PIXMA 5320 turns not

Similar Questions

• QString turns not in UTF8

  Hi all

  I have attached a sample application which I parse SOAP api and received the answer of webservice and convert UTF8 response but QString turns not in UTF8 so can you check my app?

  I convert as below but still not get

  QString finalVal = responseValue.toString();
  finalVal = finalVal.left(finalVal.length() - 1);
  finalVal = finalVal.mid(1);
  QString text = QString::fromUtf8(finalVal.toStdString().c_str());
  termsWebView->setHtml(text);
  

  Note :-if I put static QString while they convert to UTF8 but I put Analyzer QString then they do not convert to UTF8.

  You will need to make sure they are off escaped as well.

  for example:

  If (next == 'r') {}

  result += "\r";

  } Else if (next == 'n') {}

  . . .

  } ElseIf (next! = 'u') {}

  . . . (like what)

  } else {}

  . . . (like what)

  }

• Canon Pixma MG3520 - does not light

  Canon Pixma MG3520

  I have just printed/copied paperwork this week!

  It absolutely, positively, not light.

  I bought this last semester, which would have been around January or February of this year.

  It has not been moved, the circuit on the Strip, to which it is connected has not been triggered, everything must be in perfect working condition.

  How can I go about it? Reset somehow? Send it for repair? Do a dance and sacrificing a Nikon?

  Help please. I will need very soon for the school.

  Update:

  Fact a little research and it is a known problem with the firmware.

  See here: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg3520?p...

  And here: http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg3520#Drive...

  I unplug for a bit more than two minutes and did not return.

  Now, at the beginning when I was doing the instiallation, he says that he has failed. But I turned the printer and turn it on again (hah...) after failure and we are back online and print. So I don't know if the firmware updated succeeded. But the printer works again and that's all that matters for now!

• Pavillion g15-ab117na: new Pavilion g15 laptop turn not

  So I had my laptop since new year's day and today he knows he'd do an update and would need to restart. I ignored it but does it anyway a few minutes later and he went about installing updates as usual but now is not turn at all. The battery still had half of his life, and I tried to take the battery and now the power button and all that but nothing has worked! When I press the power button, the small light beside it flashes three times but nothing else! I can't even oped to remove the cd, the cd player. Can someone give me help? Thank you

  BTW, your laptop is a laptop 15 series, not G15.

  Your bars of memory are not accessible to the user. Contact HP for warranty repair.

  I will ask to have your escalated isue.

• [SOLVED] X100e turns not on after overheating

  I have a (long off-warranty) of the model dual core X100e (notorious for running hot), to which I've been running Linux on; the question at issue is related to the material, however...

  Background: I tried to get an amd64 kernel will, with some problems.
  So I started a kernel amd64 with init = / bin/sh, I tried to do without continuous thread and thought that I needed a different kernel, I put on the compilation...
  The laptop has reached 92 C and apparently tried to stop, but apparently shutdown does not work well if init is not running. So I came back to find him still running, to ~ 65 ° C, but with messages indicating that he had reached 94 C on the screen. I put the fan in full flow, left turning for a while, then turned it off.

  Now, here's the problem: when I tried to turn it on (battery in place, connected), the green light around the power button just started flashing slowly (about once per second), with the fan intermittently try to start (very short bits of almost weeping noise). There was no indication of any signal to reach the screen / from BIOS.
  The power light stays green when plugged. Same symptoms when the battery is removed and it is plugged.
  Only on batteries, the power button blinks when you press on, then turns off. The fan comes on briefly once. Then it turns off. The power light blinks in front, then turns off

  So far, I've tried several variations of "hold the button of power while that unplugged with the battery removed." All this was without effect. Looking through the HMM does not indicate anything whether in regard to what could cause this.

  The solution was to dismantle the system, unplug the CMOS battery, then go up. (I pressed as the area where the power button would go, just to be sure, it was completely empty) Of course you must load the defaults in the bios, because he thinks that the number of supervisor password has been exceeded. I don't see how to mark the thread as solved earlier.

• Canon Pixma Pro10 will not load any document in the manual feeder

  I just bought a Cano Pixma Pro io. Have spent the last 48 hours trying to load paper A4 inkjet fine art 225 g among others. He absolutely refused to accept any document. Don't want to force it because it's new printer anf his goes back if I can't solve this problem. Can anyone help!

  Its a new day here in County Kerry Ireland and I want to thank the guys who responded to my query.

  He was misreadding the terminology. I was selecting the quarterdeck and not the manual feeder.

  Complete stupidity on my part.

  I printed my first art print and hope that it will be the first of many.

  Great forum! Syra

• Internal microphone will turn not on/stopped working... help

  OK... so The Interal Mic has stopped working - it will not record audio in videos or recordings. It is not the PC speakers because they work perfectly. The internal MIC is on & I also never used any other USB Mic.  Another thing, I tried Mic TROUBLESHOOTING - no problem was detected.  There also, the Mic light (red) when the Mic works does not turn on either.

  I sometimes wiped the computer area webcam & mic with a not-very - wet cloth could... which might have damaged it?  I bought this laptop - about 2 years ago and it stopped working for a few months.

  @DarkestMidnight ,

  Hello and thanks for posting back with this information.  Yes, it's perfect.

  So what you may have been a problem here is that the internal MIC is connected with the webcam.

  A lot of times on computers cell phones because of the way the cable is routed through the readjusted screen, they can be removed when you close the screen causing it to loosen it enough to make the microphone to fail.

  Here is a link to the maintenance and care guide.  It will show you how to access the cable to make sure that the connection is still strong.

  Maintenance and Service Guide

  This is a video that shows how to replace the screen, and you can use this to access the connection of the webcam and the microphone.

  HP Pavilion Notebook replacement screen procedure G7

  I would like to know how this goes for you.

  Thanks again for posting and have a great day.

• printer Pixma MG8150 does not

  I installed a canon pixma MG8150 on a print server in a domain.  I can access his page web config and get a ping reply but when I install the printer on a computer and send a command to print (still a test page), the print monitor rises Sané "printer does not.  Why?

  Hi mick_s70,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

• Printer (Canon Pixma MP480) do not print

  My Canon Pixma MP480 won't print on my computer, but print on other computers that do not have Vista. I installed the driver several times more directly from the cd that came with it and directly from canon website. I am registered under an account to administer. It is directly connected via a USB port. The strange thing is, it's an all-in-one printer, scanner, copier, and it allows me to scan images on my computer. When I try to print a document, it times out. No error message appears on the printer LCD. It works on my friends computer that uses windows XP... My operating system is Vista 64 x.  If anyone has any advice I would be recognizing an email to

  Hi davemsee,

  Have you try to download the latest driver for your printer from Canon?
  Make sure that it is the Vista x 64 bit driver when you download and install.  Remove the old driver completely and restart the computer before the upgrade to the new driver.

  Post back with the resulf so we can provide you with more support, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Canon Pixma mg3200 do not print

  I just bought a Canon Pixma MG3200 and I can't seem to print on my HP laptop Windows 7 x 64... someone at - it advice?

  Moved from feedback

  Original title: Canon mg3200 will not work

  Hello Deborah,.

  The simple answer is to go to the canon website and download the driver here: http://www.usa.canon.com/cusa/support . You will need specific printer model number. This approach will you get the latest driver, avoid any problem of corrupted drive and give you a forum site for questions specific to the printer.

  Let me know if this helps you.

  Kind regards

  BearPup

• HP G62 turn not

  I have a HP G62 I've had for about 2 years. It started crashing not too long and has gotten to the point where about five minutes after that be turned on he would give me the blue screen with white rental and restart the computer. Now it won't even turn on at all. He had battery problems and I had to keep permanently connected. Now when I plug the power cord in the light does not even save it is plugged. I get nothing... Any help is appreciated.

  Superbrandi,

• Laptop not charging and not turning not not on also

  Hi, my laptop (dell Inspiron 15 7000 series-7537) is not load, tried the charger with another laptop and it works, certainly isn't evil, it also sometimes does when I load it charger 'as it indicates no current charging"on the screen... Any ideas on what to do or I have to send in repairs and how much it will cost me?

  The system light up at all?  If not, unplug, remove or disconnect the battery and hold the power for 30 seconds.  Remove the base and remove and reinstall the bars of memory.  Plug the AC adapter and see if it will turn on.  If it goes with the battery disconnected, but not with it connected, the battery is bad.

  If it still doesn't light up, check the USB ports for damaged pins that can cause a short circuit.  Otherwise, if you have already tried a new Dell adapter without result, the power supply is the next possible suspect - who is part of a $35:

  www.Parts-People.com/index.php

  If replacement that does not solve the problem, looking at a replacement motherboard - the order of several hundreds of dollars for the party as well as the labor to install.

• Lenovo r61 turn not

  my laptop was working perfectly until yesterday. the laptop started fine and stop all of a sudden. when I put the cord adapter the laptop turns on without pressing the power button and he shutd down after 2 seconds off nothing display.

  yesterday, I tried to start it with a dead battery by pressing the power button for 10 seconds after which I put in the adapter and the battery. I also removed the battery and ac adapter and tried, but it did no good. Please help me ASAP

  My specs:

  Lenovo r61 7743-a17

  Intel Core 2 duo 1.8 ghz

  4 GB of ddr2 ram

  Windows 7 64-bit operating system

  graphics NVIDIA quadro nvs 140 m

  If the laptop works properly without installed drive, then it's what you need to do. It is difficult to tell what is causing your problem, it could a short circuit, a dirty or component connector defective.

• Device, injet printer pixma ip2700 do not print

  does not print

  I corrected thanks walter

• Printing problems with a Canon Pixma MX882 do not print the correct paper size.

  This is a new PROBLEM.  Never had this problem before.

  I'm under Windows8, 64 bit.

  I am suddenly unable to print all labels postage to NORMAL size = 100%.

  He coinstantsly everything shrinks to half size no matter what I change settings.

  I've looked through the software and the printer settings and may NOT know what is the cause of the problem.

  The assumption is that MS Updates caused the problem.
  The resolution has been going to the Canon USA site.
  The very recent updated drivers was available for my printer.
  Download and install the updated drivers solves the problem.