HP Photosmart C4580 cannot find network Verizon FIOS wireless

Similar Questions

• HP Photosmart C4580 - cannot print two-sided, w / color, & don't scan on my Mac.

  Hello! I have a HP Photosmart C4580 and just got a Mac. Number of issues,

  (1) after that I finally found the duplex printing option for my powerpoint documents it wouldn't let me not and was gray/gray. I had to change the printer driver to something else to chance, and click on allow "duplex" (tried to do some research). Then when it let me print duplex he'd let me not print in color!

  (2) when I go to HP Scan Pro to try to scan something it says "error, sorry, scanner could not be initialized. Scanner not found. "My printer is on and can print documents, and my software is up to date. So a little confused.

  Any help is greatly appreciated, thank you

  Hello

  Please specify which version of Mac OS you have.

  to locate the inform, the Apple icon and click on about this Mac - OS version is displayed on this screen.

  How to set your printer?

  Using the CD, download it from the Web or simply connect to your mac and adding the pritner?

  As C4580 model State enterprises does not have automatic duplex unit unit 2 faces, the duplex option should be faded out.

  In order to manually, double-sided printing, open the print dialog box and click the 3rd selection box (Copies & Pages)

  Now select Paper Handaling

  Set the page to print in the form strange only and do printing.

  Now place the printed pages facing up and perform additional characters, while fixing pages to print mode only

  Now select paper Type/quality (the same menu to select paper handaling)

  Devote the Color Options by clicking on the arrow to the left to her.

  Make sure that it is set as ColorSmart/sRGB.

  On the issue of the analysis, please let me know the version of Mac OS that the HP Scan Pro is designed for older versions of Mac OS, while that for Mac OS 10.6 and above all the appropriate software contains the HP scanning software

• Setting up a Photosmart c4580 HP laptop without a router wireless...

  Hello

  I bought one for features wireless Photosmart c4580 because we are on the road a lot, but I can't seem to set up.

  I have a broadband connection to the usb Pantech Verizon for internet and I guess it does not recognize that.

  How would I go all setting this up with my HP dv7 laptop with Vista 64 without router?

  I use Norton Internet security. Don't know what the hell I do

  Thanks for the help ():

  Hello

  Thank you for your time to answer me. I appreciate it. I couldn't get your solution to work, as I posted in another forum, someone helped me and it put in place immediately. Maybe because I have Vista instead of XP or most probably I don't know what I'm doing.

  Here is the solution on this forum:

  http://h30434.www3.HP.com/PSG/board/message?board.ID=networking&message.ID=2724#M2724

  Yet once, thank you very much for answering my question, I appreciate your time and effort.

  Sincerely, Jan

• HP C4580 cannot print - connected usb or wireless

  I have a photosmart c4580. When I first got the Wireless does not work, but it worked very well hung usb. Finally hanging it slowly stopped working. Print jobs go in "printing" but the printer is never the work and nothing won't print, unless I want to unplug the printer, plug it in again. Now even that does not work, so zero impression continues anyway. I literally spent hours scouring posts on this forum to try to fix it and no luck. I did everything I could to go into my router settings and messing around with it, uninstall - relocation of 100s of times. No luck. I don't care even wirelessly right now I want to just be able to print with a cable. Any help?

  What operating system?  You have disabled your security system to see if it's getting in the way?

• HP Photosmart 5520: cannot find the printer

  Until last night I only had intermittent problems, using the scan on HP Photosmart 5520 function.  Then all of a sudden not analyze or print work - message there.  MacAir displays the RED DOT printer offline, by default.  The printer has remained non-connected.  I restarted MacAir.  I have turned off HP 5520, unplugged the wire to plug in a normal machine (of an extension of protection against overvoltages).  On reboot I have always run.  I then tried wireless live - without success.  Then, I removed the 5520 HP of the MacAir intending to reinstall.  To attempt to reinstall Mac Air is unable to find a printer.  The HP 5520 wireless network test results show no problem.

  Please notify.

  Problem solved.

  I turned Mac Air, printer and router off and restarts.  It worked.  The problem was the router!

• Photosmart C4780 "cannot find the wireless router.

  OK so apparently I'm not as tech savvy as I like to think of myself. I just got a used C4780 and spent 12 hours trying to figure how to set up so that I can print wireless. I had zero luck with that.

  I read that the WPS connection method is more easy then I tried that first. After a few failed attempts, I tried to download the software for Windows 8 (as the disc that comes with it only goes to to Windows 7). I got the same error message 4 times (something Microsoft Visual C++ Runtime error), so I then tried the method of the PIN code. After several settings (with the help of my brother on the phone, so I don't really remember what I did unfortunately) just as many failures to connect and I gave up this process.  I printed the 'Network Configuration' Page and the 'wireless network Test report", but I don't have much of a clue as to what it now means. I don't understand what I am doing wrong or what I could do different. The thing that really stumps me, is that the test report said that the printer can't find my router, but at the bottom of the Configuration Page, it lists my wireless network...

  USEFUL/IMPORTANT INFO:

  -HP Photosmart C4780

  -Lenovo all-in-One 8.1 Windows 64 bit

  -router made by ARRIS and provided by my ISP (CableONE)

  -J' installed all the updates that are available for Windows

  -J' restarted the printer, computer, router AND several times

  -my wireless router is in another room, but not more than perhaps 20 feet away

  Side note: I have also a mini iPad... just throw it out there in case it might be a better tool to put up with... If you need to know something more to help me let me know! Thank you for cause in advance that I'm going stir crazy trying to figure this!

  JanessaMarie92 wrote:
  I went on the website of my ISP and discovered that I can't get a new router because of this little note...

  "Cable telephone Service is supported only on Arris modems rented your office of a cable or bought by http://yourbroadbandstore.com/solutions/cableone/."

  Copy + paste directly from their Web site.

  It's OK... you're using their product.  they can always put the Bridge mode.  Call them and tell them that you want to use your OWN router and they put it in Bridge mode.

  EDIT - Bridge mode just turns off the router part and use it as a modem only.

• Photosmart 7520: Cannot find my scans on computer since installing Windows 10

  Since I've upgraded to Windows 10, my printer scans but I can't find the scans on my computer. There seems to be no way to put the scans I would.

  Hello
  
  Thank you for using the forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462#Z7_3054ICK0K8UDA0AQC11TA930C7
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Open the HP printer assistant and click Scan.

  "Under the user of Scan interface > advanced settings ' > click 'Destination' > choose and type your location"Save. "

  Example below:

  

  

  Hope that helps.

• Cannot find network shared printer

  to change printers and now with vista laptop can't find shared printer (with xp) - no problem with gettng online

  You guarantee that the file and printer sharing is enabled in xp and vista? Have you try mapping IP is either the computer/laptop by which the printer is connected to? Have BTW you installed the printer drivers? Under network and sharing Center check it out and see if you are able to see the two pc or laptop? Also make sure there there is no third-party firewall if, either set it up or have it uninstall

• Cannot find network cards with Vista

  Hello

  I have problems with my Dell Inspiron 1720 under Vista not recognizing one of my network cards. I checked that my modem and router work correctly (they are) but still my laptop will not pick up not my Belkin N1 router wireless signal or when I hard it wire as it says network adapters are not found. I had a series of reports of unusual message telling me that the 'State of dependency is unknown", and that I should try to restart the DCHP etc. I followed the instructions to the point where it says "Windows cannot fix this problem - contact your service administrator.

  Any thoughts?

  Did you check the status of your network adapters in the Device Manager? If they are disabled, try allowing them.

  I hope I could help

• Windows cannot find network mode safe mode with networking cards?

  Hello.

  When I try to access a Safe Mode with network I can not connect to the Internet, because windows can not find any network adapters. But it is perfectly fine in Normal Mode. I tried to uninstall and reinstall the NICs without success. What can I do? I need help badly.

  Or is it simply not not in safe mode with network and will rather /normal/Mode safe.

  BTW, my laptop is model Vaio series S 2011.

  Thank you very much.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet in safe mode with network. Please correct me that I misunderstood.

  Please provide us with additional information by answering a few questions below, this will help us better solutions to the problems.

  -Why are you trying to connect to Internet in safe mode with networking?

  -Do you get any error code or error message?

  I doubt that the choices you make in the options of safe mode takes you to the safe mode and the insecure with networking mode.

  Please do the following and check if you are able to boot into safe mode with network.

  a. restart the computer and press the F8 key during reboot, until you get the Advanced startup options.

  b. in the boot advanced options, use the keyboard to select safe mode with network and press ENTER.

  c. This will start the computer in safe mode with network. Once the computer has been started, check if you are able to connect to the Internet.

  For reference:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Please try these steps and if the problem persists, please tell us so that we can help you.

• Windows cannot find network card until I reboot

  Hello

  I noticed a few threads that are similar to my problem, but I have a recurring problem that is boring and not too disruptive. Everytime I turn on my computer Dell Inspiron desktop for the first time, every day, windows is unable to locate a network card is installed correctly.  When I check in the network device manager, there is nothing available. I then restart my machine, and then windows (64-bit 7) finds the suitable network and connect to my router etc, and all is well. When I check the Device Manager after the reboot, I see under network: Broadcom Netlink (TM) Gigabit Internet.  When I click on this and try to update the driver, reports of windows that it is up-to-date!
  So, my problem happens whenever I start my computer, but never when I restart!
  Any suggestions? As I don't want to start and restart my machine every day of her life!
  Thank you very much
  Mick

  I suspect a hardware problem with the adapter.

  You can try to uninstall the card in the Device Manager and then reboot and let Windows reinstall.

• HP Photosmart 6525: cannot find printer to scan to.

  When I on the printer to scan to computer HP photosmart says not connected.

  Reinstalled software and it worked!

  Thank you

• Windows XP cannot find network card

  WinXP r3.

  Last week, it happened.

  See the NIC hardware Manager...

  XP can't find it.

  Linux ran resue disc for diag, he see it and runs it.

  Scanned with 2 AV programs, only 1-2 little things.

  Router, view map when enabling/disabling of the bios.

  Thank you... If I have to, I can get the Info material system and its Committee of intell Core 2 Duo...

  Intel DG35ec desktop

  NO software of hardware change.  (Check the history)

  WELL, I tried something and it worked.

  I have zipped past 1 small thing on the hardware Manager.

  EVEN if it appears and NO red check marks...  To read the first tab discription...

  Driver has not loaded.

  1 fixit works when you can not connect?  thought it was an AutoCorrect entry.

  2 done, and he could not find the net card... do not see at all...

  as if something was to keep XP to put material config.

  (history)

  8 months ago this person, click on the button to send MS a warning of failure of...

  Quickly, she was contacted by the problem. (no problem)

  Claiming to represent Ms.

  She paid to have this service whenever something has been reported.

  1 week ago, they called and told him that his coverage was ending they needed more money.

  She said no.

  They mentioned that would end his service and his net service would leave... 1 hour later... She had no internet.

  We strive to collect information on them... but Peter parker and Mark (?) williams info given, leads to STRANGE phone numbers.

  She paid several times with a credit card, and the company will not disavow further charges because she allowed them before.

  Let's see if we can follow the Bank they went to... and see if we can send this information to Ms.

  NIAS business solutions...

  Freeze.com

  W31 BOT... not considered virus?

• "Cannot find network hardware" after re-installation of Windows XP

  I had to reinstall windows completely because of a system error message that says that a critical SYSTEM32 file was missing. So I did, but now my computer is missing features network and internet, doesn't let me install a network and does not recognize my ethernet connected to broadband (don't even know cable is plugged) and does not recognize or know when I put my Dell TrueMobile 1300 card. I have no CD with the software or drivers or some way to get on the internet. How can I solve this problem?

  Hello

  On a different computer, go to your computer manufacturers website, add the name of the template in the search bar of support page and download all the drivers.

  Place it on a USB stick and install the drivers first network so that you can get online.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• DMA2100 cannot find network

  It is probably something easy. I just bought a DMA2100. I went through the routine of installation, including the configuration screen. When I get to network connection issues, choose wireless, then it goes in search for wireless networks screen - and crashes. No wireless networks are found, can not go backward or forward to the questioning, need to repower or reset the device again.

  I have a router Netgear Wireless G with WPA2 encryption. The router is only 10 feet of the DMA. I also disabled the encryption for a bit to see if this can help, but it didn't. And there are other networks in the region where he would have to see also, but it didn't, just hangs.

  Any ideas or suggestions?

  Larry

  As a final to this channel update, I found an ethernet cable just long enough for the DMA to the router. Then I went through the Setup routine using ethernet wired rather than wireless. Above all, I was hoping that some additional settings may be available or miracle.

  What happened, was that she did almost immediately an update of the firmware online. I have reset the device after, disconnected from the ethernet, then crossed the wireless configuration. It is immediately found my wireless network and about 10 others in the region.

  So I guess the firmware loaded with the device was somehow bad. Don't know how a wireless client can only update the firmware on this machine, but I got lucky.

  Larry