HP Deskjet 1513 oll all-in-one: print envelopes

With the help of Windows 10. Evelope #10 omits the half left of the sender's address. With the help of special size 4-1/2 x 7.8, prints only the right part of the address. Check all instructions., do not seem to be anything wrong. It works very well with the old printer HP Officejet Pro 8010, but too much bother to reset the status bar, so I bought 1513 just to envelopes and other special dimensions.

Sorry, but you'll have to contact HP support for help with your Windows 10 Deskjet 1513 driver problem.

Open the link: www.hp.com/contacthp/
Enter your product number or select Auto detection.
Scroll up to "still need help? Fill out the form to select your contact options.
Scroll down and click on: contact HP options - click Get phone number
File number and phone number will be displayed.

Tags: HP Printers

Similar Questions

  • I have HP Deskjet 3050 a all-in-One Printer - J611g and need help with printing, please?

    I just bought the HP Deskjet 3050 all-in-one printer-J611g a. The manual has shown to do the printer double-sided printing odd pages then only print even pages only, and it works very well for one page on one side of the sheet. However, when I want to print two pages on one side of the paper and another of two pages on another aspect of the sheet, print the odd pages or even pages only just does not work! Ditto to print more than one PowerPoint presentation on one side of the page, if I click on print the odd pages only, then the printer will display the odd number of powerpoint slide instead of print odd number. I used to have another printer HP Officejet and never had any problems with two-sided printing. This printer comes with the function double-sided printeing at all?  If so, how can I do duplex printing?

    Thank you very much!

    This is a limitation of the software that you use and how the HP printers recognize the incoming files. When compress you multiple pages on a single "page" this page is actually two pages, with even and odd numbers. It is therefore difficult for the software to determine the page numbers 'odd' and 'even' when printing, because it is no longer applicable to the relevant pages, but the format in which they are being printed.

    I hope this information is useful!

  • HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

    I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

    Hey @cmm3,

    Welcome to the Forums of HP Support!

    I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

    Step 1: Load the paper:

    To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

    Step 2: Check the print settings:

    Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

    1. Open Word and click mail merge to top
    2. Select "envelopes" in the upper left side
    3. A page of envelopes and labels should now open. Enter your delivery and return address.
    4. Select 'Options' on the lower right
    5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
    6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
    7. Make sure that you choose the option "Face down".
    8. Also ensure that 'right-hand Rotation' is selected
    9. At the bottom of the window, select the drop-down list of pet food
    10. Make sure that the feeding method is set to main tray rather then select automatically
    11. Press 'OK' and 'Print'.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • HP deskjet 3510 e - all in one printer

    My printer has stopped printing and scanning manuly but works on e I pad2 printing I tried all settings with no results, you can have launched me operations to manuly to foot print and also leave on e print fine .joe is

    Hello

    Try to remove and reinstall the printer... you can find the S/W in the link below

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5157483

    Choose the operating system and download the driver

    Drivers and printer full feature software e-all-in-one HP Deskjet 3510

  • Just bought a Deskjet 3520 e-all in one printer but moving to the United Kingdom, can I still use it?

    It says in the guide specifications power:

    Power adapter: CQ191-60017

    Input voltage: 100-240 VAC

    Input frequency: 50/60 Hz

    I recently bought the deskjet 3520 printer, printer all in one, but was accepted to school grad to the United Kingdom, I obviously want to take my printer with me but wonder If it will take a power adapter with a UK plug adapter? and if yes where can I get a.

    Hello

    Yes, but the problem is not different power, you only need an adapter for $ 5 you can find many airports or tourist shops. The problem will be inks. You may not be able to use the ink cartridges sold in the United Kingdom. You should contack HP to reset the printer. Please read this:

    http://support.HP.com/us-en/document/c02558798

    Kind regards.

  • HP Deskjet 8500 has all-in-one: printer printing and scanning in black

    Printed OK yesterday. Today it is printing full black pages, on black settings and color.  Also the complete black page scan.  Has been at rest - not off.

    Hello!
    Welcome to the HP community @ebe7fos,

    I read on how your prints and scans are now completely black when you use your Officejet 8500 printer and wanted to drop to help. Try the steps and answer all the following questions please and responds with the result, and we can go from there if necessary.

    Reset the printer and make sure it is plugged directly into a wall jack, avoiding the power and surge protectors toolbars:

    With the printer, unplug the power cord at the back of the unit.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the unit.
    If the printer does not by itself, press the Power button to turn it on.

    1. How the printer is connected (USB / wireless / wired / Bluetooth)?
    2. Did you test functionality of the hardware (made copies) and they work successfully?
    3. Have you tried printing from different programs?
    4. Have you tried to uninstall and reinstall the software?
    5. Run the print and Scan Doctor and understand the results.
    6. Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
    7. Have you tried using a different USB/Ethernet cable?
    8. You see messages of error codes and if so, what they say and where do you see them?

    If you have trouble, let me know and I'll do my best to help.

    Click on the "accept as Solution" If the issue has reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!

    We wish you a wonderful day

  • When scanning, the ADP does not work on my HP Deskjet 3510 e-all-in-one printer

    Ok.  This is my second time to enter in this.  I have an ADF and have tried SEVERAL times to scan but my scanner WILL NOT use the ADF.  I chkd information available on this forum but nothing I've tried has worked.  It is "operator error" or "hardware error"?  I tried to use this feature because I bought the printer and it never worked. Finally decided I had to see it through and try to get help.  But I worked on it for 4 hours and feel like a "hostage" - the frustration isn't quite describe how I feel now.  I get in a panick because I needed to scan 10 pps two hours ago and here I am STILL sitting trying to get this d * thing #$ % to work.  Help, please!

    THX Sylvie

    Hello

    Are you sure that the 3510 has an ADF? I can't see it ANYWHERE:

    The one on the top of the page here the input tray, ADF No.

    Kind regards.

  • Can my HP Deskjet 3520 e-all-in-one printer/copier/Scanner "scan to file"?

    All HP printers/copiers/scanners scan so I can create a file on my laptop for what is copied?  I think buying a refurbished, given that all previous HP scanner/copiers/printers worked without problem.  I replaces one that I bought about 9 years ago. Thank you!

    Hello

    Scan and copy are two different functions: to the scan function, you can save scanned images/files to your computer and to copy funtion, it copies and gives you on the discharge papers. Back to your question: Yes, it can create and save files to your computer using the scan function.

    Kind regards.

  • Problems install "HP Deskjet F2200/F2224 all-in-One Printer series full feature software and driver.

    Printers: HP Deskjet F2280
    Operating system: Windows 8.1

    Computer: Dell Insperion a 2330

    When trying to install the full feature software & driver I confronted with the following problems:

    1. I downloaded the driver & software above ok
    2. The Installer started extraction done ok and ok
    3. When I'm the appear 'Select install to begin installing new device HP' and click 'Install', I received the message "system cannot find the file specified."
    4. When I tried the troubleshooting described in http://support.hp.com/us-en/document/c04206080; searching for a file hpoins*.dat or hpwins*.dat, the file %windir%\System32 where not found!

    What can I do? Please H E L P

    Hello
    Follow the steps below and check if it solves the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

    Now, try to reinstall the HP software and check if the installation goes as planned.

    If the problem persists, continue following the steps below:

    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    Kind regards
    Shlomi

  • DeskJet HP 3050 all in one printer j10

    Hi I still need help please, I have a computer laptop windows 7 no cd rom im, tries everything to connect the wiressley printer, I a hub home bt with wps, on the printer, wireless light flashes can someone tell me in terms of can how to connect, use the USB for the process? I pressed set up pressed wireless dock until the 10 county then pres wps, sometimes, when I press on the wireless button it just goes straight to 2 min countdown, do you advise I just get bt to get a surcharge, please help, thanks a lot

    Download your drivers and software from the link below.

    http://WWW8.HP.com/us/en/support-drivers.html

    After downloading, it invites you to choose CONVERT USB wireless.

    Here is a manual, (page 35), explains how you can print wireless.

    http://h10032.www1.HP.com/CTG/manual/c02497809.PDF

  • DeskJet 3529 e All in One printer on LAN

    My network consists of two computers, Windows 7, 64-bit and Windows XP Home edition and the printer. Talking about Windows 7 with the printer and the internet. Speak it XP with internet, but NOT the printer. Messages enter the queue and stay.  Computers must must be synchronized with the network by pressing a button on the router. Is this something I need to do with the printer? If so, how. Albax

    I'm no expert, but I'll try

    In your network and sharing Center (Control Panel > network and sharing Center > edit Advanced settings) check whether you have the file and printer sharing. Are two computers in the same workgroup? (Conttol Panel > system > properties) Mine are both set for the WORKING group. Note to set up between an XP system and Win7 you can not use the homegroup settings, you must set a home or work network (home is preferable).  If you have not configured it, I can help with that too, I spent many a harrowing, trying to get mine to work.  What type of firewall do you use (that is to say the I have Norton 360 and Internet Security and use their firewalls, (another issue)).

  • HP Desktop 3520 e-all-in-one: Deskjet 3520 e-all in one printer does not print not black ink

    I just installed a new black cartridge of hp 564xl with an expiry date of 30/01/2017. Low and behold the black is not printing and the printer was bought in 08/2012. I did everything what was proposed in the support forums and nothing helps nothing worked. The three other colors print fine except the black. Based on the responses of everyone I guess that there is no compensation for her and I should scrap this device after three years of constant use. I think from now, there will be a solution to this problem, but Hp is not us.

    I am using HP printers because I bought my first computer in 1992 and never had any problems with them so far.  My second printer that was bought in 2004 still good, except that it is not wireless.

    If I need to buy a new printer wireless, I am sorry to say that I might have to watch the competition.

    If someone knows a solution that I would be grateful.

    The next step is to contact HP.  Even if your printer is no longer under warranty, they may be able to provide a solution.  After you contact HP post back here with the results please.

  • HP photosmart c628/0 all-in-one print envelopes

    ~ ~ No erroe message... printer seems to go thro the printing process, but envelope comes out blank... frequent jams... It does this on & off... can someone help me please? I'm in a writethon!... TY!

    Hi doe999,

    See printing and scanning doctor didn't show any errors, I suggest that you check and see if a firewall or anti virus protection is enabled and if yes, disable them and try to re-run the doctor.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

    Thank you once again for your time.

    See you soon,.

  • 2575 all-in-One printing envelope of irregular shape

    Try to print a 4 "x 5" envelope, I get an error on the printer saying paper is incompatible.    The envelopes are MS Word documents and I set the paper size in Word to the closest size to envelope, 4 "x 6", but still not the error.

    Douglas Hall

    Hey Douglas,.

    have you tried selecting "Custom" as the size of the envelope and specifying then 4 x 5 "? because the size specified in the Word document and the actual size should ALWAYS be the same.

    I have attached a screenshot which will help you to understand easily.

    Click here to see the screenshot

    Message edited by DexterM on 12/18/2008 12:37 AM

  • Paper jam in the printer HP Deskjet 3520 e-All-in-One (model SNPRH-1102)

    I had been using HP Deskjet 3520 e-all-in-one printer over a year until yesterday the printer suddenly jammed paper. I have some ideas out of A4 paper to let the printer works normally again. I need printer for printing currently. Please help, anyone here.

    Hi Lsyj,

    I can help you with the paper jam, you have experience. I found the following document that will guide you through the steps needed to solve the problem; A "Paper jam" message on the control panel.

    I hope this helps.

Maybe you are looking for

  • Can I change my physical keyboard?

    My questions is not on the settings of the software, but the hardware instead. I would like to know if I can change the keyboard of the MacBook Pro to another language/keyboard. Thanks in advance, Nuno

  • HP_tools necessary partition?

    I have a HP Pavilion DV6, I bought about 1.5 years ago.  I had to replace the hard drive because the original began to send me drive SMART imminent failure errors when I started.  The operating system had obtained if slow to start up, so I had to rep

  • Windows will not open, when I power my laptop, it just keep cycling until the start.

    I am running Vista Home premium, this morning, I opened Hotmail and froze my system (on my laptop).  I went to stop it.  When I started again, he came there an inconsistancy in one of the discs, so that a disk scan had started.  When he finished my s

  • Probs driver ThinkPad T40

    Hello I recently upgraded my IBM ThinkPad T40 of Windows 2000 Pro for Windows XP Professional (Service Pack 2). Clean install. I couldn't connect wirelessly to the Internet after the installation. I looked in Device Manager and saw yellow? against th

  • CP9: Multiple text entry boxes - 1 Submit button

    HelloI have several text entry areas (TEBs) and send button 1.Each TEB I have a:input variable of text from the user - v_teb1 (associated with the ETB).Variable for the correct answer - v_teb1_ans (do this way because I want to reuse the action advan