HP Officejet 4620 prints black only moroccoin pink

Similar Questions

• OfficeJet 4620: printer keeps going offline

  OfficeJet 4620 - printer keeps going offline.  If I turn it on and turn it on, it's online for a while, but it disconnects again.  My IPad can't print on it. My Windows laptop, 10 shows as offline.  I can open his web page by entering the IP address in a browser and can ping it, but it also shows offline.  It is very annoying to have to reset the printer whenever I want to print to it wireless.  Is this to say that the wireless antenna is going wrong?  Should I buy a new printer?

  I found what caused my problem when troubleshooting the installation of a new printer. I have 2 range Extenders. They had the same ssid as my router. One of the reports of tests of the new printer had a warning about it. I changed the range extenders in order to have all 3 different SSID. Now when the ipad & printer are that both connected using the ssid for the range extender in the room with the printer, there is no problem of ipad impression. My old printer is fine.

• Do my HP OfficeJet 4620 print in black ink only, permanently.

  I want my printer to always print in black only, on the quality of the project. I went to devices and printers > Printing Options > advanced and changed printing in grayscale only for "black ink". I also made the same change on the page I want to print and go CTRL + P > properties > advanced and making the same changes.

  However, my printer automatically returns to print in color after only a single document i.e. whenever I print a new document, the changes are cancelled and it is up to the color.

  It's much too much time to repeatedly change the settings everytime I have print something, I need to print about 70 separate documents every morning! How to make this change permanent?

  I use Windows 8 if that helps.

  Thank you!

  Hello MarkC-S,

  Welcome to the HP forums!

  I understand that you tried to change the printing parameters for "Black ink" only, but it is up to color ink. As you said, the print settings seem correct and it should stick permanently. How is the printer connected? USB or wireless? I recommend you to uninstall the software.

  Please follow this HP document uninstall programs and features.

  Then clean your Temp folder on your computer:

  1. On the keyboard, press the Windows key and the 'R' key, and then type %temp%. Press ENTER.
  2. Press 'Ctrl' and 'A '. This will highlight all. Right click on your mouse and select delete

  Now, install the full features on the site of HP software here. Choose your operating system that is appropriate; 32-bit or 64-bit. If you need help to install the software, please follow this HP document here. Choose your correct connection type.

  Once the installation is complete, please let me know if the 'black ink printing"stick this time!

• OfficeJet 6500 E709n Wireless - sensor defective yellow cartridge - how to print black only?

  Product is 5 years.  Error message indicates that the yellow cartridge seems to be missing.  Cannot be resolved after several cleanings of sensor and the sensor window. Powered / disable several times including corkscrew. A tried a new yellow cartridge (not a recharged one used).  Shot all the cartridges, cleaned, open/closed status of the printer, lifted/lowered the gray lever of the print head.  Could not find a way to print in black only if possible.  The cost of a new printer is roughly the same Technical Support help (out of warranty).  Any thoughts on how to fix (other than buying a new printer - unless it's time)?  Thank you in advance.

  Figured it out.  I missed some parts of the print head cleaning.  Solved.

• Set Up for HP OfficeJet 4620 prints to fax only

  Try to implement OfficeJet 4620 wireless laptop running Windows 7.  Wireless set in place works.  When a document is printed, a fax page.  Document never print to the printer.  After you set up the printer name is preceded by FAX.  Have deleted the printer and re-installed several times.  Do not see possibility to do something different.  Any help appreciated.

  @GuyNameDavid, sorry that you experience this problem with setting up a default printer.

  Try uninstalling and reinstalling the software and drivers. Do you still have the CD?

• All-in-one HP Officejet 4620: printer problem

  Printer works fine with the office. When you try to print from laptop, black is faded or nonexistent. The colors are sometimes normal and sometimes faded. Are passed through the HP print and scan doctor including updated drivers and the problem still exists. It started when I replaced the black ink cartridge. HP used cartridge, not off the mark. Printer is set up with WiFi connection with a Belkin N600 router. Both computers are HP. Last screen with print and scan doctor says printer has some serious problems.

  Hi @freddie3,

  You know, even if the printer prints fine on a computer, I can't help but feel that the question has something to do with the printer itself. Let me explain; I wonder if when you print from a computer so the settings are grayscale, so 3 colors would be coming together to create a composite black.

  We will complete the recommended steps provided in the following document, this will help determine the root cause and can help to solve the printer prints a blank Page not printing black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series.

  If the problem persists, please let me know if the test pages have black ink on them or not. This will help me determine whether or not the problem is, in fact, the printer.

  Thanks, I look forward to hearing back on your part.

• OfficeJet 4620: No black ink

  I have a HP Officejet 4620 ink empty simply stop working. I went through all the downloads, troubleshooting and called customer service. Told me the reason why my black ink wouldn't print was because I haven't used my printer enough, even if the day before it stop working, it works great. I was told that I have would switch to a new printer for the low price of $140 with a 3 year warranty. I've had my printer for 2 years and spent more than $120 for it. I think that spending that much on a printer, it would last 2 years? Maybe it's the lifecycle of HP printers? Im very disappointed with HP on this issue. I was told someone else contacted me and have not heard of anyone yet.

  I just got a phone call from HP and they told me they would me shipping a printer reconditioned to replace mine. I hope it works, thanks for the help

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• OfficeJet 4500: OfficeJet 4500 print black

  Hello

  Printer does not print black. I replaced the cartriadge and even made a cartriadge of the printer cleaning, but the printer does print not always all black whatsoever.

  Any solution?

  Try these videos Youtube here.

  https://www.YouTube.com/results?search_query=OfficeJet+4500+PRINTHEAD

  Find out more if necessary.  If no joy, your printer is toast.

• My Photosmart HP 6515 does not print black only.

  Sometimes, I want to print something on the web that has the color, but if I have no color and just want black and white how can I do? I don't see anything on the control panel of the printer that allows me to do that.

  The copy on the control panel function is, I suppose, just for the copy of something you place on top of the screen glass and not to the copy on the web. Is this correct?

  Other printers (such as my old Canon printer) allows me to do black and white.

  Hello

  You can set print black ink using the settings of the printer on your Mac:

  First of all, try to click the menu presets from the print dialog box and select the preconfigured black single preset.

  If this does not appear, follow the steps below to manually create such a "Preset":

  1. from the application used to print, click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to product model (Mac OS X v10.5 or v10.6) or the button view details (Mac OS X Lion v10.7 / 10.8) see all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset.

• All-in-one Deskjet F3335 allows to print "black only" on the profile of a user, no other

  Hello

  I have an annoying problem with my all-in-one Deskjet F3335.  I print a lot of documents on my printer.  Rarely do I need to print anything in color.

  Since the acquisition of a computer running Windows 7 (x 64), I was not able to print in "grayscale: black cartridge only" on my profile; the only option is 'high quality '. (see image below)  I thought it was a systemic problem until printining something user profile on my husband.  His profile will allow for me to select "black cartridge only."
  

  I tried to uninstall and reinstall the software and updates. This did not help.

  Hoping someone out there might have a suggestion for me on how to solve this problem (and stop wasting my color ink)! Thank you

  As I understand it, you can change the printer to print in only black and white on a profile, but not on the other on the same computer. Is this correct?

  This type of question usually depends on the permissions available on each profile. I would hazard a guess that your husband is a Director or that there privleges more than your own profile. I check to make sure that your account is set up as an administrator first.

  Secondly, I would also check the 'Advanced' tab, that sometimes you can change the settings for printing color black and white or grayscale.

  Let me know!

• HP officejet 4620 printing problem

  I use a HP Officejet 4620. The software is installed on a PC using Vista. I can print to it from my Ipad, but not one of my desktops. Help, please!

  Hey accents.

  I see that you have an impression of question from your Vista PC for your Officejet 4620.  How the printer is connected to the PC?  If network, then what was the last time your electric network configuration has been cycled?

  Follow these steps to reset your printer HP, your router and your computer.

• Hp officejet 4620 printer that I need to know where is the guide to the user and how to clean ADF

  Device's printer Hp Officejet 4620, I need to know where the user guide is? How to clean the ADF?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP Officejet 4620 e-All-in-One Printer - drivers and software
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5191646&LC=en&cc=us&DLC=en&lang=en&cc=us

  E-all-in-one printer HP Officejet 4620 - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=5191646&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printer prints black only

  I use All in One C7280 and Win 7.  I used it for quite a few years.

  I replaced the Magenta Ink Cartridge and the printer screen and the computer screen says he has successfully installed and this cartridge is now full.

  However, when I click on print, I get a message on the screen saying the Partridge of magenta ink needs to be replaced and I click on 'Black Only' and 'OK '.

  So I'm forced to print in black only.

  I checked the solution Center, and all the cartridges are full.  But still, I replaced the cartridge three times.  No luck. I also turned it on and off a few times and kicked to win several times.  No chance either.

  Thank you.

  Hello kahill1918,

  Turn on/off the printer is not always clearly mistakes that the printer actually knows. I recommend you to do a reset of the printer.

  Reset the printer

  1. Press the button to turn the unit off.

• HP officejet 4620: hp officejet 4620 printer all in one

  series #CN33S210C8

  After 2 pages print, my printer stopped printing.  Then I changed my cartridge, when I tried to print again, I got blank pages.  Just installed a black cartridge genuine HP.  I cleaned the print head 2 x and still get blank pages.  Can someone help me with this problem.  Printer was purchased 7/2013 and I think I'm out of warranty.

  My printer has stopped printing - I don't get white pages.  I cleaned printer heads 3 x and aligned, but nothing works.  What do you think that the problem can be.  The printer goes through all the motions, but does not print.