HP laptop: recovery disk boots, but no mouse cursor to select the options.

Similar Questions

• My mother G56 laptop is not booting - HELP - get a cursor blinking in the top middle of the screen!

  Laptop of my mother with all his important files on it is not start.  As soon as it turns on, it basically goes to a black screen with a cursor flashing at the top.  I tried the instructions here to use the windows recovery image to join the reactive BACK and run the commands provided in fixboot back... but they do not work.  The computer is a laptop Nr G56-125 only about a year, the operating system is Windows 7 Premium 64-bit.  I tried also to restore system but get the same when put on

  Hello:

  You tried to access the recovery from the repair CD image you did and it did not work?

  If you can not get anything to work, then I of workaround that you can use to get W7 back there.

  If you let just install without delete and format the drive when Windows installs, it will create a windows.old folder and you can get the files from your mother from the windows.old folder.  Also in the windows.old folder, there should be a SWSetup folder. That the folder contains the major part of the program and the installation files of the driver that came with the PC.  Copy this folder off the coast for more security and use it to reinstall all the programs supplied with the PC that you want to get back out there.

  Here is the workaround...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596

• Satellite L775D-10W - stucks Boot: black screen + mouse cursor visible

  Dear supporters,

  Model: Satellite L775D-10W
  Operating system: Win7 64 bit
  Problem: The procedure start STRP stuck after "Windows load data" and a progress undertitled with 'Microsoft Corporation' bar, resulting a black screen and a mobile mouse cursor.

  The same problem occurs every time...
  pressing F8 > options (safe vaissaille mode) > start gets stuck
  Boot from DVD of Win7 64 bit > startup gets stuck
  Boot from DVD of Win7 64 bit > options > start gets stuck

  It is likely that the graphics card is broken or that the driver no longer appropriate?

  Thank you for your time in advance!

  Greetings

  Carpet

  Graphics card problem may be possible but in this case the POST (power on self test) would not be passed, and in my opinion, it is not possible to access the BIOS.

  However, it's just a theory
  Try to start Notepad using some Live CD like Linux

  I would also recommend to start the advanced boot menu. (by pressing F8) and choose repair my computer option.
  Then select Toshiba HDD recovery

  This option would be to recover the laptop back to factory settings.

• I don't have a system recovery disk. I don't want to lose the data stored on my hard drive. The computer is running in SafeMode only. Need suggestions?

  It is a HP touchscreen computer.  It runs on Vista Home Premium.  It is about 3 years old.

  Hello

  you use a flash drive or an external hard drive to copy your data

  you plug a flash drive, etc. - to data you want to save - right-click on it - send the USB stick, etc.

  _________________________________________________________________

  and read this also:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

  ______________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  for HP, you press F11 at startup

  You should have the choice of a destructive or non-destructive restore

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• NB100 - mouse cursor flies around the screen

  Hello

  So, I bought the NB100 and noticed that something was not right but stupidly put upward with her for over 2 years. Now he is just really annoying as its happens more frequently and, possibly, gets worse!

  Randomly, the mouse cursor flies around the screen, by clicking at the opening programs and files, etc. The only way to stop it is to turn off the laptop holding down the power button. She also does when I plug in a usb mouse (and disable the touchpad) so I assume that it is not the hardware, but I have reinstalled as the driver...

  Usually, if I turn the laptop on its always crazy but if I start it in safe mode its fine. This made me think I had a virus but I did a scan and nothing shows.

  In addition, I don't think that turn it off by holding the power button down is very good for the system that sometimes, when I try to turn it back on, it doesn't load at all (just a black screen with the cursor).

  Help, please! I would be eternally grateful...

  Thanks in advance, Nadia

  need you pretty much time to fix. My advice is to reinstall Windows from disk image or hard drive recovery. Please, understand me, it's easier and quicker to reinstall rather try to fix it.

• My mouse cursor disappears behind the image, I work with!

  While I was working on an image in Photoshop, my mouse cursor disappeared. No line of sight (I already tried to turn the caps lock). He had just disappeared. I was moving my mouse and it appears each time I chose a new tool or when I work with layers or when I use something in the drop-down menu, the mouse is there when I did open in Photoshop - just at the moment where I have the program open - but whenever I start to work on an image or a blank canvas disappears that's going under canvas (I found that I can still draw and erase on the canvas, I can just say where because the cursor has gone). It's frustrating because I use Photoshop to create my digital work and my drawing pad is small, so I need to know where my cursor to shoot accurately.

  (I use Photoshop CS6 and I use it on HP EliteBook with Windows 8)

  Things I did to solve the problem so far: I downloaded the current update of Adobe, I tried to adjust my settings to properties on my computer, I tried to adjust my cursor settings in my preferences, I tried to reset my presets - thinking I might have Miss clicked on a key combination to achieve - I also tried closing and go into Photoshop, even turned off my computer , let rest and then back on. But my mouse cursor continues to disappear under the canvas.

  I intend uninstalling and then reinstalling my software Photoshop - I hope it works. Otherwise, if it is not, someone knows how to fix this?

  Post edited by: Nelson Keely

  Okay, so I figured this out how to solve this problem, a few days after the publication of my question. If you have the Nezumi Pro plugin for your Photoshop there is an option in settings of Nezumi to hide your cursor which can be easily activated by Miss simply by clicking F6. Once I understood this and changed my cursor back to normal settings, my mouse reappeared.

• The mouse cursor disappears on the address and search bars.

  In Firefox 10, the mouse cursor disappears from the address bar or the search bar after a certain time, or I guess that after visiting a site that I paste below. I don't see what part of the word I click on the address bar or the search bar for the correction because there is no mouse cursor. After clicking on tools and options cancel, the mouse cursor appears (I make no changes to the options) or when I click on customize in the navigation bar, then the icons I click on Cancel again without modification, and the mouse cursor appears again (as you can understand some trigger for windows option implementation even without change is done). I uninstalled firefox 10 just for this reason. Back to Firefox 9. Safe mode - same problem happens. So no problem addon. And the same thing happened in another operating system, so this isn't a fault of a facility.

  Problem solved for me in the last version of firefox v.10.0.1

• I bought the pack, but it does not give me the option to download the full version. Just the thr trial

  I bought the pack, but it does not give me the option to download the full version. Just the trial thr. Why?

  If these solutions do not work, please contact our staff of support directly by following this link: contact Adobe customer service.

  For more information, please visit: FAQ: how to contact Adobe for support?

• Satellite L850-161 won't recovery disk boot

  When I got the laptop in 2012 I created 4 recovery disks, but since I had my HARD drive replaced in my SATELLITE L850-161 there the partition recovery with nothing in it, but the laptop won't boot no drive either so I can format it but really need, any suggestions?

  If you have 4 recovery disks be sure that start you the installation with disc number 1. After Exchange HARD drive, you should be able to use created of the recovery disks for recovery image installation.

  Another bootable disk starts correctly?

  To be honest I don t understand how new HDDD holds a recovery partition that will be created if recovery image installation works.

  Problem is that in such a situation you don t have a lot of options. In the worst case you can order the original disc of recovery for your machine.

• Use of with Qosmio laptop recovery disk

  I had someone reinstall WXP without the recovery disk and Qosmio engine that I don't have them. Now miss me things like Bluetooth, the manual for the laptop, as well as other applications, and others.

  Toshiba sent me replacement discs. Now I have them. I need to do a reformat-re-install all the windows system to recover my old computer? I downloaded the manual tonight but I n t think he responds to this situation that I can remember. Nothing on the poles or the other.

  Someone at - he do it before?
  Thank you

  Stand by! What you want to do exactly? You want to have once again the factory settings or just install missing stuff?

  What CD/DVD, you have now?

• How can I buy the UK for HP G62 - B50SA laptop recovery disks

  I replaced the hard drive and all tests OK, but "no boot device" error using my own recovery disks. I can't find how to purchase on the HP website.
  I live in the United Kingdom. The MODEL name is: HP G62 - B50SA NOTEBOOK PC. MODEL no is: XF287EA #ABU
  How can I buy HP RECOVERY DISCS for WINDOWS 7 64 bit... Please... I need my PC to recover

  Hi there @Juddingston,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions.

  Here's a link if your page of the driver HP G62 B50SA. If you scroll down you will see where it says "order recovery media". This should already be set to the United Kingdom. Please follow the instructions to order the recovery media.

  If this does not please use the following link to create yourself a file number, and then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  I hope this helps!

  Have a great day!

• Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

  I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

  You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

  You start with a chkdsk/r from the XP Recovery Console.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Why my laptop refuses to boot with keyboard/mouse wireless attached?

  HP Pavilion Notebook dv9830us. A few years ago, this laptop got pushed around when configuring updates. In the end, had to use to get it running and it was never completely right since. I noticed one thing, it is that I now have a start button extra stacked on top on the original. Is this because I did a cover?

  Hi Brenda9995,
  
  It is possible that during the recovery of something glitched, that may have caused that. Just make a recovery but wouldn't. It's probably more in a relationship when the laptop has been disturbed.
  
  As it appears you have the problem you mentioned, and possibly others, you can try to contact support to see if they can help you with this.
  
  Technical support of HP, 1-800-474-6836 in North America. For all other regions click here.
  
  Thanks for posting on the HP Forums.

• HP Pavilion 15 laptop: want to buy the to my computer HP PAVILION 15 LAPTOP recovery disk

  My laptop has the stoppage of work yesterday after using the recovery disk created from my Hp laptop which gives the reasons below.
  Failure of the control of BurnBoot of P2PP
  Possible causes: -.
  1.Yello - bang was held at the device
  2. some failed installation in silent mode
  3 Found failed to PININST_BBV
  4 Found failed to PININST_BBV2
  5 found memory dump file.
  Suggestion: -.
  BB 1.checking - REGDEV. The pilot NEWSPAPER
  2.cheking - BB Apps. Application log
  3. check MEMDUMP_BBV. Journal of memory dump files.
  Note {for ODM}: -.
  If you know which component failed in the process of prenistall after checking above files please OTS it to the owner of the component.
  Furthermore, suggestions for contact TWN PDC NB-PreinPM or create PIN-Log and OTS with OTS category Image.
  [Checking the register device]
  Result-failed
  Device failed #0: -.
  Description:-Bluetooth controller
  PNP device ID:-PCI\VEN_FF42 & DEV_8650 & SUBSYS_00000000 & REV_00\4 & E572C4B & 0 & 01E2

  Hi @anupom,

  Welcome to the HP Forums!

  If I understand your messages that you encounter a problem with your HP Pavilion Notebook of 15 and problems related to lack of CD recovery.  Here is something that might help.

  Are there problems with your yellow exclamation Device Manager showing in it?

  Did you change hardware on the laptop?

  Note Remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Please get back to me how that happens.

  Click the thumbs below to thank me for my efforts!

  Thank you.