HP Envy 4500: Sharing network - delay of the printing press by day

Similar Questions

• HP Envy 4500 cannot connect wireless to the printer

  Recently I bought HP Envy 4500 printer. Connected to my router ok TP-Link3631 and have successfully printed from android phone and portable computer connected wifi but cannot print wireless from the office, running XP Pro, but allows you to print via a USB connection. Office see printer through a router using 192.168. etc and printed the report. Have tried to install the software via disc cd and internet several times, Inc. reinstall, but can not get computer to connect. Have been round and round in circles several times, also used print and scan doctor without success. It seems that the software is not fully installed. Or maybe something wrong with the network. Anyone have any ideas? Thank you

  Hi @atr345,

  I see by your post that one of the computers is not recognizing the printer on the network, but you can print by a USB connection. I can help you with this.

  Type the IP address in the address bar of Internet Explorer to see if the built-in Web page printer server load on this computer.

  Check the computer IPV4 address to see if it matches the first 3 games of the IP address of the printer.

  Go to start, type cmd in the search box, enter, then type ipconfig.
  Check the IPV4 address.
  Now, check the IPV4 address for the printer. (192.168.1.9)
  Do the first 3 sets of numbers match? (if they do not match then the computer is not on the right network)

  Try and ping the printer.

  In the same window, type ping printers (space between ping and IP address) IP address
  What are the results?

  If the available printer built-in Web server, the first 3 sets of numbers of computers had matched the address IPV4 of the printer and you could ping the printer, then try and configure the connection to printer wireless via the USB connection.

  Installation of the software of the printer for a wireless network connection.

  Please go to the first step: preparation for installation, number 4.

  If you need help, let me know.

  Good day!
  Thank you.

• HP Envy 4500: Claim Code problems. The printer is already done.

  Hello

  I am trying to add my new HP Envy 4500 to my account connected to HP, but when I enter the claim code, I get "the printer is already claimed. "In order to claim this printer, you must remove the previous owner.  Looking through the forum, it seems to be a fairly common problem.  I disabled / re-enabled web services to get a new code to claim, but it gives the same result.  I even reset the printer default and tried.  This time, connected HP indicated that it had saved my printer successfully, but when I go to the devices tab of the web page I am greeted with the message "it looks like you have not added all devices connected HP account".

  Any advice would be greatly appreciated, I'm hoping to use the instant program of HP ink, but unless I can add the printer to my account, I will not be able to.

  Thank you

  I managed to get this working afterwards by registering a new user account with HP with a different email address.  Not an ideal solution (and apparently not a rare either) but at least it works now.

• on my network card, a question mark appears that wasn't there. He appeared as a "switch" until I disabled "sharing network". He went away for a day and returned. This is a hack of nieghborhood?

  My mother is a modem from Qwest. I'm on a laptop with wireless on the same account. We were on a homegroup network. I found a question mark on its network card and a photograph camera, on mine with the name 'switch' and no other info on this subject between the computer and the modem peak. I called Qwest and they said they didn't know what it was. So I disabled all the sharing network. He went away. 2 days ago. Today, I checked again, he had again disappeared from the workstation but now it's back on mine, but it shows up as a question mark, as it did on the desktop. And also, there were a few weird anomilies appear on our computers. Do I have a virus or maybe a neighborhood hacker?

  If you use Microsoft Security Essentials, start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

  If this is not the case, go to your provider AV.

  You can also try this web site - http://www.bleepingcomputer.com - contains details for most common infections, often immediately after that they started to appear in the wild, and instructions are provided for how to remove infections using their malware removal guides. They also have forums where you can seek assistance from people who specialize in the removal of malware.

  Here are other free programs that can help:

  Malwarebytes anti-malware free - http://www.malwarebytes.org/products/malwarebytes_free Please note, do not accept the trial version of MBAM Pro that it will conflict with MSE while the free version won't.

  SUPERAntiSpyware Free - http://www.superantispyware.com/downloadfile.html?productid=superantispywarefree

  TDSSKiller (free) - http://support.kaspersky.com/faq/?qid=208283363

  HitmanPro (free for 30 days) - http://www.surfright.nl/en/hitmanpro

• HP ENVY 4500 Series (network): scan negatives

  I have the HP ENVY Series 4500 (network) printer/scanner/fax machine and would like to know if it is possible to scan 35 mm negatives and save them as a digital file on my PC?

  Hi @jvtorto,

  Only scanners with a media support Transparent able to digitize 35 mm slides.  The Envy 4500 series does not include such a feature and therefore does not support the slide or negative scanning.

  You can consider a scanjet.

  Negatives and slides scanning

  You can use the link above if you get a Scanjet which scan negatives.

• HP Envy 4500 will not scan to the MacBook Air Yosemite 10.10.3

  My printer connects wirelessly with my MacBook to print. It seems perfectly fine copy.

  However, the scan will be get no MacBook computer a friend and scan to it and refuses to scan at mine. I tried printing via system preferences > printer and scanner, tried to remove my printer and add it again to the impression that tried to download drivers for Yosemite to find that the error in the application downloaded impression told me that airprint was not working and the scan could not be completed. On my printer, my computer was never seen on screen as one scan to. How to solve this problem?

  Hi @LSarah,

  Welcome to the HP Forums!

  I noticed that you cannot scan with your printer HP Envy 4500 on Mac OS X 10.10 Yosemite. I'm happy to discuss this issue scan for you!

  Please, try the procedure described in this guide, connection error shows then scanand let me know what happens!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• Pinting/sharing, error 2114. The printer cannot be used by others on the network. Event ID: 315

  In my event log, I get the message "the print spooler could not share printer HP Deskject F2200 series with the HP Deskjet F2200 shared resource name.

  series. Error 2114. The printer cannot be used by others on the network.  Event ID: 315. "I have only one printer, and I'm not on a network share.  I only turn

  It's on when I need to use it.  Why I get this error?  It would cause my computer to freeze?

  BJB

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-2114/b87aa4ed-b4fb-43E0-9080-e3a7d7ffeaa3

  It will be useful.

• Re: The network connection to the printer has been lost.

  I'm having the same problem with a HO Photosmart 5520 and win 10. The solution to this annoying problem is far too complex and time consuming. Instead, it should be an option just to cut the sound notificaiotn.

  Welcome to the HP community @janhoza!

  I came across your post regarding your printer lost network connection and wanted to pop in to help.

  Through your message, we don't have the option to disable the notification. But I think that we can solve this problem by simply assigning a static IP address. Here are the steps:

  • Get the IP address of the printer, you can touch the 'Wireless' icon on the Control Panel printer to get the IP address.
  • Type the IP address in your web browser to get the EWS page on your computer printer.
  • Go to the 'Network' tab - click on "wireless (802.11), and then click «network address (IPv4)»»
  • Click on the box that says "Manual IP", then click "Propose an IP address manually" to give an IP address manually to your printer.
  • Click on the radio button that says 'Manual of the DNS server' and under manual type favorite 8.8.8.8 and manual replacement enter 8.8.4.4 (it is Google's DNS server address)

  Let me know if this helps. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Cloning of the network settings on the printer - Smart zero 4.4 clients using Xen

  I ran into an issue trying to implement for thin client network printers Smart zero with the build Z6X44017 (same question for with prior build 4.3; same question for T520s, T610s, T620s): If the printer is set by the 'user' account in the HP printer Mapping utility, it does not pass by in a published desktop, XenApp as a printer available to all.  When changing the account 'user' to the 'administrator' account, the printer is listed in the printer mapping GUI.  But it is not available on the published desktop.

  However, if the printer is CREATED or MODIFIED by the administrator via the GUI HP printer Mapping on the Xen login Panel, then it is displayed as the default printer on the published desktop.

  As we seek to implement dozens of devices at once with the same network printer queue defined, it would be useful to set up once and then clone the settings.

  Here's what I've done so far:

  1 use the GUI HP printer Mapping utility to create (in administrator mode) network print queue and check that it works on the published desktop

  2. use HPDM to capture the root > printer-mapping-Bishop and root > registry values printers from that device using a task of 'files and records.

  3. apply these registry via the job template settings to the target group of devices.

  It works very well with regard to obtaining the printer to display in the GUI of the mapping of the printers on the Xen login Panel.  However, the same problem exists: unless I go again in administrator mode in the GUI and the Edit/save the printer, it is not available on the published desktop.

  A possible solution might be to run a job to 'validate' the printer settings via a program that could be run from the command line, but I can't find such a program in the file system for the Linux client.  It's just a bug in the configuration of the printer, or a limitation of this printer MUST be configured via the GUI only?

  

  The local HP sales engineer for thin clients was able to track down the command of "committing" the printer settings after running the registry task to copy the settings.  It is run as a task of type Script as a template file and registry.

  Here is the command to run in the script:

  /usr/share/Manticore/plugins/printer-mapping-Mgr/wrappers/apply.sh "root/printer-mapping-mgr.

  It can be added as the second subtask under the task of file & registry.

  The complete solution is:

  1 use the GUI HP printer Mapping utility to create (in administrator mode) network print queue and check that it works on the published desktop

  2. use HPDM to capture the root > printer-mapping-Bishop and root > registry values printers from that device by using a "file and registry" tasks and save it as a template

  3 edit the template to add a second sub-task of Script to run the command ' root/printer-mapping-mgr ' /usr/share/manticore/plugins/printer-mapping-mgr/wrappers/apply.sh

  4. run the task of file & registry model against the target devices.  This model will then apply these registry settings for the group target devices and run the script to validate the changes on the target devices.

• Network cannot find the printer

  I have a laptop under Windows XP/Pro/SP3 and access the internet via a wireless (Linksys WRT54G Router). I connected a printer multifunction all-in-one of HP6310 to the router, using an ethernet cable and then installed HP6310 software on the laptop. Using the window "Add a printer Assistant", I selected "Network printer" and then receive three options: (1) travel - it is not the printer (2) connect to this printer - name: _ example:\\Server\printer - I probablydidn can't create the correct path and it did not find the printer. (3) to connect to a printer on the internet or on a home network or desktop. I do not think that this optio applies, but tried and could not find the printer.

  HP manual suggested that the problem may be an incompatibility of the printer gateways and router; I don't know what it means and how to fix the problem, if this is the cause

  Can you offer any suggestions?

  I have exactly the same problem. I can't see HP 7555 or 2605dn printer on my network with Windows XP pro. If I use Network Magic two printers appear. Both have the same door as my computer. Both work fine with other computers, wired and wireless, on the same network. I have a Linksys WRT54GS. I tried to delete all the HP software and reloading and nothing seems to work.

• Want 4500: Stops at halfway through the printing pages

  Whenever I try and print something, it stops at halfway through a page (could be first or after) and say that it can not print the page. Practically, I can't use the printer I'm just wasting a lot of time and a lot of money on ink. Want to throw it out the window but I don't got it about a month or two. Help, please!

  Hello
  This can happen when printing over the network due to a problem with the operating system while performing a print job using the WSD Protocol, which is the default protocol used by the operating system.

  Microsoft has released a patch that should answer this question.

  Install the hotfix below and check differences:
  http://support.Microsoft.com/kb/3000461/en-us

  If the problem persists, be sure to specify how the printer is connected to your PC.

  Please let me know if that helps get the problem resolved.

  Concerning
  Shlomi

• HP envy 4500: upper part scanning but the lower part of the older scan

  Hello

  I need an explanation of what could of happened to cause this problem.

  I've scanned 4 cheques, but only the upper part of the cheques would be real, the lower part was released as a previous check scanned.

  So basically all 4 cheques are the same except for the date and sequence number which was the upper part.

  That's happened? I'm so confused.

  Thanks in advance

  Hi sandra_s,

  You are welcome!

  Yes, most likely a connection problem, or a driver conflict. One of the two could be the cause of the software behaves the way that you describe.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• Laptop HP ENVY 15 - AH151: how to remove the trial version 30 days of McAfee which is preinstalled with my new PC

  I need to uninstall the trial version for 30 days of McAfee that came pre-installed with this PC I bought in January. I know it was preinstalled, but I can't find Ant real program/app.

  Secunia PSI or Revo Uninstaller shows McAfee, but when I search ThisPC I found

  41 cases of McAfeeModuleContent.resjson in the home of HewlettPackard\HO

  a couple of files C:\ProgramData\McAfee

  a file of C:\Hp\McAfee rules and

  a single file in C:\Program Files (x 86) \Hewlett Packard\HP Support

  Any ideas please?

  New Envy 15-AH151sa
  More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

  Try this direct link to the McAfee removal tool

  http://us.McAfee.com/apps/SupportTools/MCPR/MCPR.asp

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• EPrinter HP Envy 4500 Scan of the computer (HP Pavilion 14 Chromebook) / E-Mail?

  I just bought three HP Pavilion 14 Chromebook & HP Envy 4500 ePrinters for members of the family that I am trying to set up.  (I'm new to cloud computing).  Can I scan documents to PDF at the computer (Chromebook) / E-mail of the printer?  If so, how?  When documents arrive on the computer?  If the scan to e-mail is possible on the devices above, can I store several addresses e-mail ePrint in the printer choose?  Thank you!

  Hi eKeith,

  Thanks for shouting it and fast response.    No problem on other issues, it is we are here for.

  1. You will need to manually launch the built-in Web server.  What I've done in the past, it's just mark the ip address of the printer is to click instead of having to manually enter the IP every time. It works best if you set a manual ip address of the printer.  I've included a screenshot.
     1. Click on the "Network" tab in the SAP
     2. Click on 'Network' in the left side menu
     3. Click on 'network address (IP)' in the left side menu
     4. Click 'propose a manual IP address.
     5. Click on "Manual DNS server"
     6. For the server DNS preferred manual please enter 8.8.8.8
     7. For the auxiliary DNS Server Manual please enter 8.8.4.4
        
        
  2. There is no way to web analytics by default in pdf format.
  3. The default value corresponds to your "Downloads" folder, but you can switch to "Google Drive".
  4. If you click on the built-in web server Web Services tab, there is an option in the side menu on the left for updates. I've included a screenshot of where to find him.