HP ENVY 5530: Installation HP ENVY 5530

Similar Questions

• HP Envy 5530 does not print after installation (Windows 8)

  After completing the installation steps of my new HP Envy 5530 on Windows 8, I can't get anything to print, but a print quality diagnostic report.   What I see is the document is in the queue of the printer for about 30 seconds (as it is printing), but the printer itself does nothing.   Subsequently, the document is deleted from the queue.

  I tried the following:

  -Use of printing HP & doctor scan (4.3) to diagnose the printer.   He said all "extract very well", but when I try to print a test page, I see the behavior described above.  However, the "internal test page works.   It says I have a problem of software that he can help me with.

  Uninstalling/reinstalling the software of the printer (by the 'doctors' recommendation), no change

  -Download the latest software from HP support (no effect, the same behaviors) printer driver

  -Conversion of the printer Wireless USB (no effect, the same behaviors).

  Reminder: This printer is for domestic use, with a traditional desktop computer (HP p6-2376).   It replaces a HP Photosmart printer which stopped working last month.    I'm on Windows 8, 64-bit with patches up-to-date.

  Any suggestions (apart from what I tried)?

  Hello

  Please, try the following steps and let me know if that can help you:

  1. In the Control Panel, select uninstall a program and uninstall the rated HP Envy 5530 base driver software.
  2. Click the R keys on your keyboard and the Windows Logo appears in the Run dialog box.
  3. Spool type and click OK.
  4. Open the Drivers folder, and then select the x 64 folder if you have a 64-bit OS or the w32x86 if you have a 32 bit OS
     Note: visit http://whatsmyos.com/ to find your type of operating system if necessary.
  5. Open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
  6. Reinstall the latest version of the HP software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-115828-5&CC=us&DLC=en&LC=en&OS=4158&product=5304883&sw_lang=

  Shlomi

• HP ENVY 5530: Installation of HP ENVY 5530 in Apple MAC

  I'm not entirely sure what version of Mac, it is, but it's recent. I'm helping a friend with it.

  Install the drivers directly from the HP site. We use it over WiFi (no USB cable connected). Printing fine but scanning is a difficulty.

  When I run a scan from the printer by using the form, the mac, but also the printer responds with an error message indicating that there is a communication problem. Therefore an analysis of the printer does ot work.

  When I run a scan of the Mac, everything seems to work fine, I don't see the scanned image (pdf file) in the screen of the mac. But when I try to find the document (scan) on mac, I don't know where it is stored.

  So UI have 2 problems:

  -How can I solve the communication problem when I run the scan from the printer?

  -where scanns (pdf or jpg) stored on the mac?

  I know my way arround in Windows but not very good at Apple.

  Hey there @wandelaar , welcome to the forums!

  I read about the problems that you encounter with the scanning from the printer Panel, for the Mac and I hope to help. Since it is wireless, it could have been an interruption, which could very well cause the error 'communication '.

  I suggest you try power cycling the network devices to start:
  

  1. Turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).
  2. Plug the router back in and wait another minute, then turn on the printer and the computer and try again a sweep of the façade.
     

  Regarding the scans saved on the Mac, they generally record in your photos or Documents, folder in a subfolder named for the scanner or the installed software. You should be able to open the HP Scanning software to the Mac to change the saved scan destination and chose where you want to have sent and saved in scans.

  Please keep me posted to let me know if scanning works again from the front panel, and I can make a few suggestions more if necessary!

  Please also indicate which runs Mac OS X: what is my operating system?
  

  Have a great day!

• Re: Fast draft between Chromebook HP and HP Envy 5530 printer

  Hello

  I was delighted when I bought my new HP envy 5530. Prints well and I like the feature where I can emial directly on the printer.

  The big disappointment is the following... I have an Acer Chromebook. Use Chrome Web Store rather than the game store, so I can't download HP eprint. I can't install the software b/c I don't have a cd player.

  Is it possible to print on my new HP envy 5530 to and Acer Chromebook?

  Hello chromebookuser,

  Welcome to the HP Support forums.   I understand that you have a Chromebook and your printer Envy 5530 and want to get the program installation and operation.

  The first step is to connect the printer to your wireless network.  This can be easily completed from the front panel of the printer.  If you do not know how do steps are in your User Guide page 55 in the section titled "to connect the product with the wireless configuration wizard.

  Now that the printer is connected to your wireless network, we need to enable the web printer services.  This too can be completed the façade.  Please refer to the code of request for printer if you need assistance. Please set up your account connected HP or HP ePrintCenter.  Using the printer application code, you can now Set Up a Custom E-mail address for ePrint.

  Now that we have customized the ePrint printer e-mail address we can implement Google Cloud Print.  I have included the Google Cloud Print help with your HP printer to guide you through the process.  You should now print with Google Cloud Print.  For any additional consultation, I have included print a Page from Google of document.

• HP envy 5530: failure of software download

  Hello

  I just bought a new printer. I managed to download the eprint app and it works from my Iphone and Ipad. When I try to download the installer on my MacBook, I get a failure message. "Sorry for the inconvinience, but something happende for download etc."

  Hope you can help me. Quite irritating.

  Hello

  Here is the link to download for your printer on MAC 10.10

  http://FTP.HP.com/pub/softlib/software12/COL51758/MP-125221-5/HP-envy-5530-series_v12.34.0.dmg

  For detailed instructions on setting up the printer on MAC software, see this LINK

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• HP Envy 5530 e-all-in-one: envy 5530 E cannot detect alignment page

  I'll put up a new e-all-in-one printer HP Envy 5530. I went through the installation OK, until I got to the part about the alignment of the print cartridges.  It prints the alignment page, it will copy even, so I know the scanner works. I printed several pages and they all look great.  But when I use the ink cartridge alignment tool it does not detect the alignment page in the scanner.

  Yes, it is face down on the scanner

  Yes, the cartridges are installed OK

  Yes, printing seems good

  Yes, the scanner can scan and print pages, even the alignment page

  What else to try?

  Thank you

  Well, too bad. I unplugged, moved the card to a regular wall outlet instead of a power strip, and it is turned on, ask to do a print alignment.

  I did, it printed the page, I put the page on the scanner and it completed the alignment.

  I don't know what the problem was earlier, but it worked this time.

• HP ENVY 5530: Scan to email problem

  I have a problem of "scan to e-mail"

  Many worked yesterday, now it says "there was a problem connecting to the server.

  He sent me the code 'connect' e-mail - so a communication that happens...

  He repeats to me it is a problem of HP Server and forums keep instructing me to stop the 5530 WANT and reset the wireless hub - I did this 13 times already and he won't do something else that wasting time!

  I am able to print via Google Chrome Cloud Print, is not MY network problem, my printer connects every time my router wireless EA, no problem.

  For example, HP has a mail server problem, solutions?

  Printer model: HP ENVY 5530

  Hey @lgstorbay,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to scan to email using your HP ENVY 5530 e-all-in-one printer.  I would like to work with you on this. I have some suggestions that could restore this functionality for you.

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices and scan to e-mail setup.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here. In addition, you need to add your printer via Google Cloud Print, if you have completed this step. Click here for instructions.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  Then, tap the scan icon and enter the e-mail address you want to scan to.  Then, recover the PIN than you should automatically receive and complete your scan to contact the installer.  Ideally, if you are able to get this good service will be fully functional.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Acer A700 Tablet will print not to envy 5530

  I just bought a HP Envy 5530 and I love the printer. I could easily set up through my home WIFI network and have 3 different computers that print to envy.  However, try the print of my Acer A700 Tablet function, 5530 desire does not appear as a printer which can be "recognized" by the Tablet PC.  Is there a workaround that I can use or solution in a different way to be able to print to the envy of the Acer?  Thank you!

  Hello

  I suggest download you the HP eprint app or HP all in one printer from the game store remote app.  If your new Acer Tablet running android, both of these apps should allow you to print to your printer wireless.

  After installation, you will need to ensure that your printer and devices are connected to the same wifi network.

• HP ENVY 5530 screen stuck with message 'check' product update

  HP ENVY 5530 has worked very well since July 2014, but September 17, I noticed that the screen of the printer is reading 'check' the product update and is hanging there... I can still print, but will not erase the screen on the printer. It seems to be hung while trying to check for product updates. How can I erase it and get the printer to complete successfully the task of verification of updates?

  Solved my problem.

  That's what I did:

  uninstalled all the software associated with the envy of 5530.

  Unplug the power cord from the wall and the printer.

  Unplug the USB cable from the printer.

  Downloaded the latest version of the software for the 5530 like from the HP website.

  Installed the software.

  Plugged the power cord to the wall and printer.

  THIS PART IS IMPORTANT > lifted the top of the printer to expose the inside of the printer where the ink cartridges. This stage caused the error message to delete the printer screen.

  Then I plugged the USB cable into the printer and the PC and the printer took over the installation of software and drivers.

  Now the printer is in working condition.

  NOTE: After it was over. I saw on the screen of the printer that a product upgrade has been active and completed successfully.

  HOPE THIS HELPS.

• HP student laptop: how to print 6 x 4 & 7 x 5 photos on HP Envy 5530 e printer

  My daughter wants to print 6 x 4, 7 x 5 & A4 photos on photo glossy paper through its 5530 mobile & HP Envy HP student e-all-in-one printer series. Is could someone please advise me how my daughter can do this. Thank you.

  @Garry21

  • Install the full feature software to take advantage of features and options of the printer software.
  • Use a favorite program to open / view the photo > in print preview > Printing Preferences (Options) > adjust the size of the paper, type of media (paper type), selection of the status bar and other options

  Sounds too simple - and it can be as simple as that.

  The printer will be probably best to use HP paper - meet other quality brands can work perfectly, too.  In my case, HP Advanced Photo paper always gave good results.

  One caveat: a lot of printers that provide the photo tray bit limit paper size cannot be used in this sandbox to the size of 4 X 6 inches.  It is not always obvious that it is the case; the tray will sometimes adjust large sizes regardless of this restriction.

  For example, if you want to print on paper, 5 X 7,.

  • Remove the paper usually the main tray >
  • Place the 5 X 7 paper in the main tray - the print down side >
  • Adjust the sliding bar (s) to embrace the paper >
  • Use program > print preview / print preferences to tell the printer on the parameters of work >
  • and printing

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  References and help:

  Printer:

  Printer e-all-in-one HP ENVY 5530

  Full software features - 8.x Windows - Windows 10:

  File name: EN5530_198.exe

  Communicate details

  Exit the: 12 November 2015

  Version 32.3

  Reference:

  Install the full features software - printer

  Article (s) of interest include:

  • Preparation
  • Extras and optional > HP, Installation Help and Diagnostics information
  • Restart all
  • Download and Installation
  • Remove the printer software
  • See who and what is on your network

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  The user guide for the 5530 LIKE

  Print Photos - Chapter 3, Page 10

  In the Section How to > Print > Instructions and parameters:

  Creating custom paper sizes

  Print photos (Windows)

  Book - example:

  Photo paper glossy 100-Advanced-HP leaves/4 x 6-in. borderless

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Notes:

  If you can't find the paper size you want in the print preferences paper size list, you can create a custom form (custom size) for your special paper.  The number of parameters available for a custom form is somewhat limited; You can designate at least the size.  Start with such a type of paper (from the list of the available standard types) and the custom form should serve as sufficient results.

  Still available in 8.x Windows, you should find the program in the Windows Photo Viewer.  This is a simple photo montage and a print program that can help to put in place a photo impression basis.  The first time, you can print the picture on plain paper to make sure you get what you expect.

  More help - other programs and print options:

  Print - Programs_and_Methods

  Sections of interest include >

  • Photo Creations for Windows and Mac
  • Printing with the paint - modify Photo shape to fit the paper size
  • Photo printing with Windows for Windows Photo Viewer
  • Whereas the report l / h
  • Printing with paint
  • Printing Documents and Photos 5 X 7

  and

  Printing options

  Article (s):

  Custom paper sizes

  Model custom print preferences

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Envy 5530 series: HP Envy 5530 scanning problems

  I have a computer laptop, MSI game with wireless connection to my HP Envy 5530 series printer/scanner

  On my desktop, double click on the HP Envy icon used to bring up a menu to choose what to do with the printer. It worked great for scanning. IDKY but now when I double click the icon even a useless window comes with 2 unnecessary options and no scanning options of the computer. What happened to HP? Why change a good thing? I don't know how to start a scan now. Of least not without deep research for the button. I have not yet found.

  So I try different options to try to scan something including installation HP Support Assistant and HP and Scan Dr. printing performance. At the end of this installation and Scan Dr. run he had the opportunity to test the scan. This was the case, I saved it in a file, but the file would not reopen so she almost but does not solve anything for me. I want the simple button that works well again. Where at - it go?

  Hello

  My suggestion: install softare and the driver on your computer using the fillowing:

  http://ftp.HP.com/pub/softlib/software12/COL47810/MP-115828-6/EN5530_198.exe

  After that,.

  (a) ion on desktop, double-click

  (b) select manage the Scan of the computer
  (c) click on Enable.

  You can start automatically with Windows, BUT you will get an arror message if you turn on the computer FRONT of the printer.

  Now you can scan computer or ptrinter.

  (Note: I have tested and used the same printer for over a year and no problems what so ever).

  Kind regards.

• Printer Envy 5530: why I can not connect my Macbook on this new printer? Download HP and Apple and disc. NO.

  My HP Envy 120 died today after only 13 months. Bought the 5530 want to replace. My Macbook running lion 10.7.9 impossible to install the software of Apple, HP or the disc drive. Please someone tell me what to do. It seems crazy that each site recommend one for download. If the download n 't possible that they would be kind enough to give me an error message. life is too short for all that. Have installed ink cartridges, but will be back tomorrow if I can't make it work. Need a printer! Thank you very much for ANY help! Very grateful in advance.

  Hello @Islandedisto,

  Welcome to the Forums of HP Support!

  I would like to help you today with the installation of your new HP ENVY 5530 e-all-in-one printer on your Mac OS X 10.7. There is a chance that the old remains of your HP Envy 120 drivers cause a conflict when you try to install this new printer Envy. Can I please have you follow the steps below to solve these conflicts to occur.

  Step 1: Resetting the printing system:

  To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. do not add your HP Envy in at this time.

  Once the reset is complete, proceed to the next step.

  Step 2: Uninstall the drivers and software:

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation. This should clean up any software and drivers for your old HP Envy 120 institutions.

  Once the uninstall is complete, please continue on.

  Step 3: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 4: Check the Apple updates: 

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Install the drivers:

  1. Please click here to download the latest full-function software package and the driver for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the steps on the screen to install your new HP Envy

  Once installed successfully, your HP Envy, please try printing and scanning to ensure the full functionality of the product.

  Please reply to this message with the result of your installation. I look forward to hear from you!

• HP Envy 5530: Software and HP Envy 5530 lost hp printer solution Center icon cannot sweep

  When I upgraded to Windows 10 I lost my icon and the ability to scan from my HP computer on my printer HP Envy 5530 wireless. I'm unable to scan from Windows Fax and Scan. I downloaded the latest driver and software from HP. I have uninstalled and installed the software nothing works. Help, please.

  I tested the feature. I have two HP printers and both work with my laptop. I can finally print with my office on my printer HP Envy 4500 (many uninstalls and reinstalls the software.)

  I used the wizard install HP for Windows, but my success was when I found the original installation disc.

  I use McAfee and have disabled and enabled it to the left. I ran doctor Scan and print and it on Rota software I had and "installed a later version" that has not worked. I have therefore re-installed using my original installation disc.

  My basic problem was that I could not scan. I can print but the HP 4500 Printer Wizard Envy series using I get that 'the envy of HP 4500 series is not found'. I tried to unplug the router and switch on the computer and the printer.

  I installed an HP AiO Printer Remote App and I can print it from there, and I AM ABLE to SCAN now with this app.

  Thank you for your help and suggestions.

  roarjmj

• A9J40B: New printer: HP Envy 5530 transport Jam/Paper Jam

  I just purchased and received this printer. After the installation of the configuration and installation of the printer, he tried to print a report, but it will never work.
  He guard sends me errors and says that there is a blockage of the cart. I looked inside everywhere but this is a new printer and it seems perfectly clean. Its power to seize a white paper and then spits white. It keeps eating all the paper and sometimes give an error. I can continue or clean all that I want, nothing seems to help the problem. I tried the wizzard but he said all right and I need to print a status report, but I can't.

  I really hope I will get this problem solved, because this is a new printer.

  Greetings, tnx in advance, Jasper.

  Hey @Sjappie84,

  Welcome to the Forum from HP Support.

  I understand that you encounter some false jam errors on your HP ENVY 5530 e-all-in-one printer.  I would like to help.

  This is what looks like a brand new printer, I recommend that join you our technical support team. You can click on the following link to start a business: www.hp.com/contacthp/

  Once you complete the form online to build your business, you can choose among different means of direct contact (email, phone, chat).  This will be your best option to enjoy your printer warranty options.

  I hope this helps.  Have a great day!

• HP Envy 5530: I replaced the black cartridge in my printer. She refuses to print in black only now.

  I ran all the standard tests. Black printing will produce only on cartridge color if used singularly. Print heads have been cleaned. Printer has updated its auto preset and no analysis of a printed item will be printed nor will be a printed document or the other. All prints have tried so far were in black ink. All worked perfectly until the change of the ink cartridge. Replacement cartridge used was a standard 301 HP black cartridge.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882/document/c03765731/

  Let us know.