HP Probook s 4330: HP Probok 4330 s SSD - OS upgrade not recognized

Similar Questions

• Internet connection lost when power is removed Probook s 4330

  HP probook 4330 s

  Windows 7 Ultimate + service pack 1 64-bit

  Driver: Microsoft 3.0.0.41 RALINK driver (up to date when I do a search)

  When I remove its internet external power is lost.  The wireless connection always seems to be in place, but there is no traffic.  I can't ping anything in this case.

  The only way to get this up and running again is to

  1. Insert the AC power

  2. restart the service dhcp client (sometimes required to conduct more than once).  The service has not stopped, but for some reason, it becomes it running.

  I also tried to disable the 'allow the computer to turn off this device to save power ".  But that did not help.

  Have spent a long period of problems, have almost tried everything and am at the point where I am considering the purchase of a new laptop computer.

  Kind regards

  Paul

  fixed by updating with the latest wifi driver

• ProBook 4330 s + SSD

  Hello

  could someone me - is this compatible with my computer SSD notebook probook 4330 s?

  And what better brand for SSD?

  THX

  Yes, the laptop uses standard 2.5 inch wide SATA drives. That the SSD will work. Kingston is a good brand, but I got lucky with the Samsung 840 series.

• HP ProBook s 4330: working in window 10 missing/no Base system device drivers

  Hello

  I installed window 10 and since then, I have had different problems.

  Lately, I noticed that the device driver Base system is not working and also something else not identified.

  Please find below Haedware IDs for those who do not work the drivers

  PCI\VEN_197B & DEV_2393 & SUBSYS_167E103C & REV_30

  USB\VID_138A & PID_003C & REV_0086

  ACPI\VEN_HPQ & DEV_0004

  Can help you in there to fix it please?

  Thank you

  G

  Hello:

  You need these drivers for devices...

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  FTP://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66915.exe

  This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• HP Probook s 4330: could not find a way to factory reset

  Hello

  I was try to factory reset my old laptop to clean up before I give it to my brother, the problem is that I can't find a way to do it.

  • I don't have a windows disc so I can't reinstall windows.
  • I don't have a recovery disk.
  • I can't find a program of recovery on the computer Manager.
  • Pressing F11 at boot is not nothing at all.

  Is there another way to factory reset or y at - it another way to reset my computer other than the factory reset?

  Help much appreciated

  / Joel

  Hello:

  If the F11 calls don't work, then your only option would be to buy a set of recovery disc HP for your laptop.

  You can get them by calling 1-800-334-5144, if you live in the USA/Canada.

  Have the serial number of the laptop handy to give to the customer service rep.

  There will be a nominal for the discs, if your laptop is out of warranty - the last time that I had to pay about a year ago, they were sent by first class $ 10.

• HP ProBook s 4330: UEFI recovery

  Hello world

  Brief history of the problem:

  I tried to convert my dynamic GPT partitions based, changed the code manually and got BSOD when booting, Windows wasn't loading but at least tried to. UEFI (menu BIOS graphic nice) worked very well at this point.

  I booted from a Linux distribution and tried to change the partitions back codes. At this point, something was wrong and I lost partitions HP_Recovery and HP_Tools. Pretty graphic menu missing BIOS, the system has stopped, loading at all.

  I booted from a USB key again and I tried to restore the partitions. My scores are now looking at this:

  MBR (1 MB) - system (300MB) - (400 GB) - unallocated space (46GB) - HP_RECOVERY (15 GB) - HP_TOOLS (5 GB)

  I was able to successfully mount them and check the files - everything seem normal.

  Tried to fix my Windows, started from an ISO and it gave an error "System Recovery Option is not compatible with the version of windows that you want to repair" while I don't know the version is the same. Tried to install Windows from scratch - turned out he does not see the disk at all (I did not try to inject the drivers however).

  Now, I'm a little hesitant how to proceed. I can't repair Windows because he does not see the drive. I can't go into the BIOS settings, just diagnosis of options. My HP_TOOLS and HP_RECOVERY appear to be healthy but just somehow is not accessible. First of all can I correct my UEFI? But how?

  Some additional information: when the laptop starts up, it gives me standard options F1, F2, F9 (select boot device). Under F9 I see options such as "HARD disk", "Upgrade Bay" and "USB" (if inserted), but both "HARD drive" and "Upgrade Bay" cause a message clear indicating "no found boot device".

  Please notify, any help is very appreciated. Thanks in advance.

  Well, I guess I'll post my solution here for future generations.

  1. I have recovered and reactivated the HP_TOOLS partition using these instructions:

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-use-the-HP-BIOS-update-UEFI-utility/TD-p/337347

  2. I backed up my entire HARD drive using the USB external with gparted (debian based) usb live. Then I deleted the corrupted partition table completely, gdisk order if someone interested. I'm not 100% sure but I think I've changed the table of gpt for msdos.

  3. then in BIOS/UEFI - still not sure what it is - GUI Advanced BIOS-as - changed my HARD from AHCI to IDE disc type.

  4. started from ISO of Windows and this time it has detected my drive. Even more, I managed to launch repair and restore all my partitions and bootloader.

  5 tried to run - had a BSOD, but at least it was loading my old Windows now.

  6 a changed type of disk HARD back from IDE to AHCI - and voila! -my old Windows started normally.

  Now he's back in basic disks as I wanted, the only thing all the partitions except air system damaged now. I guess that the Windows repair tool just didn't care for them. It's kinda weird that I was able to read the files on them to Linux and both systems say it is an NTFS partition that is healthy, but it does not look good. Probably, I'll try to recreate it using my backup, but this is already another story.

• Base the missing ProBook s 4330 peripheral system

  Hello Experts HP, I have a problem unfortunately with this missing driver and I don't find that so that never, I have tried many searches and I still can't to do work.

  For some reason any my wireless limited connection sometimes goes and then suddenly back. But after turning off the wireless and on or restart the computer and it get really annoying.

  Is my product number: LW796ES #UUW

  Hardware ID:

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  No idea how I could get help?

  Thank you in advance and sorry for the inconvenience!

  Sincerely,

  Yurac

  Hello:

  See if the latest driver is useful.  Other than that, it's not anything else I can think of to do.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&taskId=135&swItem=ob-113862-1&mode=3

• HP Probook 450 G2: SSD & RAM Upgrade

  Hello.
  
  I want to improve my drive 750 GB (5400 RPM) to Samsung EVO SSD 250 GB and 8 GB to 16 GB of RAM, but I don't know which model will fit for my HP probook 450 G2 Intel i7 5500U 2.4 GHz. Maybe someone help me?
  
  Pictures of my back of pc:
  
  

  

  

  @Lumiatrix

  Buy the same type of memory you have in the picture.

  The SSDS works perfectly.

  You have the option to add a card SSD m2 also.

  Your manual here.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04763183-2.PDF

  HP ProBook 450 G2 portable PC - videos to remove/replace

  http://h20464.www2.HP.com/results.htm?SID=6943826 & MEID = BFEAE0A5-A6BD-4541-BA9F-32A9F9567EFA

  REO

• ProBook 4740 s: new RAM not recognized...?

  I have an old but functional 4740 s Probook, always running on 4 GB of memory. Is no longer worth (especially running programs using a lot of memory as GIMP), and with the upgrade to Win10, I decided it's definitely time to upgrade memory. The max memory for this model is 8 GB.

  According to data IO could find online, I bought Kingston KTH - module X3CS / 4G memory, specified for HP/Compaq. I inserted the memory as far as I can tell, but it does not appear as being recognized. I run the Windows memory checker and found no problem.

  Can anyone suggest what I might hurt?

  Memory module specifications are given as follows:

  Kingston 4 GB DDR3 1600 MHz specific system brand HP SODIMM

  On the Kingston site the Probook s 4740 is not specifically reported as compatible, but they list any of this model. Elsewhere online (IE on thousands of websites of seller) it appears as compatible memory.

  Thanks for any help!

  The most likely cause is that the two modules are not exactly identical.

  It is an essential element of the recommendation that I propose to members who want to upgrade.

  If you want it to run as expected once the new modules are connected, do not mix the types of module or manufacturers.

  Purchase of of another memory identical bar and you shouldn't have problems to start at 8 GB memory acknowledged.

• G3 ProBook 450 (p5s63ea): Probook is g3 450 compatible bx100 Crucial SSD 120 GB

  I bought g3 ProBook 450 (p5s63ea) and changed 500 GB HDD to 120 GB SSD Crucial bx100.

  And I have following problems:

  (1) bios does not see SDS each time. I tried to reboot several times SDS, place the drive back hard, and sometimes he'll see. If she begins to see I can install Windows 10 on it and if I reboot or shutdown 10 correctly portable windows will see SDS all the time and there will be no problem.

  (2) problem arises when I do sleep for laptop and wake him up. When he wakes he appears with the picture, but hangs and does not allow to enter the password. If I remove the obligation to enter the password after waking up upwards Win 10 wake up in windows, he hangs up after 2 seconds. I tried many solutions, I found here about problem of awakening, but nothing helped.  If he hung up only remains to press on the button / stop for 3 seconds and stop feeding, but after that arrises problem 1 - notebook see SSD with operating system.

  If I install the same copy of windows on the original HARD disk 10, he wakes up after sleep perfectly. Crucial Bx100 has lates firmware mu02.

  Therefore crucial bx100 120 GB SSD incompatible with g3 450 probook?

  Solved this problem by buying a new SSD on slot m2. It seems to work and wake up stable.

  Know this subject publish when you plan to upgrade HDD 2.5 "SDS. At least not all SDS is compatible with mobile HP.

• HP probook 4540 s: dual boot 4540 with SSD and HDD

  Hello world

  Recently, I replaced my HDD with a SSD on my HP probook 4540 s

  Using a HARD drive enclosure, I installed the SSD on the slot of the hard drive and the HARD drive on the DVD drive SATA connector

  the two hard drives have win 7 professional 64 bit

  When I turn on the laptop, the OS on the SSD starts and I see the HARD drive as a storage drive

  Thus, from a material point of view, everything works fine

  now, I would like to use two hard drives with the ability to use win 7 times of SSD and HDD

  to boot from the HARD drive, I tried to change the boot order put the DVDrom before the hard drive, but it did not work

  any suggestion\software tool which may help?

  Thank you very much

  Giuseppe

  @Giuseppe1:

  To do this, you must choose a single installation as the default and change the BCD in this one to include starting in the installation of other.

  Installing Win7 on the internal HARD disk is the best choice because he will always be there.

  That change, download and install EasyBCD from Neosmart Technologies.  It is a tool on the menu to change the BCD.  It is safe to download and use, as I use it all the time.

  Once installed, follow these steps:

  (1) run EasyBCD

  2) click on the button Add a new entrance on the left

  (3) in the section on the right operating system, click the Windows tab, and then select the drive that contains the OTHER Windows startup

  4) click the button Add an entry

  Now when you reboot your machine, you should see a menu with two entries - one for each version of the windows OS.

  Good luck

  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.

  I'm a volunteer and I do not work for, or represent, HP.

• HP Probook 5320 m hp keys of access fast works do not for example brightness

  Hello

  I am new to these forums and so don't really know how these words accurately.

  I have a probook 5320 m running windows 7 ultimate 64-bit and the function keys f1 = f12 does not work. I read in another forum that you download utility access keys fast hp. I did and thankfully most work, but one that is the most important for me is not for example the brightness keys.

  in another forum, someone entered the services and management of the computer and restarted hphotkeymonitor, yet once I tried this but I had no luck what so ever. all that appears is a small bar which is empty, showing the symbol of the Sun (brightness).

  Can someone help me please to solve this very annoying problem?

  Thank you

  Hello:

  Have you installed the Intel chipset installation utility and the applicable graphics driver for your model?

  Normally, the brightness is stuck on max and you can't change it, unless those who are required, the drivers are installed.

• ProBook 6570b: VTx is enabled in the BIOS but does not work

  Hello

  I use ProBook 6570 b after update, with Win 7 Profesional 64 b (a second) i'm running a bios F.62 Rev.A April 7, 2015, that I got from HP support web site. I activated the VTx in bios but its seems that this is not enabled (the Microsoft virtualization detection tool used).

  I turned the PC out to the battery, expected 15 min, upgrated bios 2 x and it still does not seem to work.

  Any ideas? Thanks in advance

  Hi, it fixed by uninstalling Avast antivirus, does not help turn it off, you must uninstall it.

  Thanks anyway

• ProBook b 6460, one on the side left USB ports not working not

  Hello

  ProBook 6460 b (number of lProduct: LG641ET #ABU) running Windows 7 x 64 Ultimate.

  Am I doing something stupid here, but I can't seem to get one of the USB ports on the left side of my Probook to work. If I plug something in to the nearest (to the front) of the two ports, it does not seem to get any power. The back is ok. I looked in the BIOS / OS, but can't see anything obviously wrong, so I am at a loss. Any help to make them go (I'm not quite sure that he has already worked, but suddenly feel the urge to see if I can fix it)

  See you soon

  Richard

  Hello

  I don't think that anything you have differently. USB this phone is rubbish it is to tell all my friends at work has problem with usb

  Most are left broken medium plastic holding the USB came out with 1 week of daily use.

  It's the portable work otherwise I threw out of the window.

  Syed

• ProBook 6570b: 10 Windows not recognizing display

  Tried to upgrade to Windows 10 after having received assurances from the MS and HP as my phone is compatible at 100% and I tells me that the screen is not compatible.  Not sure why there is NO mention of this question anywhere?  Maybe I should come back to buy Lenovo as they have decent driver/support?

  @sirparkinson

  Check the Device Manager.

  The paper in my previous post explains.