HP L7680 black ink prints a few yellow some not black, no Magneta or Cyan, but the cartridges are full

Similar Questions

• Canon Pixma MG5320 printer does not print. Ink tanks are full, but the pages are blank. Help, please.

  I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.

  Hi marsha3236,

  To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern.  If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink.  To print the nozzle check pattern and make cleaning, please follow the steps located here.

  If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.

• 6500 a Ofdficejet: my HP Officejet 6500 will not print black. The cartridge is full

  My printer prints black; the cartridge is full and recognized.  There seems to be a loose rubber around the print sensor ring

  Hey @PickDan,

  Welcome to the Forums of HP Support!

  I see that you have problems with the printing of the all-in-one printer Officejet 6500 a. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after the above, that you are unable to print correctly, the printer must be replaced. You can contact the HP Support by clicking this link and filling out the form below to see what options are available.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on the thumbs up icon. The two icons are below this post.

• HOW can I FIND THE CARTRIDGES ARE EMPTY AND that it FAULT REPLACE HP printer fax C309 using windows 7

  HOW can I FIND THE CARTRIDGES ARE EMPTY AND that it FAULT REPLACE HP printer fax C309 using windows 7

  Hello

  Please use one of the following methods:

  http://support.HP.com/us-en/document/c00257147

  Kind regards.

• My printer epson stylus cx7800 blank paper prints. Cartridges are full

  It is as if printing correctly, however the documents come out in white! cartridges are full and everythings shows it should work.

  My guess would be that you need to clean the heads.

  http://files.support.Epson.com/htmldocs/cx78__/cx78__ug/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Epson&file=maint.htm#wp1021512

  John

• 6000 yellow HP printer does not print, however the cartridge is full of ink

  My HP Officejt 6000 printer has stopped printing yellow even if the cartridge has plenty of ink.  Why?  Can I make a correction on mine?

  Hi Dodeee,

  1. you have made no changes to the computer before the broadcast took place?
  2 are you able to print using other colors?
  3. what operating system do you use?
  4. do you get an error message?

  Try the steps from the following links:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Download and install the drivers from the following link: http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3866939&taskId=135

• Deskjet 1000 printer - J110a: printer prints a blank Page - HP anthentic color and black ink cartridges are full

  Used this printer for months without problem until he ran out of color ink. Buy genuine HP color ink on amazon and replaced the empty color ink.  Installed the latest driver. Printer seems to work fine except the rest blank page. HP Print and Scan Doctor 4.9 finds no errors, no problem.  Cleaning print head. Aligned printhead printed normal test result on the page. Results of tests on white page. Yet performance printer continues to give green checkmarks on all issues. No error found.  I followed the video instructions from HP customer support, but the problem persists.  http://support.HP.com/us-en/product/HP-DeskJet-1000-Printer-series---J110/4066042/model/4066376/docu...

  Given that you've tried the HP web site, try these videos Youtube here.

  https://www.YouTube.com/results?search_query=DeskJet+1000+print+head

  Find out more if necessary.  If no joy, your printer is toast.

• All-in-one Photosmart HP 7510: Photosmart 7510 - black ink cartridge print does not, but the tests are very well

  All the test prints are very good.  I have cleaned the print heads, broken cartridges.  I just replaced all the yesterday.

  Today, I can't print black.  The documents are great dimmed or blank pages come out.  I use a MacBook 2007, 10.6.8.  What else do you need to know?

  Thanks in advance!

  Hey @jas493,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I see you have a recurring problem of print quality with your HP Photosmart 7510 e-all-in-one printer.  I want to help you with this.

  What you describe, it seems that you tried all HP recommended troubleshooting steps.  Fortunately, given that your printer has a removable printhead, there are some other steps you can take to address the issue:

  Check the status of print head warranty

   

• E all-in-one HP 3520, ink cartridges are full but are only printing header and footer in blue?

  performed a test page to the printer is only printing in blue ink. printer is running on Windows 8, please let know us if I need to re install or download updates

  Hi Colleen48,

  I see that you are having problems with your printer.  I have a few questions.

  When you print the test page only blue ink prints?

  When you print only blue ink is printing?

• I can't go to my printer. It will not recognize the ink cartridges are full!

  My epson 7400 has not been used for 6 months. I cleaned and aligned the nozzles and it used 2 full cartridges. I installed new ink cartridges, and he says they are empty. Now none of the buttons work, it does not seem to recognize all commands. What should I do?

  Hello

  Turn the printer off

  Unplug the printer from the computer and the wall outlet

  Reinstall the cartridges

  Support all the ink cartridges until they snap into place to make sure that they are well housed

  Close the cartridge cover and push it down until it snaps

  Close the scanner

  Press on the Stop button to start loading of ink. It takes about 2 minutes.

  When the the light stops flashing and remains on, the ink load is complete

  	Caution:
  Never turn off the Epson Stylus CX while ink is in charge or you'll be wasting ink. If the ink light flashes, press on the Stop button and lower all the cartridges safely Manually clean the print heads Plug the printer into the wall outlet and the computer.  Turn it on and try printing again. Updates

• My HP photosmart 6510e all-in-one scanning pictures in black and white but the docs are still in color.

  Scan pictures into my a6683w HP Vista in black and white, but the documents still scan in color.

  Hello there ingridt, welcome to the Forums!

  I noticed your post on the scans of your Photosmart 6510, scan to your system from Vista in black and white. I want to offer my suggestions to you to see if they can help you with this.

  First of all, try to launch the HP print and Scan Doctor who is used to fix the printing and scanning problems. You choose the option "Scanning" when the tool is run. It will inform you if the software is completely installed, or if there is a problem, it can not correct. If it detects an error and shows you a red 'X', I suggest then uninstall and reinstall.

  Here are some links to help with uninstalling and reinstalling if you happen to do these steps.

  1. uninstalling the printer software

  2. restart your PC

  3 reinstall: Photosmart HP 6510 e-All-in-One Printer - B211a

  Try a scan now and let me know how make you out!

  Good luck!

• HP deskjet f4140 prints in Vista, but the pages are distorted

  I am trying to print a document with a HP Deskjet F4140 printer, but the page is distorted.  Can I do to solve this problem?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• printer appears offline, but the connections are correct usb to computer

  tried to troubleshoot but printer always show offline

  Hi aelshershaby,

  1. When was the last time it was working fine?
  2. You are able to print using the printer?
  3. What is the number and model of the printer?
  4. Did you the latest changes on the computer?

  Method 1

  Check and make sure that this printer is not set offline.

  (a) open the start menu and click on the "printers and faxes". This will open a window with a list of the printers currently installed on your computer.

  (b) double-click the icon of the printer that you want to change online. It will open a pop-up window describing all current print jobs.

  (c) go to "Printer" in the menu bar of the pop-up window and uncheck "Use printer offline." This action will change the printer from offline to online mode.

  Method 2

  If the previous step fails and then run the tool fixit available in the link below and check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All-in-one printer, HP Photosmart 7510 does not recognize my computer as part of the network.

  Range of all-in-one printers, HP Photosmart 7510

  The function scan of my 7510 new does not recognize my computer as part of the network. (He said that the scanner can not find the computer)   It prints fine from the computer, however.  HP ran diagnostics and cannot find the problem in their system.  Suggested that I try to find a solution to the millisecond.  I was unable to find a solution yet.  Can anyone help?

  Hello

  I suggest try to connect your printer to the computer and check if the scanner works.

• I have a black screen after start up, but the mouse behaves normally. What's wrong?

  Hi, today I turned on my Pavilion DV9500t off for an hour. It would normally start Windows 7 64-bit (the Welcome screen was during more than usual), but instead of going to my office, the screen went black with the cursor has normally and only flashes do not. No keyboard function works well.

  I started from the install disc and from there I fixed start-up (no problem found) and restored to the previous points several times without success.

  There is no error message and I have not noticed a strange behaviour, with a view to this. Any suggestions as to the cause and the cure are greatly appreciated.

  I suggest you reboot your device and pressing F10 to enter the BIOS. While in the BIOS, I ran the disk hard self test in the diagnostics tab and see what the results are.