HP officejet pro 8610: cartridge HP officejet pro 8610 problem "" missing cartridge ".

Similar Questions

• OfficeJet Pro 6830: Problem with multiple Pages into one file

  I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

  I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

  Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

  Please advise.  Thank you.

  Hello

  Scan you from the glass flat or the top of the charger page?

  If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

  If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.

• Officeject 6830 Pro: Color Officejet Pro 6830 problems

  I have problems with the Officejet Pro 6830, I can't get the color red and purple to print on all my documents, instead of Red that I get pink and violet, I get blue.

  Hi @Chantilly005.

  Welcome to the Forums of HP's Support. I understand that you have a problem with print quality. I would like to help.

  Try to go through the following troubleshooting document. HP Officejet Printers - the problems of poor print quality

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• HP officejet 5740: HP officejet 5740 printer problem

  HP officejet 5740 - having problems printing.  Output is white pages with light smear.  However, when I run the diagnostic tests (step 3/level), information will print correctly.  Now, just keep using more and more ink on the different levels of test diagnoses but still cannot print or copy simple documents.  Suggestions?

  Hi Photoray002,

  Thanks for your reply.

  In fact, I found a video online that solved the problem for me.  Faulty ink!  Cartridges showed they were half full, but once I replaced the ink, the problem has been resolved.

  Never had this before so was quite a revelation.  Keep your answer on the record in case something pops up!

• CS6 first Pro installation problem

  I am trying to install the Premiere Pro CS6, but when I do, I guess these files are supposed to be pro first appear (note that I tried to install several times)

  

  I'm running on Windows 10 Pro 32 - Bit x 64 - according to the owner, the problem doesn't force me to do anything, if I leave and you try to install the Premier Pro, the problem occurs, and it is never worked before on my computer, I don't have Add ons.

  It's confusing me, CC said I installed it and I don't have Photoshop installed fine, but Premiere Pro is not, anyway I can fix this?

  Bryson,

  You need an OS to run Premiere Pro 64-bit. It has been like that for quite a while. Sorry...

  Thank you

  Kevin

• Acro pro.msi file missing how this is fixed?

  Acro pro.msi file missing how this is fixed?

  Sarojini,

  Thank you for the continued upward.  I could solve the problem.  It seems that it was an error in the installation of XI.  Acrobat X was not completely removed from my system, and the two X XI were on my computer.  However the file to uninstall X was missing and that the two programs would not work. No program appeared on my computer as installed.  Somehow I was able to get the window to recognize the two programs and uninstalled and reinstalled both XI.  I was most of the night working on this but I finally got it to work.

  Dave

• HP Officejet Pro 8610: Problems for install HP Officejet Pro 8610 e-all-in-one printer on Windows 10

  We have a HP Officejet Pro 8610 e-all-in-one printer that is connected to the network.

  The printer is installed and can print successfully from 3 desktop with Windows OS 10.

  4 desktop pc with Windows 10 is not able to install the printer drivers.

  When addind printer with device to add the printer is recognized and installed, but only the driver scanner.

  We have tried to remove the printer some time but without success.

  Also, we tried using various HP and Assistant tools, but these tools can not install the printer driver.

  Adding the printer manual, also don't do not install us the printer driver.

  The only driver installed is the scanner.

  We are out of ideas, you can help us with all the great ideas.

  Sincerely,.

  Gilbert

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  Good day!

• OfficeJet Pro 8630: Problem with cartridges

  Hello:

  They yellow cartridge in the printer ran out of ink.  Normally, this isn't a problem.  I opened my new pack of ink and replaced the yellow cartridge.  The printer freaked out and said that there was something wrong with the cartridge.  Not OK, so I put the old one back, no problem.  Today I went and bought a new series of color cartridges and replaced the yellow cartridge with that of the new box.  No, same thing.  It is said that the cartridge appears to be damaged.  It's new!  It really can't be anything wrong with each cartridge.  Any ideas?  I really need to be able to print some elements in the next day or so.

  I ended up having to buy a new printer. This time, I bought the extended warranty. Thanks a lot for your help.

• OfficeJet Pro 8610: problem to define the officejet pro 8610 mac software

  Hi, I have a problem to set up the software with easy start. For my desktop computer (Imac), it worked very well, but for my laptop (mac), it is stuck at 93.3% when downloading the necessary software... If you explain that it will be welcome. Thank you.

  Hello @Ahlmy, greetings!

  Thanks to their participation in Forums of HP! I see by your post that you encounter the problem to set up the printer on your laptop MAC 10.11. I will definitely do my best to help you.

  Please, try the steps mentioned below and check:

  • Click on the Apple menu icon and then click on System Preferences.
  • Click on printers and Scanners, print, Scan, or print and Fax.
  • Click the Add (+) button.
  • Search, then select the name of your printer in the Printers list, and then click Add to add your printer.
  • Click on print to help... and then select the name of your printer (default "Airprint" would be selected)
  • Now try printing.

  These measures should be the case, I would like to know the results

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Officejet Pro 8610: Problems scanning from Adobe to the adf on printer

  
  

  I've updated the software from Adobe, and now it works, except that it analyzes the legal size, which I can fix it.

  Thank you very much for the help.

• OfficeJet Pro 8610: Problems of locking tray 8610 Pro on Win10

  I have tray 2 installed and recognized on the pc and printer. I have lock Tray 1 for our yellow receipt book and tray 2 as the defauly. In our payment software, I chose the printer and configured to print receipts from Tray 1. It keeps pulling the tray 2 tho. I just upgraded to the premium 8600 and it worked with it very well. Any help would be great!

  Thank you

  Lacey

  OK yes I installed it and it seems to work ok. I just have to make sure that my default printer in printers & peripherals and in my software of the company are the same (network or usb)... .not one and the other. After that, I checked tray 2 has been installed in the properties of the printer on the pc, my tray lock 1 was & tray 2, the default value of the printer it self and while my receipt paper tray default has been set to 1 in the software of the company. Works without problem!

• HP Officejet Pro 8610: Problem offline with Windows 8.1 printer - HP8610

  We had a power failure last week and since I can't get my printer to work. He always tells me that I am offline. I followed some of the advice in this topic but nothing works. I'm ready to throw the sponge and the printer out the window! It all along had a problem disconnect if I don't use it for an hour or two, but more often by just turn it off and turn it back on, it worked. Not this time. Please can someone help? It can't be that hard, can it?

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• HP Officejet Pro 6230: HP Officejet Pro 6230 problem

  My officejet pro 6230 has all the lights above the ink colors flashes way slowly from left to right. The printer will not connect to our wireless network and is not recognized by the computer. This all happened after the replacement of all the ink cartridges. Any help would be greatly appreciated. Thank you

  Hi user,

  It seems that your print head problem.

  HP released the document for that matter. Please follow the document to solve the problem.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6230-ePrinter-series/5390318/model/5390319/document/c04839288/

  Hope this will help solve the problem.

• OfficeJet Pro 8620: problem with ink

  Hello. I have nothing else to the HP printers used in my life using the computer - more than 25 years! I bought a new Officejet Pro 8620 2 years. I also bought cartridges refilled at the same time as my father died and I would need to use the printer a lot. Unfortunately, I bought ink another 3 times for this printer, when printing somewhere near 100 pages ALTOGETHER since the purchase. Problem is the printer keeps saying cartridge is not HP and damaged - should replace the HP cartridges. I've NEVER had a problem before using reloaded cartridges. Why change now? Am very close to get back to using my old computer Win XP and more old HP all-in-one printer. I have 3, and none of them has NEVER given any problems.

  Looking for help on this. Have always had confidence in HP before - don't want to lose that now. Last cartridges were new HP, but still having the same problems. Suppliers of ink have been highly evaluated with excellent reviews. Warranty expired a year ago. Haven't had extended warranty because, as I said, never had a problem with HP printers to more than 25 years.

  In addition, cellular internet very limited - and not (!) reliable. 50 miles of the city.

  Yes, I learned a LOT over the weekend. First of all, I ordered a few inkplicity.com ink. Am curious about their ink, with their 1 year warranty. Shortly after ordering, I contacted Fuzoo, who then asked me to photograph both sides of the chip. I had no idea of the chip was removable. And actually, I see on the YoYoInk cartridges that the chip is glued in place. Then, I saw a few chips ink auto reset for sale online. And then began to find a lot of links and messages and articles on the chips of HP and the problems associated with them. Like my old printers were about 2000 or so, I had never met the problems associated with the current chips.

  Now, Fuzoo has graciously agreed to replace not only the Magenta faulty cartridge (which has their 'old' piece), but will send a full order before, which was black (2) and a set of color inks. Can't get much better than this! So it would seem that I'm no longer need an explanation of why this happens - it's all about HP and their need to force their customers (who FREELY CHOOSE to buy their printers) in the purchase of HP ONLY cartridges.

  It is a free country that is stuffed with capitalism. You'd be hard-pressed to get into any grocery store and NO search of generic items just alongside their counterparts in brand and usually for less money. You have car trouble? Generic (non - OEM) parts are available, as well as a lot of rooms refurbished. HP should remember their place in the grand scheme of things, or they will go the way of many other electronics companies. Trying to force customers to pay more for ink is bad. ... So this would increase the cost of the printers in the first place? Yes, probably. I was always ready to buy quality products when I could afford to, and HP printers had always been reliable but also easy to use. With this printer, I swore to the dang thing a lot more that I used it.

  Please, ch, make the message and ease up trying to railroad customers. Even us loyal customers for a long time "' will leave! Don't forget, we are customers of HP by "choice"!

  Problem is now solved. Thank you all for your comments!

• Gray printing Officejet Pro K550 problems

  Hello.

  I use a HP Officejet Pro K550 (STD) as well as a new Acer Veriton PC, equipped of Windows 7 Professional 64-bit O.S.

  For normal printing, up to today, it works well, but they are a couple of days, instead, if I print an image, by selecting the "Gray Scale" - high quality option in the printer properties, everything that fate, causing printed in RED scale!

  If instead, I select 'Gray Scale - only black ink', it prints normally.

  What is going on?

  The cartridges are always at the right level (Black XL just replaced) and even after using the utility Scan Doctor, it seems everything is OK... but this isn't reallly so OK.

  What can you tell me?

  I have to print several copies in the next few days and wouldn't no more free time, paper and inks...

  Thanks for the help!

  Hi robevix,

  Welcome to the Forums of HP consumer printer.

  When using gray scale - high quality, he used some color to enhance black. You can browse some general troubleshooting that might help solve the problem:

  http://support.HP.com/us-en/document/c01956550