HP Mini 210 factory recovery - not a HP Recovery Option?

Similar Questions

• HP Mini 210-2080ee recovery media

  Asked me to retrieve a defective HP Mini 210-2080ee with a hard drive.

  I can't source a recovery DVD or USB because the machine was bought in the Middle East and media are not available in Ireland or the United Kingdom.

  Any suggestions welcome

  USB with all the necessary software from Czech Republic delivered by DHL on Wednesday.  Thank you very much for your quick response.

  System in place and works perfectly

• HP Mini 210-1094NR recovery

  Hello, I need help now.

  Trying to fix a HP Mini 210-1094NR running Windows 7 Starter.  Boots to the Windows error recovery screen that gives me two options.

  1. run the Startup Repair tool

  2 start Windows normally

  Well you can guess which do not work.

  The repair option is stuck in a loop, the hard drive light flashes once every 3 seconds.   For more than 36 hours left and he said he was repairing.

  So it is hammered.  Y does it have to access a recovery partition?   I have the manual and it says to press F11 or the window button to access a possible recovery partition.  However, these just bring me to the recovery screen with the same options that do not work.

  Any help for this device?

  Thank you.

  More data.

  Consulted with Diagnostics and run the hard drive test.    2% complete... Message says "replace disk 1" hard. "

  Complete test 0% complete... 'Replace the hard drive.

  Smart control... "HDD SMART past.

  Looks like I got a bad disc.  I should know.  It's 28 years.

• HP Mini 210 - no recovery disk

  Hi all

  Hope someone can advise what to do.  I bought two HP Mini 210.  I did not the recovery disks.  The hard drive on one of the netbooks failed and I got a new installed.

  I made a recovery disk on USB of the other netbook to work hoping that I would be able to use it to restore the operating system using the license key from one failed, but when it boots off the coast of the USB it says is an incompatibility or something and leaves me not to continue.

  Does anyone know of a way around this please?  If there isn't one, can anyone tell what is the best step forward?

  Thanks in advance

  Hello

  You have a few options as I see it you can call order and technical support HP disc or click on the link given below to order the drive yourself.

  Order of the recovery disc for Windows 7, Vista or XP

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• HP Mini 210-1170NR will not post

  my HP Mini 210-1170NR netbook is no longer valid.

  the battery seems to have expired, but it worked for a week or so plugged into the wall.

  now, when I turn it on, the power light turns on, turns on the caps lock, but nothing except a HDD occasional light twinkle works. doesn't appear on the screen, nothing seems to activate (i., flickering e., backlight setting, etc.).

  I tried to connect via SATA desktop HARD drive and the hard drive works.

  are there steps I can take to fix, or will it take to replace it?

  Hello
  
  Unfortunately, it seems that you need to replace the mini can.
  
  You can try to contact support to see what options they have for you.
  
  Technical support of HP, 1-800-474-6836 in North America. For all other regions click here.

• Mini 210-2000 can not recover the system

  Hi, I have a 210-2000 mini hp, I did a system restore and the system crashed. I have no recovery discs and I'm stuck with what I need to do to reset the op sys, can u inbox very much my email with any help rec, im ped. He will go to the safe mode option but does not successfully start, all continuous loop again and again, many thnx, chinboy

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  You can also publish returns with the following details.

  1. the full model number and your laptop Nr series 210-2000 of Mini - see here for a guide to the location of this information or the list here.

  2 the full version of the operating system that you use (IE Windows 7 64-bit).

  Kind regards

  DP - K

• HP Mini 210-2070NR does not illuminate

  The computer was running and makes a funny noise - perhaps the disk is going bad?

  I watch yet, but when I looked, it was off and the led 'works '.

  has been turned off, and the computer does not illuminate.

  How can I determine if the drive is bad and if so, how to replace the drive (and the operating system 7)?

  Any other ideas why it doesn't turn?

  Hello RayVoith,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop does not light, and I'd be happy to help you in this case!

  To turn on your computer again, I recommend the rest of this paper on computer won't start (Windows 7, Vista, XP). This should help to turn on the laptop.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• mini 210-1142cl RAM update

  question, is possible to upgrade RAM with a MHz higher than the computer can handle, 1333 MHz > 667 MHz?

  If so, how?

  I want to upgrade my RAM to the mini 210-1142cl from 1 GB to 2 GB,

  According to the manual, the mini can accept an upgrade to 2 GB, but it must be:

  2GB PC3 - 10600, DDR3-667 MHz, 204 pins sodimm

  Centon 2 GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm, tigerdirect, slightly cheaper.

  and now he has a black screen, and I can't start with F2, F8 or F10.

  What I did:

  1. update the BIOS to F24
  2. upgrade to Windows 7 Ultimate 64 bit, the Intel ATOM chip is 64-bit
  3. went to crucial.com for scanning of memory, and it is guaranteed to work:

  2GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm

  Is it possible to make the 1333 MHz running on the cl 210-1142 mini?

  Yes, it is possible to improve from 1 GB to 2 GB

  Thank you

  I went to centon dot com, the hp mini 210-1142cl is not on their list of supported computers.

  However, I just got a Centon support respoonse and said that part # is compatible to->

  Centon CMP1333S02048.02

  also confirmed crucial RAM

  CT1440459 part number

  Material CT25664BC1339.8FMR

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• Recovery HP Mini 210 problem

  It started to have this type of quick web error and wireless Assistant.

  I decided to reinstall the Recovery Manager software. But the problem is

  After installing the software, he asked to restart the computer. That's why I allowed him to restart,

  but now it comes with a "installation is not complete. Press a key to reboot and

  then use the Setup program to repair the installation. "And this screen appears before the windows

  startup

  Now what's happening is that press each time a button to restart, it goes back to the same screen with the

  above the words. And I can't get into windows, nor the recovery page.

  I have no idea what so ever where the installation program is. and I can't go back to the window to do a full restore.

  can someone help me?

  model HP Mini 210 - 1146TU PC

  Do as he suggests. apparently the application was not installed correctly.

  "Press any key to restart and then use Setup to repair installation"

  You can join the Recovery Manager by tapping F11 continuously at the beginning of a reboot.

• Factory recovery Toshiba does not lack of partition

  Hello

  Notebook PC no longer starts. When you insert a dvd - w8 to a fabrieksherstel (ex-factory) I get this message.

  + Fabrieksherstel kan niet worden uitgevoerd. Een vereiste stationspartitie Land. +

  + Resumption of the factory does not work. A required partition of a station is missing. +

  Can someone help me what to do please?

  You said that you have inserted Win 8 DVD to do a cover of the plant.

  You use the Microsoft Windows 8 DVD or do you use the Toshiba Recovery DVD 8?

  I put t know which model of laptop you have, but on newer models preinstalled with Win 8 some configuration changes are needed in order to boot from the disc.

  In the BIOS, you must disable secure boot and have switch to MSC mode

  Your comments would be appreciated

• HP mini 210-1170NR: not found network controller driver...

  up to what a week ago I was still able to connect to the internet via a wireless connection... so when my friend formated my laptop I could not connect wireless but I can always connect cable... then I tried my laptop what was wrong then I discovered that he was missing the network controller driver...

  What should I do?

  Hello

  The following link has all the requried drivers for your laptop, including wifi drivers, find out wat wireless card is installed on the device, install the respective drivers.

  http://support.HP.com/us-en/drivers/selfservice/HP-mini-210-PC-series/4151684/model/4221571#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Mini 210-1014ea: Wifi does not not on HP MINI 210-1014ea

  So I've upgraded to windows 8 last year, it was quick but then day after day, it became slow. This laptop has 2 GB of ram and a 64-bit, Intel atom N450 processor. Given that windows 8 has been slow, I have dedcided to install windows 7. So after that I installed, all drivers worked very well EXCEPT FOR MY CONNECTION WIFI. After more than a week of fighting, I tried to update my drivers and do a lot of things. But my wifi it says "no connection available. Ethernet only works. Well, I installed the latest updates in Windows update. Right now I have the latest Broadcom 802. 11 b / g network driver. Version 5.100.xxxx. I tried to uninstall the driver from Device Manager, but even then I can't search for networks wifi, infact it doesn't show all the wifi networks.

  @jass007 ,

  Hello and thanks for the display on the HP support forums.  A question when you did your installation of Windows 7, so that installing your drivers that you start first of all with the Chipset Driver.

  The reason for this, it's a bit like a traffic COP for all the other drivers on the system.  I've seen this cause of conflict with common devices and even up to the point where they are not even appear in the Device Manager.

  If you can make sure that you back up all data.

  Once this is done go to the systems support page and download all the software and drivers and save it on a USB key.

  HP Mini 210 - 1014EA PC - software & drivers

  Once it's done Windows Safe Mode startup.

  Enter SafeMode (Windows 7)

  Once you're in safe mode, that you want to remove all your drivers.  You may need to uninstall one at a time and restart between uninstalls.  Don't forget to start mode without fail every time.

  When all the drivers have been removed.  Start Windows again normally. Here, you will need to install the drivers one at a time.  Be sure to start with the Chipset Driver first.

  Please let me know how it goes for you.

  Thak you again for the display and have a great day.

• HP Mini 210-2002sa laptop: System Recovery

  Product name: HP Mini 210-2002sa laptop computer model #: XD396EA

  OS: Windows 7 starter edition

   

  Should I for Microsoft Windows 7 starter product key to perform a system recovery?

  If Yes, where can I get it? The only thing I have is the OEM product ID.

  Hello

  As long as you do the system recovery from the hard disk recovery partition (or from the recovery media, you created when the laptop was purchased), activation will happen automatically via the license of software on your bios chip and a certificate of security built into the operating system - you won't need to enter something.

  Kind regards

  DP - K

• HP Mini 210 - 1084TU empty is displayed and does not start F10 F2 doensnt work

  When I turn on my HP Mini 210 - 1084TU food cover shows caps lock shift light is solid and the button not fuction - the screen appears blank and not push further.

  What I tried was:

  1 hard reset - 3 times

  2. by pressing f10 or f2 or f11 on power but nothing happens

  Please, guide...

  Found the solution...

  removed the battery cover and just removed the RAM... rubbed with the square of the Eraser again and removed the battery inside waited some time and place it again... and the system is reset... it works... all my data is safe!