HP LaserJet 1320 base owners/owner's manual supplied with the printer

Similar Questions

• I try to install the inverter forza and why the system prohibits the password supplied with the instruction manual

  I bought a series of Forza Ups SL761. It came with a manual and I am trying to install it via the website and the system asks me the password. When I fill the password supplied with the manual there show me that the password is not correct. And I can't go any further.

  Hi Henry,.

  I suggest you to contact Forza Power Technology Support: http://www.forzaups.com/us/contacts/

  You can also post this question in the Forza community: http://www.forzaups.com/us/blog/category/english/

  Additional information.

  Forza SL761 Ups series: http://www.forzaups.com/us/products/ups/sl-series/forza-smart-ups-sl-761110v#features

  Thank you.

• HP Laserjet MFP M175nw: New router just won't recognize the printer - Laserjet MFP M175nw

  Hi all.

  It's probably a little deeper than a problem of means.

  My printer above works fine on my 2 other routers modems, even now.

  I got a new modem / router from Telstra, Technicolor TG797n v3 model.

  A number of home devices works fine with this, including computers, phones and ipads, AND EVEN an ANOTHER PRINTER HP (Laserjet CP1025nw).

  However, it simply will not recognize the MFP M175nw. I tried so many ways, restarts and redefinitions, plant a certain number of times. Tried of WPS WPS PIN code wit and EVEN directly connect to the router with a Ethernet cable. -Do anything, router simply does not see the printer.

  I even did an update of the firmware on the printer. Still not good.

  I even downloaded and run the HP print and Scan Doctor - even this program cannot find this printer.

  Any help would be greatly appreciated.

  Thank you.

  -Fauzer.

  Hi, congratulations for the suggestion. As it is a House that is put in place, the budget is a consideration.

  My linksys WAG325n is still in good condition and managed all of the printers and devices witout a problem.

  I'll try to do my gateway Tehcnicolor a pure way and the linksys router.

  I don't know exactly how to do right now, but I'll have a go, if you have any indication at the same time, please share.

  Thanks heaps.

  -Fauzer.

• printing with ultiboard 10.0 does not work with the printer hp laserjet 4

  I try to print my design ultiboard 10.0, but I get a blank page every time.

  It is a network HP LaserJet 4 Plus printer, an another printer HP LaserJet P3005 PCL 6 work perfect, but is not installed in my office.

  Word, Multisim etc.print without problem with the HP LaserJet 4 Plus.

  Change the DPI does not solve the problem.

  I found http://forums.ni.com/ni/board/message?board.id=370&message.id=1378&query.id=1278884#M1378

  But it doesn't give all the answers to the problem.

  Solved using the lj631du driver.

• HP Laserjet Pro M451dn: Problem on a computer with the printer fonts

  Hello

  We have three computers that seem to be running the same configuration.  The problem occurs with Microsoft Publisher as follows:

  -On both computers, when specific documents are called, they work fine and fine print

  -A computer, when particular documents are called, we get the error: "load fonts - information on the police below shows what fonts are embedded in your publication or are unavailable - Goudy/unknown/not available & Goudy ExraBold/unknown/not available."

  I checked all computers and confirmed that the same TTF are installed, even to copy fonts goudy from one computer to another to ensure that they are the same.

  When I go into one of the computers that work and look at the "commercial fonts" section in Microsoft Publisher, it tells me that:

  Police = Goudy

  font type = printer

  Police source = system

  Police = Goudy ExtraBold

  font type = printer

  police source = system

  I tried to install the latest drivers for the M451dn of Laserjet Pro, but the fonts are not yet available. I have no idea on how printer vs TTF fonts. If it were an FTT, I would simply copy, but I don't know how to fix this computer to access the printer fonts.  Any help will be greatly appreciated.

  Thank you

  Jeff

  > fonts, I'm looking are listed as "Additional PS emulation fonts" for a different model printer.  When a non-PS driver is used, the driver can always access these fonts...

  I don't know for certain, but I guess these "Fonts additional PS emulation" can probably be used only if you are using a PostScript printer driver.

  If you use a printer PCL5 or PCL6 (PCL XL) driver, then these policies probably are not accessible.

  EDIT: I found an online source for one of these PS_12542.ttf (= Goudy) fonts, and it doesn't seem to be a valid TrueType font that (in theory) can probably be used by other pilots.

  But this policy has a "limited" license, which means that it cannot be incorporated in the documents:

  

  It is possible (probable?-I don't know) that support routines and standard printer drivers that you cannot use this policy as a "source" for temporary downloaded fonts "smoothly."

• LaserJet professional M1217 nf: cannot scan over network with a printer laserjet 1217 on a Mac

  Hello

  My set up:

  Mac with Yosemite

  LaserJet M1217 more wireless

  Description of the problem:

  I can't scan. Preview, the control panel or image capture, I get the same error saying "cannot open a session.

  I have installed and reinstalled the drivers/printer about 100 times.

  I tried to add the printer/scanner like airprint, or with the name of the printer as a proposed post.

  Just what causes the same error.

  I have the 2.0 version of the driver installed right now. Tried with 1.7, same result.

  I can print without problem since my Mac and my iPad.

  Tried it with an ethernet cable and have the same problem in case someone ask.

  I looked all over google and doesn't seem like someone else has the same problem? Many people have problems printing over wireless, but it's ok for me. Is the scan, I can't go to work.

  Pages of HP does not offer any other driver which has of the Yosemite. HP offers no additional program for Mac and scan.

  Don't know what else to try.

  Little help? Anyone?

  Thanks Geminy02,

  Unfortunately, your suggestions did not help, and I have a few comments about them.
  First of all, your suggestion about the router was the problem is quite impossible, as you will need to check if the ports are open only in the case we're talking about two different network segments. If you have your printer and your computer in the same segment you will have problems of ports.
  Second: if I would have chosen IP protocol to add my printer, I wouldn't take the option scan, as you said, which means I could not done any tests that I mentioned in my original post, and I would never have had to the point of getting the error message.
  Thirdly: the drivers that you MENTION for download are exactly the same as you get with yosemite, so, this could help to reinstall the driver, it's kind of a long shot (and yes I tried).

  In fact, I managed to solve my problem by doing a factory reset of the printer, any sign of a printer in my computer, cleaning and reinstall the printer using the airprint driver suggested by yosemite where to find my bounjur printer.

  I tried ro think what could be the reason, or to see all what I had changed, and the only thing I've seen different in the configuration before and after he started to work was the name of the printer. When it did not work my printer was called simply "printer", when he was working he was the full name that comes by default. It would be very strange, that this is the reason, but I just mention it here just in case someone read. I believe that the factory reset was the difficulty, not the configuration itself.

  Just for the other readers, I can confirm that this unit can print and scan over my wiresless and cable network on yosemite, with the help of preview, capture image or scan property in the control panel. It took me several hours to make it work, but it does, and my best friend was all the time the printers web page, where you can change the configuration of the printer.

• LaserJet p3015: print with the printer driver universal pcl 5 of Collator

  We use the universal PCL 5 driver for printing on a Windows 2008 R2 file and server to our printers laserjet printing network.  Our enterprise application doesn't have a way to bring together several pages together, so this will be done by the printer driver and settings.  However, I don't see an option to collect pages in the printer settings.  Is this possible with the PCL 5 UPD or it will need to be upgraded to achieve?

  As I mentioned in my previous answer, most small LaserJet printers will not print collate.

  They will just print a copy, or (as your symptoms seem to suggest) just ignore the Collate setting.

  This is because the true ranking of multiple copy requires the use of Mopier Mode, which in turn requires the availability of a hard disk of the printer - printers in most small do not have a mounted hard drive.

  To get the same effect as the standings, drivers for these printers will send multiple copies of the print job in the same connection.

  But they do if the driver configuration indicates that Mopier Mode is activated, so you must ensure that the configuration shows that it is disabled.

  

• vosto del does not work with the printer hp laserjet 1018

  Dell Vosto will not work with HP LaserJet 1018, work group, that don't know what that means.

  Unfortunately, this community is able to provide support in English only. The following URL will help ensure that you receive support appropriate for your location information. Select your region from the drop-down list, and then click the arrow button.
  http://support.Microsoft.com/common/international.aspx
   
  Have a great day and thank you for your visit.

• Office 2007 security updates do not settle on XP SP3. Manual installation with the user account via the Web site to download works. But when the same file is launched via a regular command prompt, it fails again.

  When the update is installed manually it can also not be removed from the "Add/Remove Programs" dialog box (as here again the system seems to start the real uninstall process)

  Windowsupdate.log error code example:
  First failure for update {D12D15B0-9568-415B-8D2D-4CBF40B93C84}, transaction error = 08024200 × b, result MSI = 0 x 80070643, MSI action is CostFinalize

  We have this problem on about 10 machines XP (of 300)

  We tried things:
  Attach it to MS
  Office relocation
  DARE related things
  Chkdsk /r
  and much more...
  (everything we could find on similar problems)

  Hey Wallstand,

  Thanks for posting in Microsoft Answers.

  This forum is for consumers to related issues. This seems to be a problem with Windows Update in a work environment. Therefore, it will be more suitable in the Microsoft TechNet Forums. Please visit the link below to find a community that will provide the support you want.

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope you find the resolution as soon as possible.

  Nice day.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• HP LaserJet M425dn MFP 400: Evolution of internal fonts in the printer configuration causes sporadic "error 49:0699".

  Hello, we had the following problem since we have put some of these models into production (3 in total and it happens to all 3 printers)

  We have an old program that sends print jobs to printers directly. It uses the internal settings of the printer to its police. Police 84 is the same font used on the old printers, so we have set up the default font for printers to 84 (they come with 23 configured by default on the page of Print, PCL5 parameters, policy number, in the web configuration of the printer).

  What we found is that if the police is 84, the printers will be sporadically throughout the day with the error error code 49.0699 and restart the computer, and then work fine for a while.  The strange thing is this isn't just error on printing, it will do this by making a copy or a fax or even try to print a report of service.

  When we initially troubleshoot-carried out the problem, we followed all the normal stages:

  Before each of these steps, we ensure no print jobs are waiting or begin to be sent to the printer.

  1:clear NVRAM

  2: Firmware update

  3: update driver

  4: change IP address

  5: remove from the network and connect via USB directly to the workstation

  6: replace formatter Board

  7:repeat steps 1-6.

  It wasn't until we changed the printer entirely with a brand new and have experienced the same problem that we understood it was change the internal fonts that seem to cause the problem. If we let the police as 23, printers have no error throughout the day, or on the print or fax or transcription.

  Any ideas on how to solve this problem?

  Just in case someone runs into this post with the same problem, the latest firmware available for this printer (09/12/2015 when the post) has solved our problem.

• Printers HP Laserjet Pro M1130/M1210 MFP series will work with the universal PCL5 driver?

  I have this model in network and it works very well with the driver in case of Windows host-based (Server 2003). I have an ERP that needs the printer to use a PCL5 driver. If I try to print anything using the PCL5 it will not print a Windows test page, although if I stop print I see work in the print queue. When I take the break on the slopes of work and for all purposes useful, looks like it has been sent to the printer, but the page is not printed.

  Anyone tried this before?

  Thanks for your help!

  Thanks for your quick response! That clears up that then!

  Thanks again.

• LaserJet pro m401dne: fatal error, takes too long to connect with the printer

  Downloaded the driver of HP software, started installation and got to the point where it says to connect the printer, did, he recognizes it, start the data transfer and just takes forever. After ten minutes, I get fatal error takes too long to communicate with the printer, if aging persists restart the computer and try again.

  I've made this 3 times now and same result.

  Since my laptop doesn't have a cd drive, I copied the cd to a flash drive and installed the software from that. Worked perfectly. Something must be missing or corrupted download. Anyway problem solved

• Missing owner's manual

  Printer came up with a quick set up guide, but not how to simple things like how to copy, scan or change settings. I pressed the numbers as I on a normal copier to copy how much I wanted to, but nothing happened. I tried scanning by using the same method that I did for my old version of HP, but that no longer works. In addition, by accident, the language has been changed and I could not find information on how to revert to English. Help! Technology is wonderful, but I need to know how to make it work!

  Hello

  To save the trees and the Earth, sellers are now not printed manuals. The manuals should be on the CD supplied with the printer. You can download from the following link (there are 3 manuals/guides):

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=5191646

  Kind regards.

• HP LaserJet 1320 printer driver

  Can I use a HP 1320 LaserJer printer on a Dell with Windows 7 laptop? It seems that I could download the software, but the cord I have does not work with the laptop.

  J.-x., welcome to the forum.

  We have a problem dealing with other brands of laptops.  We have the features for them.  You will need to determine what type of connectors for your laptop is available and buy a cable that is compatible with the printer and the laptop.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• LaserJet Pro 400 M451dn: Problems copying documents from the printer scanner

  I use a Mark II of Canon Canoscan 9000F scanner to scan documents and copy them into the HP LaserJet Pro 400 451dn color laser printer.  I use the 'Copy' button on the front of the scanner function.  When a color or photo document is scanned this way the red and blue colors are reversed when it comes to the printer off.

  Both the scanner and the printer work perfectly in all other situations.

  Somehow the red and blue colors are to be swapped when a document goes to the scanner to the printer.

  I called the Support Canon technique and they told me that they have never heard of this problem and have never had it reported before.  When you use the "Copy" button function there is no setting that can be done. The scanner copy what he sees.

  So why the red and blue are exchanged on the printer?

  Teknishun

  What happens if you scan the document itself to the computer and then print the scanned copy? If it is ok, then the question must be the scanner software which sends the document to the printer and has nothing to do with the printer. Sorry, but it's a hot issue.