HP officejet Pro 8500 a - problem with configuring wireless from ATT Uverse to Verizon FiOS

Similar Questions

• OfficeJet Pro 8500 a - problem with the wireless radio

  First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.

  Yesterday, I bought a brand new OfficeJet Pro 8500 has.

  Since I have found a little bit of my computer and my router I configure for wireless connection.

  All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.

  By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.

  All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.

  Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.

  Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.

  I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.

  I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.

  I hope someone on this forum knows a solution to my problem.

  Useful information:

  Computer OS: Windows 7

  Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)

  Encryption: WPA - PSK

  WLAN: 802. 11 b / g

  No filtering MAC or SSID hidden

  Other devices on the network are two mobile phones and a Motorola Xoom Tablet

  Printers, IP address: 192.168.1.81

  Firewall: WIndows (the router is disabled)

  Concerning

  Thord

  Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.

• HP Officejet Pro 8500 has problem with black ink printing

  I have an Officejet Pro 8500 a printer. When I print documents, it will not print anything in black ink. The colors work very well, but just black will not print. The printer says that the black ink cartridge has plenty of ink, and when I shake it, I can say that there is something in there. So, I don't think it's a question of black ink out. Is there a chance that something is blocking the ink out? Any patches for this in addition to the purchase of a new ink cartridge?

  Document here can help solve the black is not printing on your HP Officejet Pro 8500 has.

• HP Officejet Pro 8500 A909a_ Scan with HP Solution Center does not work

  Hallo.

  My name is Michele.

  I can't use the solution Center HP to scan with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because when I click on "Scan document", a white error window appears and says "necessary component is unfounded or not properly installed.". Install new software HP Photosmart". I uninstalled and again installed the software, but it does not work. Previously, he worked with XP. Recently, I updated XP with Windows 7 and I found the solution Center HP does not work. Maybe, it does not match with Win 7?

  Thank you to everyone who wants to help me

  Hi people,

  I appreciate the time you took to try to solve this problem. I was able to do more research and found a useful solution, please click on the link below to get started:

  The HP imaging device is not found... - popup error

  Please try the recommendation and let me know the results.

  Thank you

• New IPad airprint can't find the Officejet Pro 8500 A909g series with firmware DLM1FN1006BR

  The series Officejet Pro 8500 A909g with firmware DLM1FN1006BR is satisfactory airprint on the new IPad?  If not, is there any difficulty?

  No, your printer is not capable of AirPrint and can not be.  You can try other printing applications, like HP ePrint home & Biz.

• HP Officejet Pro 8500 has compatible with w2k8 R2 e-all-in-one printer drivers and XP clients.

  Hello

  I am looking to buy one-

  HP Officejet Pro 8500 has e-all-in-one printer (CM755A) - for our Organization, we use Windows server 2008 R2 Standard 64-bit with XP clients and wanted to know if this printer is compatible with w2k8 R2 drivers?

  Looking forward to hear from you.

  Thank - you

  It is compatible, but what I recommend is to get a newer version of the 8500 which is 8600

• OfficeJet Pro 8500 Premium a don't print from my laptop

  I have an Officejet Pro 8500 a Premium. Juice I had charging ot my driver, thinking that he would resolve the question below, but it didn't. The connection string is portable-> docking station-> ethernet to the router-> ethernet for printer.  On my laptop, I can see the printer ink levels so there is a link but when I try to print, and then select the printer Officejet 8500-(no fax), it tries to print to fax 8500 a and then jump upward with a box of fax.

  Additional information:

  I tried the following:

  -Changed the port to 8500 a fax

  -A tried to set the default printer of the fax to the network printer - received an error message: operation could not be completed (error 0 x 0000709). Double check the name of the printer and make sure that the printer is connected to the network.

  I think I got it this morning.  It seems that I had a print driver that is hidden on the laptop. I say this is because when I went to the printers and drivers in the control panel it showed no printer driver.  I then turned off my laptop, the printer is off, run a usb cable from the laptop to the printer, started the computer completely started printer and print driver has shown in printers and devices.  He is currently working.  I can't really explain why it worked, but it did.

• OfficeJet pro 8620: officejet pro 8620, error: problem with ink system

  During the initialization of the printer, after that I inserted the ink cartridges, I get the error: "X-problem with ink system... I followed the directions: "lift the latch on the print carriage, reinstall the print head and then remove the cartridges and inspect leaks." Do not use cartridges that leaks. If the cartridges are OK, re - install. After you have reinstalled, turn the printer off and then back on. »

  Well it don't turn off the printer... I get another message: "the printer initialization and the ongoing calibration.» Do not put off the printer or turn off the power during this process. »

  I repeated this process on 6 or 7 times with the same result.

  I use "cartridges Setup" he claims.

  Help, please!

  Thanks in advance...!

  Johnny

  Hi @JohnnyLee,

  Welcome to the HP Forums!

  I understand that you found the error, the problem with ink on your HP Officejet pro 8620 system. I'm sorry to hear that, but happy to help!

  I recommend going through this guide, printers HP - "Problem with print head", "Printer failure", "Ink system failure", or "0 x." r "C2."... "Displays Message error.

  If the guide does not help, please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• HP Officejet Pro 8600 more: problem with HP Officejet Pro 8600 more light

  As soon as I turn on my printer after some time one get a short flash printerscreen code: B84D7A4. Subsequently, I get the massage that I have to powerdown the printen and turning the power on again. This repeat hisself without end. If I disconnect the network cable from the printer starts normal. As soon as I connect the network cable, I get the same error code.

  If I connect to another network port, I have the same problem.

  Who knows the solution for this.

  I can still print via USB cable in. But I don't get the option to the printerscreen: SW update.

  Greetings @HPofficejetPro,

  I saw your post about the problems you are having and I can find some things that you can try.

  Have you tried another ethernet cable?

  The same thing happens when you connect with a USB cable?

  HP regularly publishes updates of firmware that can also correct the problem you are experiencing. With the USB cable is connected, you can click on this link to download the firmware update for the. HP Officejet Pro 8600 more e-All-in-One Printer - N911g.

  Is the printer connected directly to a wall outlet or a surge protector or a power bar? We want to connect it to a wall outlet so that we can eliminate the source of energy as the primary cause. See this document for more information on the problems when connected to an uninterruptible power supply/Strip/surge protector power (Note: this document is not limited to printers Laserjet.)

  Please let me know the results, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.

• OfficeJet Pro 8500 can operate with only the black cartridge?

  I have never use my color printer and do not want to buy color cartridges. Can I program the 8500 to print with just the black cartridge. If so, how? Currently, the printer does not work if all the cartridges are not loaded and with ink. Please notify.

  Hello

  Please try: put a piece of tape on the oblong hole in the ink cartridge of, it will continue to print black only. And once again, it is only a few pages.

  Kind regards.

• Officejet Pro 8500 printing problem has 909

  Not blue print. have you tried the alignment and not cleaning several times, still get no blue including print quality diagnostics Page. Alignment obtained, which do not have messages. Hope it doesn't me printhead is faulty as I have had recurring problems with this machine.

  This will sound stupid, but have you checked to make sure you have blue ink? If you're here, then yes it can be a print head problem. Remove the printhead B/M and check the date on the side. If it is under warranty, then I would contact HP to get a new print head. If it is not in warranty, then I'll try to do a physical cleaning of the print head to clear which can clog the blue nozzle. Following the link are details of HP and steps physically clean the print head. Let me know what happens.

  Details of HP.
  http://goo.GL/WaHYM

  Physical cleaning instructions:
  http://goo.GL/DfroJ

• HP Officejet Pro 8500: Printer problem

  Hi team, support

  I have a problem with my printer. Please see below:

  1. before that my printer works fine, but lately the printer have problem when print me color in this printer, it is not with the color I want.

  for example: my Office Logo is blue, when print logo turn pink.

  I try to replace the new one ink cartridge (Cyan) but still the same.

  2 each time after printing, the printer will be appear alignment recommended for cartridge and printerhead then the report with color. There wasting my ink cartridge.

  Please correct my problem immediately.

  Thank you

  Best regards

  Ain

  Hello

  You may need to replacec the printhead Cyan/Magenta to solve the problem.

  visit www.hp.com/go/SureSupplyto purchase online, call for another HP Technical Support.

  If your printer's warranty, you may have a recovery option (US - 1-800-474-6836)

• HP officejet pro 8500 has 910 with windows vista to abnormal termination that don't resolve

  My printer was given to me and will loop continuously: it starts and displays the progress bar, operates the head printer port.

  poster 'abnormal termination' and stops and resumes the same loop again and again. I tried both the soft reset and hard reset with no results or editing, he keeps just loop. I checked for paper jams, removed covers and clean the printer replaced the cartridges of ink and cleaned printer heads, made a complete Visual inspection, nothing helps. (I'm a computer technician).

  I am at a loss here and any help would be greatly appreciated!

  Thank you!

  Well, I received my new adapter (the correct one) and it solved the problem! Only now I have a jam to carriage of mystery that I will work on next.

  I'm going to mark it as RESOLVED, because it fixed the issue I was addressing. Yep! Make sure you have the right adapter.

• set of fax for HP Officejet Pro 8500 has more with the Mavericks BONES (10.9)

  Utility HP via a wireless network see Configuring fax correctly.

  Printer and scanner works fine.

  Under "Add a printer" in system preferences, the fax feature does not appear as an option.

  all functions has worked well with OS 10.8

  have transformed the firmware update 8/13 and reinstalled drivers 10.8 but found none for 10.9

  Any suggestions are welcome.

  Hello

  Have you tried updating your software for the Mavericks?

  If you run Apple Software Update provides with something new.

  Please try the following fix:

  http://support.Apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  Under 'Add printers and Scanners', the device should appear with 'Fax' at the end of the model name.

  I hope this might help.