HP Envy 11-g010nr: network card lost HP Envy

Similar Questions

• I returned to windows 7 on my laptop Acer 5253 10 Windows and I lost my network card driver in the process.

  * Original title: jake

  I returned to windows 7 Windows 10 on my laptop Acer 5253, apparently, I lost my network card driver in the process. I want to download a network card for a usb key to solve the problem, but I don't know how. I have no internet access on the Acer so I can't download directly. I not had a disc with disks on it to Acer, they came preloaded. I am running windows 7 pro on the Acer and Dell desk top on as I type. Can someone HELP me understand this? I am not at all computer savvy and need help.

  Using another computer, visit the ACER support for your computer and download the drivers for a USB.

• HP ENVY 17-j184nr: to upgrade my network card but do not know if it would be not compatible

  I just got a new router. My computers internet (WLAN) was beyond terrible. I had an old dual band of D-link router and got about 17Mbps with it and about 50 Mbps on cable. However this new routher will actually two different frequencies, while the other is just them merged into one.  With the new router, I was getting some 55-60 Mbps Wi - Fi AND wireless (on the b/g/n wireless card). However, the next morning, I only get like 2 Mbit/s or less, running the same wireless card. I think that may be because the wireless card is not compatible AC could be the reason. I was eager to upgrade the network card but was not sure if HP has always been whitelisting them with this model. Do you still think it would make a difference? I just got this computer it not too long ago with the HP care pack of replacement and it gives me nothing else than problems, do you also think that they would replace it again?

  No whitelist. I had a 17-j029nr HP lent me and he had no whitelist and yet yours is newer so 100% free whitelist.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Want to 6-1100sl: network card wireless 6-1100sl want disappeared

  Hi, I bought an Envy6 fantastic 1100sl in 2014. Used only to work with a small charge. However, all of a sudden my (Ralink) wireless card stopped working and out of my system and its peripherals. Now, seeing the wlan led is always RED (also if the airplane mode is off). Tried to remove and reinstall (several times) the driver official of http://support.hp.com/it-it/drivers/selfservice/hp-envy-ultrabook-6-1100/5296040/model/5305952#Z7_30... but it is not worked, and now the only way to use it wireless using an external USB wireless network card.

  I'm waiting for a new SSD to accelerate my ultrabook; I will try to do a clean install of windows on my new SSD 10 hoping to operate the integrated Ralink Wireless card in return.

  My questions:

  I try a trick to revive this material before new clean install?

  What can I do if after the clean install the wlan card still does not appear?

  Thank you

  Salvatore

  Hello @cospps,

  Thanks for the information!

  I understand that you have performed the test hardware on the WLAN Module, and he said that the card was not installed.  I understand that you checked the map, to see if it is properly installed.  If you're still having problems, then you can consider replacing the WLAN Module.  You might want to test the card on another compatible device.  I hope this helps.

  Kind regards!

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• Network is lost after stanby mode - Satellite M40

  I'm from Holland
  I have a Dug Satalite M40 - 170 for several times that the network connection is lost after sleep.
  What is the sollusion. OS = Windows XP prof.

  [Edited by: admin November 23 05 07:07]

  Hello

  My unit is also connected to the company LAN. You use very often stand-by and hibernation mode, but after the awakening of procedure the connection is establish again shortly after.

  Try disabling the network card for a just a few seconds and turn it back on. This option that you can find in tool ConfigFree.

  Good bye

• Network card problem

  Hello

  I have a MacPro mid 2010, 2x2.66 GHz 6 core, 32 GB memory DDR3, nVidia GeForce GTX 760, disk SSD PCIE.

  It seems that I have the problem with the network card. At first, I noticed that control avid artist (a control unit for the music studios) lost connection randomly.

  After months of trying to figure out why this happened, Avid were certain that there was something wrong with my NIC card on my mac pro. It seems they are right, because I tested and I also noticed that when I am connected to a VPN, the VPN connection fell back randomly.

  I'm not sure if it's a hardware problem or not. I reinstalled it in OS X format from scratch. problem remains.

  Any ideas...?

  Thank you

  Alex

  After you have reinstalled the OS X from scratch we can assume that it is indeed a hardware problem initially. Then there are things to try-

  • Try the other network on the Mac Pro (he has two)
  • Try a different network cable
  • Try a different network Jack

  If not, help above, then it may be the chip rather than the plug or cable, whereby cases that the chip is soldered to the logic board, you will need to seek a different network card. This could be a USB one or a PCIe one. See below for examples.

  http://www.Apple.com/uk/shop/product/MC704ZM/A/Apple-USB-Ethernet-adapter

  http://www.KANEX.com/usb3lan

  http://www.sonnettech.com/product/prestogigpciepro.html

  http://www.sonnettech.com/product/prestogigpcieserver.html

• HP 2000 Vision: D1E80UA #ABA: Windows 7 Ultimate 64-bit drivers for network cards

  Upgrade from Windows XP to Windows 7 Ultimate 64 bit on a laptop HP 2000 Vision. Lost Wi - Fi connectivity. No recognized network card. Go: Device Manager: NO network card. No drivers for: Ethernet controller; Network controller; PCI device; SM Bus controller. Downloaded HP all software and drivers for: network drivers. Downloaded: Drivers for Ralink (HP) network on their Web site. The same problem. Need help. Any help would be greatly appreciated.

  Thank you

  Karl.

  You are the very welcome.

  You need these drivers for the remaining devices...

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56680.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp64801.exe

  Don't forget to install the graphics driver.  That rarely comes as a missing device, but if you see a standard vga adapter that is listed under the category of display device manager cards, this means that you need to install the graphics driver.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp58617.exe

• Pavilion 6650z: adding a network card Ethernet for Pavilion 6650z

  My Pavilion 6650z only has an integrated ethernet card that seems to have problems. I lose network connection every two days or more and when that happens the performance of open applications become sluggish. When I try to restart Windows or restart the PC, the process takes if for a long time I've just been turned off. Lost connections took place over time by using two routers different and many cables. Problem continues with the new gateway Xfinity Technicolor TC8305C that Comcast just sent me. Supported, it had no value. Unless someone can suggest other possible solutions, I intend to buy a separate Ethernet interface card. In this case, should what features I use?

  Downloaded the latest driver, but that didn't fix the problem. I have instaled since a network card and - fingers-crossed, after that more than a week of no drop-outs, it seems that solved the problem.

• Compaq Mini 110 c-1103SO: need drivers for network cards after upgrade to Win 8.1

  Woman's cell phone upgraded from XP to Win 8 Pro.  All set up, all the upgrades installed etc. disappeared.  Everything was fine, even got most of its programs to operate correctly and not had any problem with the internet.  Then fed Microsoft forces the OS update to 8.1 (PRO) and she lost contact to the internet.

  No other device have problems with our home WLAN, regardless if they are connected by a wireless router or cable.  The newly improved PC connects to the router, wired and wireless, but the connection is 'limited' and gives no net access.  Even when you try a portable WiFi connection with a Tablet, the connection remains limited.

  Contacted support technique microsoft: they claim 8.1 kernel is so different from 8.0 that the drivers on the PC no longer compatible (even if winning 8.1 was happy enough to re - install while improving...).  They also claim to be unaware that it even all compatible drivers are available for the cards we have.  This is their desire to 'help' ended and they told me to contact the manufacturer of the PC for those compatible.

  Network cards are: Broadcom 802.11 g network card and Qualcomm Atheros AR8132 PCI - E Fast Ethernet Controller (NDIS 6.30).

  What are the specifications for the drivers, I need and where can I get them?  Given that the affected device has no internet connection, I obviously need to download the drivers to another PC and transfer them using a memory stick.

  Grateful for the help earlier - wife is not very happy...

  You are the very welcome.

  Glad you were able to solve the problem by upgrading the equipment.

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• Cable connection part for good - once I started using the wireless NETWORK card!

  Hello

  I went although all people in support on this issue, but now I have no other choice than to ask all you people here!

  That is the problem. I have two computers with multiple network cards. One is a laptop computer with wireless Draft-N support and 10/100/1000 NIC onboard. The other is a desktop computer with an ASUS Wifi b/g edge and also dual GigE ports nVidia graphics card.

  Whenever I try to use network wired for internet or local network even cards use, it died on me. It is impossible to obtain an IP address from the router to use and is unable to communicate with anyone at all. Not even with my local network or even directly to the router (192.168.1.1). If I turn on the wireless card, it connects and everything is groovy (except that I lost my GigE connection to my local network, which is most important!).

  I havegone through the standard fare of cyclic power to the router and cable modem, reboot of my machines, etc. all the normal things, we are required to do.

  After some hassles with the support of Linksys to get them to send me a new WRT330N, I finally received a new WRT310N and it shows exactly the same problem! Wireless connections work fine, but as soon as I disable the WiFi and wired go, Windows XP gives me nothing else than a message "limited or no connectivity" and let me out of the network.

  This leads me to think it's some sort of network problem due to multiple MACs on the same host name. Does anyone know how to get around this problem?

  Thank you!

  Disable the firewall on the computer and then also try to connect the computer to the modem and check if the computer is able to connect.

• Adding a NETWORK card to an existing server of BB

  I just added a 2nd NIC to my long-term BB Server (v4.6 on Win2008R2). I added a separate management and become LAN to my company and BB need to monitor the speed on that subnet. I stop, added the NETWORK card and reboot, BB server does not start - gives a license error - 2. When I turn off the new NIC, BB server starts. When I re-enable the NETWORK card it does not start. I can disable the NETWORK card, start server BB, and then re-enable the NETWORK card and BB works as I would like, but when the server restarts, BB will not work.

  I've already messed with NIC link and changed the old NIC to get a higher priority than the new one, but BB continues to operate as stated above.

  ....

  Do I really need a new license file when adding a NIC or there is something simple that I'm missing?

  Jim Graczyk

  PS - I know that this is probably a question for a DELL/quest/BigBrother assistance team, but I'm confused out of proportion about how we'd actually do that. I was lost when we just had to deal with the quest nonolithic support system. Now that DELL has added that it is much less clear. I posted something about licensing, but I think it was a mistake.

  Any help would be appreciated.

  Jim

  Hi Jim,.

  Send your linfo output to support of BB. Cut it a new license for you.

  Kind regards

• Problem network card under Windows 7 Enterprise 32-bit

  Hello. In our Organization a few days, the following problems occur. Windows 7 32 bit installed on a machine intel NIC 82579lm lost communication. This thing happened to 12 32-bit machines. TCP/ipv4 Protocol is inactive. Reinstall the drivers, but the result is the same. At the beginning of the Working Group network card live cd. Restore point a mistake that does not unfortunately. Help, please.

  We found that a temporary solution begins at the point of restoration from the installation CD. So stop updates. Most likely, the problem is updated after the 22/10/2013.

  Hello

  Here are some tips that I wrote on Vista and Windows updates.

  It also applies to Windows 7.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the "bad" for your configuration, unless you read the information on the number of special KB and what it is for.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• vSphere replication - grouping of NETWORK cards

  We have a large virtual machine (60 to VMDK) we need to replicate to a second host.  We are currently receiving about 100 MB/s and it seems we're reached the limit of 1 GB.  I want to increase the bandwidth available for this large replication work by aggregating traffic through several nic is it possible?  If so, how?

  I tried the following approach, thinking that these operations can be based on the same transfer mechanism, but it has not made a difference.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & addresses...

  The KB points it is grouping of network cards that will help when you lost the active NIC then stand by will pass your tgraffic.

  Now coming to your scenario, you need to configure the user profile of the NIOC here you have to devote all the speed of the network to this replication job card. You cannot aggregate multiple Nic for reaching the combined capacity. We have a concept called LAG and LACP. but it will also give the speed that is independent to the different traffic