HP ENVY 5530: duplex printing

Similar Questions

• HP Envy 5530: Since upgrading to windows 10, my laptop cannot see my HP Envy 5530 iwireless printer

  I have upgraded to Windows 10, since then my pc can't find my HP Envy 5530 wireless printer. I downloaded some sort of doctor scanning HP according to a previous post on this forum, but it does not work and my pc cannot see my printer yet. Please can someone help? My laptop is a Levono Idepad.

  Hey @Rayprinterman,

  I see that you have some problems with printing to your craving 5530 e - all - in - one printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Close any programs you have open on your PC.
  5. In your search type in printers bar and open devices and printers.
  6. Right-click on any icon of your printer listed.
  7. Click on remove the instrument.
  8. Repeat for all other icons of your printer listed.
  9. Click Add printer, and follow the prompts to add a new queue for your printer.

  Please let me know the results after following the above. If this allows you to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP envy 5530: E print app on my phone says this printer does not exist.

  I am trying to add my printer to my application on my phone and I get the error "this printer does not exist or you do not have access to him."

  I went on HP Connect site and it shows that my printer is online and ready to use.  I checked to make sure that everything has been updated. I'm not sure what I'm doing wrong.

  Here are a few extra in case info

  HP Envy 5530

  Windows 7 64 bit

  Thank you

  Hi @mcmoran2004

  Welcome to the Forums of HP's Support.  I understand that you get an error message when you try to add your printer to your HP ePrint app on your mobile device.

  If you get this error message when you try to add the printer to the application using the ePrint printer e-mail address, then follow the steps below.

  1. Please delete the app on your mobile device.
  2. Please turn off your camera mobile for a total of 30 seconds, and then power back on, please.
  3. Once your mobile device has completed its startup routine please download and install the application again.
  4. Please activate the application using your personal email address.
  5. After the activation of the application please try to add the printer by its address of email ePrint.
  6. If you still get any error message then, please call HP Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you do not live the USA/Canada region, please click here to find the number of Technical Support for your country/region.

  Please let me know the results.

• HP student laptop: how to print 6 x 4 & 7 x 5 photos on HP Envy 5530 e printer

  My daughter wants to print 6 x 4, 7 x 5 & A4 photos on photo glossy paper through its 5530 mobile & HP Envy HP student e-all-in-one printer series. Is could someone please advise me how my daughter can do this. Thank you.

  @Garry21

  • Install the full feature software to take advantage of features and options of the printer software.
  • Use a favorite program to open / view the photo > in print preview > Printing Preferences (Options) > adjust the size of the paper, type of media (paper type), selection of the status bar and other options

  Sounds too simple - and it can be as simple as that.

  The printer will be probably best to use HP paper - meet other quality brands can work perfectly, too.  In my case, HP Advanced Photo paper always gave good results.

  One caveat: a lot of printers that provide the photo tray bit limit paper size cannot be used in this sandbox to the size of 4 X 6 inches.  It is not always obvious that it is the case; the tray will sometimes adjust large sizes regardless of this restriction.

  For example, if you want to print on paper, 5 X 7,.

  • Remove the paper usually the main tray >
  • Place the 5 X 7 paper in the main tray - the print down side >
  • Adjust the sliding bar (s) to embrace the paper >
  • Use program > print preview / print preferences to tell the printer on the parameters of work >
  • and printing

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  References and help:

  Printer:

  Printer e-all-in-one HP ENVY 5530

  Full software features - 8.x Windows - Windows 10:

  File name: EN5530_198.exe

  Communicate details

  Exit the: 12 November 2015

  Version 32.3

  Reference:

  Install the full features software - printer

  Article (s) of interest include:

  • Preparation
  • Extras and optional > HP, Installation Help and Diagnostics information
  • Restart all
  • Download and Installation
  • Remove the printer software
  • See who and what is on your network

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  The user guide for the 5530 LIKE

  Print Photos - Chapter 3, Page 10

  In the Section How to > Print > Instructions and parameters:

  Creating custom paper sizes

  Print photos (Windows)

  Book - example:

  Photo paper glossy 100-Advanced-HP leaves/4 x 6-in. borderless

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Notes:

  If you can't find the paper size you want in the print preferences paper size list, you can create a custom form (custom size) for your special paper.  The number of parameters available for a custom form is somewhat limited; You can designate at least the size.  Start with such a type of paper (from the list of the available standard types) and the custom form should serve as sufficient results.

  Still available in 8.x Windows, you should find the program in the Windows Photo Viewer.  This is a simple photo montage and a print program that can help to put in place a photo impression basis.  The first time, you can print the picture on plain paper to make sure you get what you expect.

  More help - other programs and print options:

  Print - Programs_and_Methods

  Sections of interest include >

  • Photo Creations for Windows and Mac
  • Printing with the paint - modify Photo shape to fit the paper size
  • Photo printing with Windows for Windows Photo Viewer
  • Whereas the report l / h
  • Printing with paint
  • Printing Documents and Photos 5 X 7

  and

  Printing options

  Article (s):

  Custom paper sizes

  Model custom print preferences

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Envy 5530 cannot print even if the connected printer

  I installed the HP Envy 5530 series software on my Mac, OS 10.9.3 computer.  I get a message that the printer is not connected.   I ran the tests wireless network, everything going.   I even reinstalled the software.   I am able to print successfully from my IPHONE and PC laptop to work wireless.  Please help!

  Hello MacUser622,

  Welcome to the Forums of HP Support!

  I see that you are having problems printing from your Mac with the 5530 LIKE 10.9.3 new, knowing it will print from an iPhone and the PC is good news.

  You can try to reset the printing system on the Mac, this will delete maybe damaged driver. Mac OS x: how to reset the printing system will help you if not done before.

  Once done, repair disk permissions on the Mac.

  Uninstall and install the printer software and printing test. Uninstall better by going to Applications > HP > double click on uninstall and follow the steps. I suggest to use this to install with: 5530 ENVY HP e-All-in-One Printer series full feature software and drivers - 10.6 of Mac OS X v10.7, v10.8 v10.9.

  Let me know if you are now able to print.

• HP Envy 5530 wireless printing

  I recently bought the HP Envy 5530 for wireless printing after a terrible experience with an Epson wireless printer. Set up the printer on my desktop running Windows 7. The printer is connected to the desktop computer with a direct line-in (not of wifi capable office) and the printer is connected to my wireless network by connecting it to the router (Apple Airport Extreme). The printer connects, it appears so when I check the router (via Apple Airport Utility on my Macbook Pro) as well as tests of what the printer does it for wireless connectivity.

  Despite be connected to the wireless network, the printer does not register anything. I can't print from my iPhone or my Macbook Pro. The printer will work with the line-in directly on the desktop. I was wondering if what he touched, I deleted the line hoping wifi printing would be available. Not the case. The iPhone and Macbook both "send" the document to print, but nothing ever happens. All of the tools provided by HP diagnostic show that everything works fine. The router is about 10 feet to the printer and the printer indicates a high signal strength.

  If anyone has any advice or suggestions, I would be very happy.

  Hello @teedeewhy,

  Thank you for visiting the Forums from the HP Support! I see that you're running into some problems when trying to print on your HP Envy 5530 from your iPhone or your MacBook, it shows as connected but do not print. You have not the 5530 connected with a USB to your computer Windows and you have no problems.

  You should not have problems with both wireless and USB connection. There seems to be some sort of communication wireless with Mac problem, so let's go and start troubleshooting it:

  First I want to make sure that the printer is properly connected to the router Airport:

  Install your HP printer on a network with Apple AirPort

  Follow the steps and I would like to know if you are now able to print to your HP Envy 5530, I'll watch for your reply.

• HP Envy 5530 not print Word Document correctly / Jam

  I am having several problems with my HP Envy 5530. It says there is no paper in the tray when there's at least 50-75 pages into the tray. Then it will say paper (which is the standard of printing paper) is too short. It will start to print a page then says "Ink drying" and sucks the paper in the printer, causing a traffic jam. This happens several times. Then I fish the paper from the printer and that paper is unusable. I lost a lot of paper on this printer. When I get a word document to print, it does not print correctly. This is a 2 page document and it will print a piece of the first page at the bottom of the page with a gap from the beginning of the second page on top. All on the same sheet of paper. What I don't want at all. It is not at all my first problem with this printer. I am happy to my other question about color printing has been resolved, but it's not good. The scanner lid broke also. I feel like it was a bad purchase and I never had so many problems with my printer until I bought an HP printer. Not a good use of money and I think to return if possible.

  Hi @StudioLily,

  I'm sorry to hear that the printer keeps jamming and you get an 'out of paper' error message when there is a lot of paper in the paper tray. I want to help you.

  I would like to do a hard reset to see if that will solve the problem.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Printing a Network Setup Page.

  I submitted this document to the feed rollers check paper, paper for cleaning, (dust and dirt from the air can build up on the rollers, making them smooth, blocking the paper sensor) and check the print drivers to ensure that the paper type and size is set correctly.

  An "Out of paper" message on the control panel and the printer doesn't pick up paper.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• HP Envy 5530: HP Envy 5530 can print but cannot scan or copy

  Hello

  After that I moved into a new apartment my 5530 desire is not scanning or copying (but I can print wireless without problem).

  I have already tried:

  -install the updated drivers

  -perform the reset

  -activate the static IP address

  -newtork reset through the HP utility.

  Please advise how can I proceed to get my printer working properly again.

  Kind regards

  Tiziana

  Hello

  Please try the steps below...

  1. While the printer turned on, unplug the power cord from the back of the printer.
  2. Wait 60 seconds.
  3. Plug the power cord printer directly to a wall jack (bypass surge / power strip) and then to the printer.
  4. Now, make a copy.
  5. If the problem persists, select SETUP (wrench) > tools > Restore Factory Defaults
  6. Wait 30 seconds and then try to make a COPY.
  7. If the problem persists, open the lid of the scanner, and then press black COPY. Check if the scan transport moves and it's on.
  8. Transport scan is not turned on or move in all, then its time to replace the printer.

  Call the HP Technical Support for assistance. 1-800-474-6836 (USA)

• HP Envy 5530: HP Envy 5530 not print or scan

  I had my printer for a few months and have had no problems with it at all. I printed the 25 pages of back and front panels, less than a week ago. Now it won't do anything. I tried to scan, it says 'connection' and will never happened. I tried to print from my Chromebook, it won't. I tried printing from my iPhone, it won't do it either. I tried to send a printjob to enamel of the printer, in 10 minutes, I get a "failed" email It does not scan to e-mail or computer, but it is copy/printing. I tried to unplug. I tried to disconnect the wifi. Going back through all the set up again. I am at a loss.

  Hey @7radiant13,.

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have some problems with printing your urge to 5530. I can help with that.

  To start make sure the printer is plugged directly into a wall outlet , not a surge protector. Once it's done:

  1. Turn the printer off.
  2. While the printer is turned off, unplug your router for a minute.
  3. Once your router works again re - turn on the printer.
  4. On the printer, click wireless icon in the top middle of the screen to display.

  Now the following troubleshooting steps depend on what you see on the screen.

  • If you see a line indicating "status: not connected", then the printer connects is more to your wireless network. To fix this click on settings and then scroll up to the wireless configuration wizard. After you run the wizard to your printer will still once connected to your wireless network.
  • If you see a line that says "status: connected" and the IP address starts with "169.254" while the printer does not receive an IP address from your router. You will need to contact your Internet provider or one that provided you your router to solve the problems of the router.
  • If you see a line that says "status: connected" and the IP address starts with "172" while the printer is probably connected to a network of comments. You will need to contact your internet provider or the one who gave you your router to disable the network of comments.
  • If you see a line that says "status: connected" and the IP address contains all other numbers, then the printer is properly connected to the network.

  If you have a situation like the fourth point above and then to see what the printer goes to press home to return to the main screen. From there, tap the icon of web services in the upper left corner of the screen. If you have a line that says connected the printer is properly connect to web services. Try sending an e-mail to the address of the ePrint on screen printer. If this prints then there is something wrong with Google Cloud Print.

  For iPhone, you want to make sure that the iPhone is connected to the same network as the printer. If it is and you are unable to print, then you will want to contact your internet provider and make sure that the multicast is enabled on the printer.

  Please let me know how it works for you. If you have any other questions, please let know what happened when checking the above and I'll have a better idea of how to help you.

  I hope this helps and I hope you have a great weekend!

• HP Envy 5530: HP Envy 5530 - incomplete print document

  I just installed the printer and everything seemed fine until I printed a 7 page pdf document. printing was ok for 3 pages and then stopped mid page. After a retry him would not always the whole document printer. What makes printed was fine, without any problems of quality.

  Hello

  Install the hotfix from Microsoft, which should address the specific question:

  http://support.Microsoft.com/kb/3000461/en-us

  Please let me know additional questions,

  Shlomi

• HP envy 5530 Wireless: print only on the left excluded from the page. The right part shows a gray rectangle. Preview looks right

  My new printer works, but although I've marked the parameters for the letter and print preview appears correct, that the printed pages are coming on only the left excluded from the page.  On the right 1/3, there is a gray rectangle.  I really need to fix.

  Thanks again for your response.  It turned out that the printer was not to blame.  I was using the word 2016 and he had a setting of markup that was running.  When I turned is disabled, gray Panel went out.  Unfortunately, he seems to be the default setting and returned.  But until I figure out how to fix I just check the section of markup on the Ribbon and make sure it is off.

• HP Envy 5530 photo print App?

  I need to print photos that are smaller than 4 x 6 inches, on a single page of paper 8.5 by 11 inches.

  I tried the HP PHoto Solutions, but it does not print sizes smaller than 4 by 6 inches.

  Hello

  Software HP Photo Creations allows ptint small multi photos on a single sheet of paper as directed:

  

  You can size print

  Kind regards.

• Re: Fast draft between Chromebook HP and HP Envy 5530 printer

  Hello

  I was delighted when I bought my new HP envy 5530. Prints well and I like the feature where I can emial directly on the printer.

  The big disappointment is the following... I have an Acer Chromebook. Use Chrome Web Store rather than the game store, so I can't download HP eprint. I can't install the software b/c I don't have a cd player.

  Is it possible to print on my new HP envy 5530 to and Acer Chromebook?

  Hello chromebookuser,

  Welcome to the HP Support forums.   I understand that you have a Chromebook and your printer Envy 5530 and want to get the program installation and operation.

  The first step is to connect the printer to your wireless network.  This can be easily completed from the front panel of the printer.  If you do not know how do steps are in your User Guide page 55 in the section titled "to connect the product with the wireless configuration wizard.

  Now that the printer is connected to your wireless network, we need to enable the web printer services.  This too can be completed the façade.  Please refer to the code of request for printer if you need assistance. Please set up your account connected HP or HP ePrintCenter.  Using the printer application code, you can now Set Up a Custom E-mail address for ePrint.

  Now that we have customized the ePrint printer e-mail address we can implement Google Cloud Print.  I have included the Google Cloud Print help with your HP printer to guide you through the process.  You should now print with Google Cloud Print.  For any additional consultation, I have included print a Page from Google of document.

• HP ProBook s 4430: hp envy 5530 e - all - in - one printer prints not after windows 10

  I got Win 10 installed for a few months and have just tried to print with my HP Envy 5530 e printer. I tried a doc in Word and he showed that he was priinting, but he vanished from the queue after about 15 seconds.

  -C' is my default printer and displays "series HP Envy 5530 (network).

  -my wifi is connected

  -J' tried to unplug machine and wall & turn off wifi

  -J' tried troubleshooting, but he could not identify a problem

  -J' tried to update.

  -J' uninstalled and reinstalled with disc and I have uninstalled and reinstalled online

  -Print and scan doctor = all OK

  -Test print = print and submitted, but disappears after seconds too

  -internal print has no print

  -disabled firewall only = no print.

  What Miss me? I've never had a problem with Win 7.

  Hi rb101,

  Your suggestion to contact our assistance worked!  I had a conversation with someone, and they changed my driver to a generic driver and that's...

  Thanks a lot for all your help

• HP ENVY 5530: Option of printing black ink

  The HP ENVY 5530 has an option to print "BLACK ONLY."?  I want to save ink of color when the color is not necessary.

  Your help will be appreciated.  Thank you!

  Hello

  Yes it a. copy the value of preferences in the context of quality to select the option "Black ink" only as a default value. Please note: even print in black only, always use a little during the reheating process color inks. HP Envy 5530 can print when one or 2 color ink "tanks" (but not all 3) are empty.

  Kind regards.