HP Officejet 6700 Premium: System 6700 Premium ink or printer failure

Similar Questions

• OfficeJet 6700: Upcoming reviews and printer does not work!

  I have huge problems with my printer - Officejet 6700. It was working fine until recently, when we changed internet provider. Since then, it prints sporadically, but usually when I try to print from my laptop it retures a message "unable to communicate with the printer.

  I don't know if there is a problem with an IP address. I tried to connect with a USB cable to the printer, but my office does not detect the USB printer connection fronm. The printer does work with other laptops in the House. Any advice would be greatly appreciated!

  Hello

  Have you implemented the pritner wireless to your new router?

  From the configuration menu of the printer you select network, locate the option Reset or restore network and follow the instructions on the screen.

  Then, follow these steps to run the Wireless Setup Wizard:

  http://support.HP.com/us-en/product/HP-OfficeJet-6700-e-all-in-one-printer-series---H7/4322971/model/4323605/document/c03086294/

  Once you are finished, go to the control panel > devices and printers, click right no matter which instance of the 6700 and select Remove.

  Then, open the HP Officejet 6700 icon on your desktop or under start > all programs > HP > HP Officejet 6700 and follow the on-screen instructions to connect a new printer.

• OfficeJet Pro 8500 depleted a color ink cartridges - printer will print not except if replaced

  When one of my color ink cartridges is empty ink, my printer does not print until the ink cartridge is replaced.  Of course, I go out and buy new and install it then get the message that another cartridge needs to be replaced!

  I only print in black ink in all cases.  Is it possible to print only black ink without replacing color cartridges are empty ink?

  In addition, if a color is exhausted, I should automaticall replace all color cartridges?

  Operating system: Windows XP

  Officejet 8500 printers individual ink cartridges (IIC); This machine requires that all cartridges to be installed to ensure that the printhead not damaged. In the printer, the ink is used not only for printing, but retain the printer and the print head. We can reduce the amount of color ink, the printer uses by changing the print in grayscale settings or use black ink only. Page 34 of the Manual shows how to change these settings when you print the documents. For more information on how the ink is used in the printer; It can be considered as this page here where he goes into detail about the different ways that ink is used in the printer.
  I would just replace the color cartridge the printer says needs replacement when the machine alerts you of low ink. I would replace all the colors at a time when only needs replacement.
  I hope this helps.

• OfficeJet 6700 Premium: HP Officejet 6700, black ink fades

  I had my bonus of 6700 Officejet for over a year, so it's just more under warranty. About 3 days ago, out of the blue, the black ink started fading out if I printed a page with a lot on it. It does the same thing if I copy something. (I'm only printing in black). It acts as the ink runs not to the head, or heads are partially blocked upward. It's a new cartridge, but it worked when I first got him. I cleaned and aligned the head several times, without success. Thing I can do short of buying a new printer?

  In the paper here troubleshooting steps can help solve the black print is not correctly on your Officejet printer 6700.

• OfficeJet 6700 Premium: HP Officejet 6700 suddenly will not print wireless

  I used my printer with my iMac, iPhone and iPad wireless with no problems, but today when I want to print wireless suddenly nothing happens. When I check the printer queue to see what the problem is, everything seems fine, it says: "printing - the printer is in use", but nothing happens in the printer. I clear the queue and you try to print a PDF document, a website, an email... but the printer does not have one of this command. I check the wifi conection and they are both connected to the same network. I am able to print the status report and the network directly from the printer Configuration Page.

  I have run out of ideas of how to solve this problem, apart from the connection with the USB cable, which will solve the problem of computer printing, but not from mobile devices.

  Do you have any sugestion for this problem?

  Easy things first. Power off the printer and the router. Turn on the router and wait 3 min. turn on printer and check that it connect to your router. Try now.

• OfficeJet 6700 and ink cartridges

  About 4 months ago, I installed all the new print cartridges (932 black and 933 magenta, cyan and yellow.)  I put my settings to print in grayscale in black ink only and the quality project.  I did all my impression elsewhere and never used the color.  Yesterday, I received alert printer that my magenta cartridge is empty.  I checked all my cartridges and found that my black was about 25% full, magenta was empty and the yellow and cyan are about 23% full.  Why is the printer using all of the color ink cartridges even though I have never changed the parameters of levels of grey, black ink only?

  Thank you for the information.  However, it is strange that he uses more color ink than black ink during the interview, and I say this because I do all my printing in black ink only, gray levels draft quality.  I'll keep this in mind when the time comes to replace the printer that I have no color.

• OfficeJet 8600 Premium: How to print legal letter size documents to computer?

  HI -.

  I have a premium of 8600 OfficeJet with the second option of the status bar. I have legal paper in the Tray 1 (top) and letter paper in tray 2 (bottom). I have tray lock on tray 1 and tray default tray 2 value.

  I have a short page I want to print as a letter, but when I print it prints on legal paper. How to print on the letter (8.5 "x 11") instead of the legal?

  Thank you

  Steve

  I thought about it while reading the other messages.

  For some reason, my 2nd tray has been deactivated, even though I had recently allowed him. To allow him to spend

  System Preferences-> printers and Scanners->-> entry optional feeder supplies and Options and select it.

  Well... It fixed a few minutes ago. I just opened this window to type this solution and I see everytime I open the preferences system that is deselected again. I just selected (enabled) it five minutes ago.

• HP Officejet 6700: I have a a HP Officejet 6700. I can print anything, but a pdf document.

  I can't print PDF.  Everything else works fine.  I use a wireless connection.

  Hello @Tbot,

  Thanks for getting back to me on this subject. Now, because only happens this problem of printing PDF Adobe Reader XI and other devices connected to your printer can print PDFS very well, I think the problem you are experiencing is located in your specific version of the XI Adobe on your computer. I get you to change certain settings Adobe below to check if this problem can be solved.

  Step 1: Disable the "enhanced security" setting Adobe XI:

  1. Open Adobe
  2. Click Edit at the top
  3. Click on Preferences
  4. ' Click on 'Security Enhanced "(Protected Mode) and ensure that this feature is disabled
  5. Restart Adobe

  Now test again to print a PDF file. If the problem persists, please continue to the next step.

  Step 2: Print as an Image:

  1. Open your PDF file
  2. Click file and print
  3. "In the print dialog box, click the Advanced button and choose 'Print as Image '

  Please try to print. Proceed to the next step if the problem is still involved.

  Step 3: Check the updates:

  To check if Adobe updates have been released to correct printing problems, please follow the steps below.

  1. Open Adobe
  2. Click on Help
  3. Select Check for Updates
  4. If a new update is available, please leave the install

  Try again to print a PDF file.

  Still, because everything prints fine from your system with the exception of PDF files in Adobe, it's a problem with the program Adobe itself. If you wish, you can try uninstalling and reinstalling Adobe on your computer.

  You can also reach out to the community to Support Adobe to consolidate specific Adobe: Adobe Reader community

  Please let me know if the steps I have provided to resolve your problem. I wish you good luck!

• OfficeJet 6700 cannot find the printer on the wireless network

  Printer is connected to my wireless network.

  Print diagnostic shows PASS for everything and I have ip (DHCP 192.168.2.19)

  The printer is able to connect to the internet to download updates and pull content for apps (colouring etc...)

  I disabled my firewall of windows to resolve the problems, but the HP software was listed as exceptions anyway.

  Using the printer on my computer connection wizard I entered both the IP address and the host name but it is "impossible to find the printer.

  My router is a netgear WNDR3700.

  The ssid that I am connected is good.  I have a network of both comments, but it does not broadcast its ssid and I am not connected to it.

  I am getting very frustrated.  I'm tech-saavy and it should be much easier than this.

  I wonder if anyone else encountered this problem and can anyone offer suggestions?

  Thanks in advance...

  Hi mbelsey,

  By following the steps below resets the defaults on the printer. Reconnect the printer to the wireless network using the address assigned to the router DHCP. Once you have connected it to try to access the EWS and Ping the printer. Let me know what you find?

  First step: restore the default settings of network on your product

   

• HP Officejet 6700 Premium: HP Officejet 6700

  My printer works ok.

  I tried to do a scan of the scanner to the computer and got some messages as to why the scan did not work.

  I have then started to make a 'x Printer Failure' message 'there is a problem with the printer or ink system. Turn the printer off, then turn it on. If the problem persists, contact HP.

  I changed the cartridge ink black and turned the printer and on a number of times, but now, still get the same message.

  Is there something I can do?

  Hi @PeterBx,

  Thank you for joining the Forums of HP Support!

  I see that you are having a "Printer failure" error message on your HP Officejet 6700 Premium e-all-in-one printer.  I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Due to the nature of this error message, there may be a mechanical failure.

  To help you determine the cause, I have listed a few documents that can help.

  • Error "missing or doesn't have a printhead".
  •  "' 0xc19a0005" or similar error screens
  •  Resolution of the error 'problem with ink system '.
  •  "A Message"Printer failure"which could include a ' 0x610000f6" or "0x61xxxxxx" error Code is displayed on the Control Panel printer or computer

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet 6700 Premium: System/0X610000F6 printer ink error

  I get error 0X610000F6 when you try to print. I went through all issues of troubleshooting on the HP support page. I need help! I don't see paper jams and I replaced the cartridges.

  Hi @Kutz8888,

  "I see that you encounter the error" 0X610000F6 "on your HP Officejet 6700 Premium e-all-in-one printer. I will definitely do my best to help you.

  This error indicates a Jam transport.

  Here is a document that I recommend that you try, HP Officejet 6600, 6700 Officejet printers - 'transport Jam' Message displays.

  Note: If you have completed all the above steps and your product still has a problem, service the product.

   

• HP Officejet 6700 Premium - useless error message

  Only error HP Officejet 6700 Premium "there is a problem with the printer or ink system" I turned off and unplugged but same error with no code.   This message occurs as soon as the printer lights.   Where should I start looking?

  Give a call to HP support technology.

• OfficeJet 6700 Premium: cartridges of OEM 933

  I was told that this printer is perfect for printing low volumn.

  I'm on my third set of ink cartridges, including the black cartridges scence XL that I print almost exclusively in black.

  I get about twenty pages until the cartridges need to be replaced.

  It is a joke.

  HP Announces hundreds of pages, but you get to price a little and then another ink cartridge. He used ink color, even when printing in black only.

  I pay almost $1 per page, with this cartridge.

  Dave708 wrote:
  

  I highly doubt that HP will do anything with a machine that is out of warranty for more than two years.

  It becomes cheaper to buy the printer to price low and throw it away when the ink dries.

  There is nothing you can do.   Read the comments here.

  http://www.Amazon.com/HP-OfficeJet-6700-premium-wireless/product-reviews/B006M1MSKG/ref=cm_cr_dp_see_all_btm?ie=UTF8 & showViewpoints = 1 & SortBy = Recent

• HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

  Printer = printer HP e-all-in-one Officejet 6700 Premium
  Model = H711n
  Number of product = CN538A
  Firmware version = MPM5CN1450AR
  Location = Ireland
  Printed pages total: 152
  Scanned pages: 58

  Other details available on request...

  I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

  A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

  I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

  Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

  After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

  I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

  I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

  At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

  So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

  I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

  Now...?

  OK I managed to make it work and I will try to explain the steps of my best.

  As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

  Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

  So I know that the printer works on at least one access point.

  Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

  IPv4 firewall protection

• HP Officejet 6700 Premium: Don't scan and the scan dialog box will not open

  Since I upgraded my computer to Windows 10, I'm unable to use my scan on my HP Officejet 6700 Premium function.  I can't even open the scan dialog box to look at the options etc.  I tried to find 'Scanner and printer' in painting, but it does not recognize.  Any suggestions?  I already deleted the printer and re-installed.  It was working fine before on Windows 8.

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.