HP recovery new hdd

Similar Questions

• OK - new HDD in Portege R100 & now?

  Hi there - I powered my R100 with a brand new motherboard and now I have a new HDD 40 GB toshiba in factory condition.
  I have never installed a recovery that retrieves the XP (only more older Portege models with 2000 or 98).

  Q: should I prepare the new HDD before runnning my original XP Recovery or build in the new HARD drive and start the recovery?

  > Q: should I prepare the new HDD before runnning my original XP Recovery or build in the new HARD drive and start the recovery?

  No, you n t need to prepare the HARD disk before execution of the installation OS recovery configuration will format the HARD drive and reinstall it all automatically.

• Installation of a new HDD in the Satellite 4320 Pro, advice?

  I need a new HARD drive in my baby, his old HDD is clicking and whirring and apparently not in good health, more since I installed Windows XP with service pack 2 I can no longer hold my programs on the tiny 6 GB thing!

  I was wondering if you wonderful people out there can help me by answering my questions:

  1. is there a limit on the size of the HARD drive that my ' 4320 Pro can take, if there is a limit (for example, 10 GB) so can I upgrade the BIOS to allow for a more generous size (say 40-80 GB)?

  2. is it difficult to remove the old HDD and then put the new? Has anyone else done this procedure before? Should I take my baby into pieces? I installed the new memory before and had no problem :), it was very easy it will be that easy?

  3. What is the depth of the original 6 gb 2.5 "HDD in my little girl? The replacement of all them seem to 9.5 mm deep will take a kind of foam spacer if for example my old HDD to 12 mm?

  4. Finally someone noticed problems once they have installed a new HDD on there Sat Pro?

  Thank you in advanced for your wisdom.

  :)

  Hi Stu,

  In response to your questions: -.

  1. most computers manufactured since the end of the 1990s can accommodate the larger discs, I found several supplies citing disks > 40 GB for your model. Any restrictions imposed by your BIOS could be corrected.

  2. remove the HARD drive is relatively simple and will generally involve nothing undo more than a few screws. Most hard disks are held in a caddy of some kinds and this will have to be transferred to your new drive. You must locate your current HARD drive (it must be under a Panel on the side or your laptop. Note that some models locate the HARD disk in the optical drive, so you may need to remove this first.

  3 hard drives usually come in two sizes, 2.5 "and 3.5", this refers to the width of the player. the real depth is largely irrelevant, since it will be held in a caddy. You certainly should not wrap the reader with the foam.

  4. I replaced my drive HARD original with an 80 GB version. The process took less than 10 minutes, and then I just rebuilt my system from the product recovery discs before restoring my data on a backup CD.

  HTH

• Need new HDD for my Satellite C855 1RL

  My drive hard internal is not read and was told that I need a new. Where can I buy a new HDD for a Satellite C855 1RL, and what kind of money it costs. I have the recovery disks

  Thank you

  You can buy new HARD drive in every store of the computer. What you need is 2.5 "SATA HDD.
  In my opinion you should now reflect on the upgrade and buy SSD that will offer more performance and make your laptop run much faster than before.

  Talk with your dealer ad pick up some useful information about the HDD and SSD upgrade Exchange.

• Cloned new HDD for Pavilion 1210.uk does not start

  I am new to the forum so Hi everyone.

  I just installed a new HDD (SATA) to my office. BIOS identiified unit correctly and I cloned using HDClone software. He succeeded with 0 read and write errors. All files are accessed through drive letter access. So far so good, I thought. I then tried to boot from the disc again by changing the BIOS boot order. Hoewver, when the trunk begins with the new PC HARD drive crashes with a white/black screen with the cursor blinking in the upper left corner. It is the logo of Microsoft and o/s linen starts (XP).

  Some additional information:

  * Old HARD drive still boots without problem with or without the new drive.

  * I changed the transfer rate of 3.0 GB to 1.5 GB being the SATA 2 drive. That made no difference, then changed back.

  I don't know what is wrong, someone has also experienced this or knows what is the problem?

  Thanks for reading.

  The cloned system was not built with PATA and SATA drivers.  This could be the problem. You still get the blinking cursor?  You can send an email to technical support HDClone and ask of PATA, SATA problem of cloning.

• Can I install new HDD on the Oem computer?

  original title: product activation

  my hard drive makes very strange sounds, I think that its on its way. I have vista installed oem (I have the dvd) I would be able to adapt to a new HDD and reinstall?

  Hello

  Yes; under the rules of OEM, you can replace the hard drive and reinstall the operating system on the same computer.

  This is the information on the rules:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=iePP5a9JaWJ

  And if you have problems with the reactivation, take the option phone, do not follow the guests of the car, but brace yourself for a real person explain to the.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• laptop G62-b98ED: 0xe0f00013 during recovery (new hard drive) error code

  In the HP Support Forum Iread the code 0xe0f00013 error during recovery (new hard drive).

  In this article, I go the Digital River en download Windows 7 Home site (http://msft.digitalrivercontent.net/win/X17-58997.iso)

  Unfortunately, this link is broken

  ("The Page or file you requested cannot be provided

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
  Error HTTP 404 - file or directory not found. »)

  In ths page I be called Micrrosoft to download on their site. After typing the registrationkey it says:

  'Product not supported '.
  The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the software device for recovery options. " »

  You have a different link to download the ISO of windows 7 Home Premium?

  I have not personally used this download link, but they seem to have good answers/responses from users it and 33K followers on Facebook.

  http://getintopc.com/softwares/operating-systems/Windows-7-Home-Premium-free-download-ISO-32-bit-64-bit/

• Satellite A205: New HDD - error after recovery

  I replaced the hard drive in the Satellite A205 and used the Toshiba Recovery and disc drivers/Application to re - install the drivers and Windows Vista.

  However, when the recovery ends and the windows starts for the first time, I get a message: Windows Setup could not configure Windows to run on a hardware on this computer.

  The new hard drive is a Western Digital 500 GB SATA.
  Is there a conflict with the new hard drive?

  Anyone have any ideas?

  Thanks for any help.

  Hello

  It might be possible that there is a conflict with the new HARD drive.
  Try to start Windows Vista is SafeMode (F8-> safe mode)
  Is this possible?

  You can also try to repair the system.
  F8-> fix my computer

  Another question:
  Have you tried to install the system using Microsoft Windows disc clean?

• New HDD for system recovery DVD

  My Pavilion dv4-1225dx Entertainment Notebook has experienced a hard drive crash.  I replaced the hard drive with a new WD Scorpio Blue 2.5-inch 500 GB SATA drive.  I got HP System Recovery DVD to reinstall the operating system Windows Vista Home Premium SP1.

  I need to use my DELL desktop computer and use this is the DVD drive to copy DVD recovery system in a 16 GB Flash Drive from the lodge doesn't have a DVD player.  I'll be able to use the Flash drive to download the operating system Vista system recovery on a pavilion with a new hard drive?  I have HP doing something for the hard drive before the recovery can take place as the hard drive partition and add HP coding?

  As a question, is possible to buy MS Windows 7 and load the operating system on the hard drive, I installed?

  Stephen Sutor

  sutors says:

  My Pavilion dv4-1225dx Entertainment Notebook has experienced a hard drive crash.  I replaced the hard drive with a new WD Scorpio Blue 2.5-inch 500 GB SATA drive.  I got HP System Recovery DVD to reinstall the operating system Windows Vista Home Premium SP1.

  I'll be able to use the Flash drive to download the operating system Vista system recovery on a pavilion with a new hard drive?  I have HP doing something for the hard drive before the recovery can take place as the hard drive partition and add HP coding?

  As a question, is possible to buy MS Windows 7 and load the operating system on the hard drive, I installed?

  Stephen Sutor

  1. Yes, AFAIK to restore it without problem. You can make a recovery of the HP DVD bootable USB key, simply copy the files will not make the USB bootable, it needs to be. You can buy a usb DVD drive to use the HP DVD recovery

  2. Yes, as long as you have a W7 product key. I recommend the upgrade, these are W7 drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3860437

• Recovery & T43/p 2668 - Q1U new HDD rescue doesn't install, no WinXP?

  Hello all,.

  Just installed R & R 100 GB Hitachi again, got 2010 error I knew would happen until the update to the BIOS. Anyway, shouldn't go to Windows after the installation is complete? Everything starts with R & R once again. Also additional disk keeps saying bad disc but certified Lenovo as a whole. I ignore the process? Any help much appreciated.

  Thank you

  Donald

  Greetings to new George,

  Everything works. To be 'Incorrect disk... '. "on 1st try, I swapped the optical drive with a T42 pending reconstruction.  After 2 pm., perfect.

  I'm going to watch for this cup of coffee somewhere: smileyvery-happy:

  Thanks again,

  Donald

• Satellite M70-151 - not possible to install new HDD

  Hello

  I have a problem with my Satellite M70-151. bunch of old hard drive (100 GB Hitachi) reached the Windows XP screen then just ends with a blue screen a turn off laptop, immediately. I had to restore my data with an application file-rescue of another PC. It was not possible to start from old hard drive yet.

  Then I bought a Western Digital SATA II 250 GB hard drive that put my Windows XP CD in DVD player installed and tried to start. The laptop turns off as soon as the laptop computer tried to access the HARD disk.
  Thought, it was question of SATA II disk and tried a Samsung 160 GB Sata I - same result.

  BIOS recognizes the correct drives.

  If I try to boot from old hard drive, it shows the issue I mentioned first, but as before it reaches the Windows XP Boot screen before moving on to the blue screen before turning off the laptop. So start goes further than the boot with new hard drives

  The Windows XP CD I used is not the restore CD that came with the laptop, but a normal license.

  The heat is not a problem, I cleaned the CPU fan there is enough space to breathe the cold air mobile, the temperature is ok.

  * My questions are: *.

  Is there any special application running on laptops satellite, like special software of Toshiba, perhaps Backup, should I be aware of?
  What I need to preformat the hard drive, Toshiba-Hardware will recognize the hard drive?

  It would be great to get help on this issue, because I'm out of ideas. Thanks in advance!

  André

  Hello Andrew

  This behavior is very strange. I have some old Satellite M70-159 with 100 GB HARD drive. I also tested how it will work with a 250 GB HARD drive and all is well.
  On two drives, I have installed WXP using the Toshiba recovery image.

  I answer your two questions No. to install Windows XP Home edition on this model of laptop you don't need some special Toshiba application or a piece of software.
  HDD should be recognized correctly by the BIOS and the Windows XP Home edition installation procedure should work well.
  What you can try is to set the BIOS to the default settings and try again.

  The strange thing for me is that judgment. The blue screen tells me that there may be some serious hardware problem, the HARD drive controller might be. It's really not easy to say with certainty what can be the problem.

• Satellite P35-S609 - new HDD not accepted

  Hello

  I am trying to install Windows XP (toshiba recovery CD) on a new hard drive Samsung HM160HC (160GB) on a Satellite P35-S609 but once the CD format the HD and copy all the files on the hard drive (to start installing XP) laptop does not boot from the hard drive, someone has an idea?

  Obviously, the drive has no flaws, perhaps the bios V1.4 takes not more than 100 GB HD or I don't know if this is the limitation of Windows XP, the thing is he isn't still trying to start the start of HD - anyone have any idea?

  my email:
  [email protected]

  Hey Buddy,

  Your new HARD drive is recognized in the BIOS?
  You can install Windows on another drive?

  Satellite P35 has old IDE interface and generally it s limited to 128GB HDD (> 120 GB). If the HARD disk is not recognized you use a 120 GB HARD drive only.

• Satellite L670-1john - recovery Will HDD work if I leave the D partition?

  My laptop is L670-1Jn

  On my drive C: is installed windows
  On my drive D: is installed HARD drive recovery

  With windows 7 I want to create a new partion E: on my D: drive
  The E: partition will be reserved for my data.
  Once create E: partition I want to do a picture disc C: and D:

  Serious problems:
  first I used first HARD drive recovery
  If that doesn't work I'll bring disk C: and D: images

  My question is: HDD recovery works if I create a new partion E: on my D: drive?

  Hello

  To be honest, I've never tested it, but I think that you should be able to use HARD drive recovery, even if the partition D has been changed, but that's just my opinion.
  So before you change anything on the HARD drive, I recommend you create the recovery disk!
  The recovery disc helps you define the laptop (and also HARD drive) back to the factory settings if anything went wrong with the HARD disk or similar

  With recovery disk, you are on the safe side you know
  I think you can run a series of experiments after the recovery disk was created.

  Please share your experience with us, I m very interesting.

• a230n new HDD needs refurb

  Hello

  I have a desktop HP Pavilion a230ngift. (win XP Home Edition)

  I bought a set of recovery disks for my a230n and I now need to get a new and preferably improved

  Hard drive.

  I was told that I need to get a hard drive with a PATA interface.  the original hdd on the models support site is:

  dashdash,

  All these drives use what is commonly called a flat sheet Parallel ATA.

  http://en.Wikipedia.org/wiki/Parallel_ATA

• New HDD in my Satellite Pro M70 shows 55GO only

  Well, I put in a new form of HDD Samsung in my Satellite Pro M70 model PSM75E. It has a size of 320 GB, but it s only showed like a 55 GB of hard drive.
  How can I solve this problem, my system is Windows XP with SP3.

  Thanks for your replies

  Hello

  You must format the HARD drive to NTFS and should create a new partition.

  Welcome them