HP G62 turn not

Similar Questions

• QString turns not in UTF8

  Hi all

  I have attached a sample application which I parse SOAP api and received the answer of webservice and convert UTF8 response but QString turns not in UTF8 so can you check my app?

  I convert as below but still not get

  QString finalVal = responseValue.toString();
  finalVal = finalVal.left(finalVal.length() - 1);
  finalVal = finalVal.mid(1);
  QString text = QString::fromUtf8(finalVal.toStdString().c_str());
  termsWebView->setHtml(text);
  

  Note :-if I put static QString while they convert to UTF8 but I put Analyzer QString then they do not convert to UTF8.

  You will need to make sure they are off escaped as well.

  for example:

  If (next == 'r') {}

  result += "\r";

  } Else if (next == 'n') {}

  . . .

  } ElseIf (next! = 'u') {}

  . . . (like what)

  } else {}

  . . . (like what)

  }

• Battery error HP G62 and not work on DC only

  Hello

  I'm trying to fix my girlfriends laptop with no luck. Laptop is out of warranty, as it is 2 years old. It is a model of HP G62 running Windows 7

  If I turn on the laptop with battery and AC connected, the battery in the tool bar icon indicates the laptop is not connected to the power supply. Laptop will work very well for 5 minutes, sometimes for an hour and all of a sudden it shut down.

  If I try and put it back on it does not work. I have to leave a few minutes (I guess for load) and then it would still work for a short period.

  If I remove the battery and turn it on with just the adapter, the same thing would happen. The battery icon would say that there is no paste connected and after a few minutes it turns off.

  For the last few days I also get the following error I turn on the laptop:

  "HP battery alert."

  The system has detected the following battery storage capacity is very low. For optimal performance, this battery will need to be replaced.

  Battery (internal) (601)

  "ENTER - continue starting.

  I did the battery check by pressing F2 that the laptop is turned on and I get the following output:

  "Battery test: primary - secondary replace (42) - DO NOT INSTALLED (60).

  FAILURE ID: PGC621-5336QG-9XL03G-C0EN03

  PRODUCT ID: XC220EA #ABU

  Main battery

  -----------------------------------------------------------

  Battery test: FAILED

  Press ESC (esc) to go to the main menu or click on the button below. »

  I can't make the HP online diagnosis that the laptop goes down the middle of it.

  Does anyone know how this could be repaired?

  Do I need a new battery or mother or else Council?

  Thank you.

  Stefan

  Hi f4n3,.

  Here is a link to a BIOS update that should fix your problem.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100738-1&CC=US&DLC=en&LC=en&os=4063&Product=4232511&sw_lang=

  Thank you

• Computer laptop HP G62 does not load

  I have a hp G62 154-canotebook. About 6 months ago, there was a problem with the cooling system (nothing to do with the fan a kind of plate), but fortunately it has been supported by my warranty with hp.  Three months after my battery problem has started; He emptied so quickly that I had to keep my computer plugged in all the time. I decided to buy a battery but rather than having a 6-cell with battery life ridiculously down, I decided to replace it with a 12 cell. A new set of problems started, my computer began to load intermitenty, until it collapsed alltogether charge and basically could not start. A few weeks back, I tried my old battery on the computer and it started, but I couldn't always reboot my computer. I don't think that the charger is at fault. I think the problem is internal. Using a battery 12 cells, which was not compatible with my computer was not a good idea. A clue to understand my problem is the fan of my computer become more noisy and turned more quickly for a minute before returning to normal. I want to fix mine and I'm looking for clues on how to solve this problem. If you can help my giving the easy solution will be appreciated and I. If you can not I would like to know how to go about learning how to repair a laptop, hp can provide me with a model of my model? etc.

  Thank you.

  Best thing to do is to try a good knowm adapter, yours may be at fault.

  HP does not provide much information other than the maintenance manual.

  Here are all the manuals HP provides for this model

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=4142862&query=G62%20154&tool=&

• Pavillion g15-ab117na: new Pavilion g15 laptop turn not

  So I had my laptop since new year's day and today he knows he'd do an update and would need to restart. I ignored it but does it anyway a few minutes later and he went about installing updates as usual but now is not turn at all. The battery still had half of his life, and I tried to take the battery and now the power button and all that but nothing has worked! When I press the power button, the small light beside it flashes three times but nothing else! I can't even oped to remove the cd, the cd player. Can someone give me help? Thank you

  BTW, your laptop is a laptop 15 series, not G15.

  Your bars of memory are not accessible to the user. Contact HP for warranty repair.

  I will ask to have your escalated isue.

• My laptop G62 does not illuminate

  I was sitting at my friends house on my pc. I let the battery 20% until I charge it because I didn't let the battery run for a day or two and it should be done to ensure the life of the battery. When I plugged in I continued to use it. But he's dead. And since I could not get on. Ive used 3 different Chargers HP to load, and it does not load. Im not sure whats wrong with it. The only thing I could think is that the port that the charger switch is messed up on my PC.

  Could someone provide me with assistance and possibly a number so you can call HP and ask them to address this issue. I saw a lot of technical but I'm not sure what number of HP I want repair.

  Thank you

  Try this:

  remove the battery, other devices and the AC adapter... Press and hold the power button for 20 seconds... Plug the power adapter only and turn on the laptop...

  • Click on start and type device in the search for field, and then select Device Manager.
  • Expand the batteries category.
  • In the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.
  • On the taskbar of the Device Manager, click Scan for hardware changes.

  Alternatively, select Action > search the hardware changes.

  Call HP would be your last option...

• [SOLVED] X100e turns not on after overheating

  I have a (long off-warranty) of the model dual core X100e (notorious for running hot), to which I've been running Linux on; the question at issue is related to the material, however...

  Background: I tried to get an amd64 kernel will, with some problems.
  So I started a kernel amd64 with init = / bin/sh, I tried to do without continuous thread and thought that I needed a different kernel, I put on the compilation...
  The laptop has reached 92 C and apparently tried to stop, but apparently shutdown does not work well if init is not running. So I came back to find him still running, to ~ 65 ° C, but with messages indicating that he had reached 94 C on the screen. I put the fan in full flow, left turning for a while, then turned it off.

  Now, here's the problem: when I tried to turn it on (battery in place, connected), the green light around the power button just started flashing slowly (about once per second), with the fan intermittently try to start (very short bits of almost weeping noise). There was no indication of any signal to reach the screen / from BIOS.
  The power light stays green when plugged. Same symptoms when the battery is removed and it is plugged.
  Only on batteries, the power button blinks when you press on, then turns off. The fan comes on briefly once. Then it turns off. The power light blinks in front, then turns off

  So far, I've tried several variations of "hold the button of power while that unplugged with the battery removed." All this was without effect. Looking through the HMM does not indicate anything whether in regard to what could cause this.

  The solution was to dismantle the system, unplug the CMOS battery, then go up. (I pressed as the area where the power button would go, just to be sure, it was completely empty) Of course you must load the defaults in the bios, because he thinks that the number of supervisor password has been exceeded. I don't see how to mark the thread as solved earlier.

• Internal microphone will turn not on/stopped working... help

  OK... so The Interal Mic has stopped working - it will not record audio in videos or recordings. It is not the PC speakers because they work perfectly. The internal MIC is on & I also never used any other USB Mic.  Another thing, I tried Mic TROUBLESHOOTING - no problem was detected.  There also, the Mic light (red) when the Mic works does not turn on either.

  I sometimes wiped the computer area webcam & mic with a not-very - wet cloth could... which might have damaged it?  I bought this laptop - about 2 years ago and it stopped working for a few months.

  @DarkestMidnight ,

  Hello and thanks for posting back with this information.  Yes, it's perfect.

  So what you may have been a problem here is that the internal MIC is connected with the webcam.

  A lot of times on computers cell phones because of the way the cable is routed through the readjusted screen, they can be removed when you close the screen causing it to loosen it enough to make the microphone to fail.

  Here is a link to the maintenance and care guide.  It will show you how to access the cable to make sure that the connection is still strong.

  Maintenance and Service Guide

  This is a video that shows how to replace the screen, and you can use this to access the connection of the webcam and the microphone.

  HP Pavilion Notebook replacement screen procedure G7

  I would like to know how this goes for you.

  Thanks again for posting and have a great day.

• HP G62 fan not working not not :/

  Hi, I have a hp laptop g62-454TU that has worked very hot lately. Recently when I was using my laptop on a desk the screen went black. I assumed it was overheated just as usual except when I rebooted it, there was no fan noise and there was a message saying that the cooling fan is not working and ask if I wanted to continue. I pressed on enter and it boots into windows. 10 minutes after if overheated and shut down again. When I rebooted, it came with the same fan not work message so I let it close. I can't use it. I will buy a dm4 soon but I would like to know what the problem is and if I can do anything. I don't know much about computers. At the moment I am using a Samsung 7 years so I need a solution. Should I buy a new computer? My HP is 2 years old and frequently overheated before. Thanks for your time.

  Replacing the fan may be the answer with a good cleaning & radiator Setup review.

  You may be able to get a light use out of it in it now raised about 25 mm & having a table fan boy blowing through it to help remove some heat & cool just run.

  Unfortunately high that running time & bad thermal design & components is a standard feature of HP, a leading cause of poor life of laptops & of common failures such as hdd death in 18 months or less.

  Do your homework before investing in a new laptop...

• Laptop not charging and not turning not not on also

  Hi, my laptop (dell Inspiron 15 7000 series-7537) is not load, tried the charger with another laptop and it works, certainly isn't evil, it also sometimes does when I load it charger 'as it indicates no current charging"on the screen... Any ideas on what to do or I have to send in repairs and how much it will cost me?

  The system light up at all?  If not, unplug, remove or disconnect the battery and hold the power for 30 seconds.  Remove the base and remove and reinstall the bars of memory.  Plug the AC adapter and see if it will turn on.  If it goes with the battery disconnected, but not with it connected, the battery is bad.

  If it still doesn't light up, check the USB ports for damaged pins that can cause a short circuit.  Otherwise, if you have already tried a new Dell adapter without result, the power supply is the next possible suspect - who is part of a $35:

  www.Parts-People.com/index.php

  If replacement that does not solve the problem, looking at a replacement motherboard - the order of several hundreds of dollars for the party as well as the labor to install.

• HP G62: Can not access the keys on blue character on PC HP G62

  I'm unable to access the blue characters on the keyboard, despite trying to hold control, shift and shift to the right at the same time.  Could someone tell me please how to do this?  Thank you

  Hi @Nomie637,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the blue function keys keys. I'll be happy to help you.

  Please look at page 32 of the laptop user's Guide. He will explain how to use the function key.

  If still the issue please read some keys to function or keyboard shortcuts Do not work correctly with Windows 7.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.  To simply say thank you, click the Thumbs up below!

  Thank you.

• Lenovo r61 turn not

  my laptop was working perfectly until yesterday. the laptop started fine and stop all of a sudden. when I put the cord adapter the laptop turns on without pressing the power button and he shutd down after 2 seconds off nothing display.

  yesterday, I tried to start it with a dead battery by pressing the power button for 10 seconds after which I put in the adapter and the battery. I also removed the battery and ac adapter and tried, but it did no good. Please help me ASAP

  My specs:

  Lenovo r61 7743-a17

  Intel Core 2 duo 1.8 ghz

  4 GB of ddr2 ram

  Windows 7 64-bit operating system

  graphics NVIDIA quadro nvs 140 m

  If the laptop works properly without installed drive, then it's what you need to do. It is difficult to tell what is causing your problem, it could a short circuit, a dirty or component connector defective.

• PIXMA 5320 turns not

  My 5320 does not illuminate.  Tried unplugging the unit for awhile reconnected.  Wall outlet.  Another cord.  Nothing.

  Unfortunately I had already tried this.  Account maintenance costs it probably looks like another piece of garbage to obsolescense integrated goes to the landfill.  So unfortunate we don't build things to last or be easily usable.

• laptop not turn not not on

  When I try to turn on my laptop, I pressed the button and looks like it wants to start up, the screen is black and nothing happens

  Take the laptop to a service technician.  You have a hardware problem.

  Good luck.

• HP Pro Book 450 G1 turn not away and hard reset does not

  Hi all

  My new HP Pro Book 450 G1 will not activate to return, and a blinking next to the AC adapter when I press the power button. I tried the method proposed reset elsewhere on this site (e.g., out of battery and other external sources, unplug, hold down the power button for at least 15 seconds, etc.), but it does not work. Another suggests about how to fix this?

  Thank you!

  -JS

  Do not consider this issue. I realized that I was with my other computer power cord... stupid mistake. Thanks to all who helped to think of a solution - I hope I have to not inconvenience you too. My HP now works correctly.