinstall

• error-1603 Fatal error during installation__consult window installer help (msi.chm) or MSDN

  
  

  • during the installation of ORACLE 10 g on windows Vista Home Basic (32 bit).

  Fountain

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installerhttp://support.microsoft.com/kb/834484/en-us package

• Fatal error 1603. Windows help install (msi.chm)

  I know this is an old thread, but now with windows 7, any change?

  Separated from -.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/fatal-error-1603-Windows-Installer-Help-msichm/c5809658-cc5d-4546-b4dd-06d42d13c0da

  ColleenSchake,

  Cancel the registration and re - register the Windows Installer and check if it helps.

  1. Click Start, run, type "MSIEXEC /Unregister." without the quotes and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  2. Click Start, run, type "MSIEXEC/REGSERVER" without the quotes and then click OK. After you run this command, the operation is complete.
  3. Try to install the program and check if the problem persists.

  Arthur Xie has a good suggestion of the error: fatal error during installation-1603 screw it to TechNet Windows 7 Pro forums.

  Keep us informed.

• Empty box connection manager on in Excel 2003/Windows XP 32 bit

  Hello
  
  My SmartView connection manager is empty (please refer to the thread "Connection Manager box empty on in Excel 2007 on 64 bit")
  
  I'm in Excel 2003.
  FYI - I installed SmartView 11.1.2 seeing that it wasn't compatible with the APS 11.1.1.3 I uninstalled and then reinstalled 11.1.1.3. Don't know if its related or not.
  
  I had a look at the knowledge base on the site of Support of Oracle, my OS is Win XP, so it is not related to the 64-bit version.
  
  Help much appreciated. Rgds.

  Once you uninstall 11.1.2. and install 11.1.1.3 return, you delete a registry key.
  HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Options

• How to solve an error "HDD 1 (301)" on my HP Pavilion Dv7 notebook PC

  HP Pavilion Dv7 Notebook Pc with OS! Windows 7 Home premium 64-bit.

  Error message:-hard drive 1 (301) - it sounds like there might be a malware

  Virus on it. 2012 on the laptop with me AVG Internet Security. I do not know

  The guys at the shop where I bought it says that I must not update the laptop

  software and drivers to many.

  Hard disk 1 (301) is a hard disk failure. This means that the hard drive needs to be replaced.
  
  You will need get a new hard drive and install it, then you will need to reinstall the Windows operating system using the HP recovery media. If you are in warranty, HP will send you replacement parts by your warranty conditions.
  
  If you are out of warranty, you will need to buy a replacement hard drive, and then call HP to order the specific recovery HP for your portable media.
  
  The number of American support is 1-800-474-6836.
  
  I'll be happy to answer any additional questions or provide additional information if you want to replace it yourself. It is not too difficult.

• Install Windows 7 on formatted Pavilion dv7-7052sw

  Hello world

  A week ago, I bought the HP Pavilion dv7-7052sw.

  It came with Windows 7 64 bit Home Premium edition.

  I wanted to customize for my personal needs, change partitions etc...

  So I formatted it.

  I looked at the new installation of Windows 7 64 bit BOX.

  Everything goes well until the final step, installation restarts and fails on "Finish Installation" screen because

  system is unable to start services on my computer and I have to restart the instalation.

  I tried 3 times.

  I did not create a backup/restore disc.

  What is the problem? It's my first HP laptop and I don't expect problems like that.

  Installation disc that I use works fine on my old laptop.

  Need help please, I don't know what to do now...

  Please see 'Windows Setup cannot configure Windows on hardware on this computer' Setup on a Windows 7 or Windows Server 2008 R2 computer error for a possible cause of your problem.

  Installation from a Windows 7 SP1 disc or a USB flash drive should fix this for you. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 by using the 25 digit product key from the COA Microsoft on your computer.

  Please click the White Star of KUDOS to show your appreciation

• IDT HD Audio stuttering apps/games/tf2 3d - Windows 7 x 64 - Pavilion dv7-4113tx

  According to the rules, I have need of the State:

  I am an employee of HP, my views/opinions/etc are mine and do not reflect those of HP.

  I filed a bug report kind - but I don't know where to start, I do not work in an area that has nothing to do with the manufacture of products from HP; It is my free time now and I do not have intranet access .

  I recently got a HP Pavilion dv7-4113tx Entertainment Notebook PC [XV780PA] for my personal use, and overall, it was very good. It comes with windows 7 Home Premium x 64 bit.

  There is however a problem I have to implement what concerns games, or I guess any application intensive 3d, especially Valve games, my criterion of choice is Team Fortress 2. Edit: another game that stuttered, but less frequently - Serious Sam HD.

  The game works perfectly in native resolution (ed: change the lower resolution will not affect the bug)-I'm moving 100-120fps but about every 30 seconds - 2 minutes, there is an audio/video stutter (stuttering, she repeats the dernieres.5 seconds of audio about 3 - 4 times in a loop while the screen freezes on where begins the first audio stuttering) which will make the game of 'freeze' for about 2 seconds and then continue where you left off.

  Team fortress 2 is an incredible critical moment online multiplayer game, and this delay essentially means my e-death several times.

  I thought at first that it was the graphics card or drivers - I put drivers at latest on the ATI site, which has increased my fps, but the stuttering was always there. After searching around on the internet a bit, I found a suggestion to turn off the audio driver (like - Device Manager lists IDT High Definition Audio CODEC) as test - so I did.

  The game purrs like a kitten - absolutely no stuttering. my score went up immediately

  So, my next step was to try to get updated for the IDT Audio device drivers (note, I can't find a name of model anywhere in the features of hp - or on the internet really) - I've discovered IDT themselves cannot release the pilots, that these can be obtained through OEM.

  which brings me here.

  now - closest to the drivers, I found I needed here: Driver Audio IDT high definition (HD) for Microsoft Windows 7

  Note: - it says on the page that they are 32-bit drivers - but I found that they work with the 64 bit version of windows.

  These worked a little better - he fixed another problem - by the way if you use volume controls in an application full screen which she will spend on the desktop to display the scroll bar on screen volume down (what was probably redundant because windows 7 displays the volume of the speaker in the lower right corner)- and he turns just the audio down as expected.

  However - the stuttering is still very much present .

  Then, I tried to use the wizard to Support HP to run automated diagnostics and troubleshoot... which then downloaded the old drivers who gave me this issue of full volume control screen back again once - so I guess that the original drivers.

  So I installed the other drivers again.

  My next test will be to use an external USB sound card to see if that will allow me have games with sound.

  An agent appropriate at HP can you please address this concern and notify when this bug - IDT says they work with OEMS to solve problems on a regular basis on the IDT link above.

  In my view, that it is a question that will probably require a bug fix.

  EDIT: I will cross-post this to the game as well.

  second edition: added serious sam, res fullscreen downgrade info, reference removed firewire firewire no!

  Got a solution as possible here. Without changing the HARD drive (for me problem was there).

• Install Windows Xp on the Pavilion dv7 - 1147ca, no audio drivers. How can I find them?

  Recently, I've killed my Pavilion dv7 - 1147 Vista ca for the edition of office Xp Pro. I could find the drivers for pretty much everything, but I can't work in my audio drivers. I looked around, but really can't find anything on my product, in terms of troubleshooting. I don't really know what that you guys need information, so ask and I can get it for you.

  Problem solved. for someone else who has the problem, as soon as you install the MS UAA, it allows to detect certain hardware. Instead of having it go online to find the drivers, tell it to search in a specific directory on your computer. Even if you have the window "select a directory" open, run the sp45044 driver. The installation program will fail, but it puts the driver on your computer. return to the window "select a directory" and have it searching for C:\SWSetup\SP45044\WDM\WinXP. It now allows to install your drivers and audio will start to work immediately!

  Thanks for the help of Paul

• Help, please! Stop: c000021a {fatal error} the process windows logon system ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000)

  Hi, I really really need help. I have a Dell Optiplex 330 with windows xp pro. I tried to restore to an update of the service pack, and while he was complete I got this blue screen. I'm sure its a mistake with winlogon.exe. However, I don't know exactly what to do to repair or replace. I have my recovery disk. Help, please.

  I no longer need help. It took a little while, however, I was able to remedy. Yes! I'm not a computer expert or anything, but I've never needed the Geek Squad. However, I called almost done for this one. Laughing out loud. I'm so happy that I didn't have to reinstall the operating system. I have all my info. Yes! I keep large files so all my disks are always within reach. I was able to replace all bad files for registration through the recovery console.  Once you understand the computer language, the easier. There is hope. If someone needs information just ask.

• ttclasses connect timesten11g fatal error

  Hi Chris
  I run a simple ttclasses program core dump in timesten11g. But the program is OK in timesten7.0. The new ttversion is: TimesTen release 11.2.1.8.0 (64-bit Aix) (tt1121:53388) 2011-02 - 02 T 06: 01:49Z.
  The problem is too urgent for us to update the timesten. We holp a quick response on your part, thank you very much.
  Best wishes.
  
  My program is the following:
  #include < ttclasses/TTConnection.h >
  #include < ttclasses/TTStatus.h >
  #include < ttclasses/TTCmd.h >
  #include < unistd.h >
  
  int Conn (conn, TTStatus, TTConnection & tt_stat);
  int main (int argc, char * argv [])
  {
  TTConnection conn1.
  TTStatus stat (TTStatus::DO_NOT_THROW).
  int ret = Conn (conn1, stat);
  
  return 0;
  }
  
  int Conn (conn, TTStatus, TTConnection & tt_stat)
  {
  printf ("hhh\n");
  Conn. Connect("DSN=TT11","liangxiu","123",tt_stat);
  printf ("zzzz\n");
  If (tt_stat.rc! = SQL_SUCCESS)
  {
  printf ("TTError--:%s\n", tt_stat.err_msg);
  Returns - 1;
  }
  printf ("connect success\n");
  Conn. Disconnect (tt_stat);
  return 0;
  }

  Hi Grace,

  I still would like the information I asked for, but I think I know what the issue is here. From Timesten 11.2.1.6.1, TTClasses is always constructed with exceptions enabled and so a little against documentation, applications that use the TTClasses must include - DTTEXCEPT as the same compiler if preprocessor directive the application code does not use exceptions.

  Can you please try compilations/links in your application to test as follows:

  xlC_r - g - q64 - DTTEXCEPT - i/cdr1/home/tt11/TimesTen/tt1121/include-L/cdr1/home/tt11/TimesTen/tt1121/lib - o conntest conntest.cpp lttclasses

  and see if that fixes the problem.

  Thank you

  Chris