HP simple pass is not grateful fingerprints already registered

Similar Questions

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• Simple pass does not record Web sites visited or passwords

  My Simple Pass is not Simple!  Occasionally will pick up the web sites visited and ask if it needs to store information and the password.  In this case, Josette.  How should I do for each site visited with a password, it will store it?  Thank you

  Retirement, try here.

  http://Windows.Microsoft.com/en-us/Internet-Explorer/fill-in-forms-remember-passwords-AutoComplete#IE=ie-11-win-7

  REO

• simple pass does not work to open emails

  simple pass does not work to open emails

  Duplicate the content of the Post-

  My os is windows7 IE9 browser

  Pass Simple contact support.

• HP Simple pass - detects not fingerprint reader

  Hello

  This is my first post so I apologize if it appears in the wrong place. I'll have a problem with the fingerprint reader and HP simple pass identity protection software that came with my Dv6-3121nr. For some reason any all of a sudden since this morning it will not work. There is no light on the sensor, and it fails every time and movement. When I run the single pass software and go to the fingerprint section, it shows the fingerprint reader is not connected. Interestingly, when I go to Device Manager I see no biometric devices listed under there. I read on another thread that some options below biometic devices in Device Manager solves the problem.

  I already tried pass Simple uninstall/reinstall the Recovery Manager and also uninstalled and updated validity sensor but still no go.  Here are some other details:

  Laptop model: Dv6-3121nr

  Operating system: Windows 7 premium 64-bit

  Paleoclimatology sensor DDK version: 4.1.139.0

  I can't find any other information on how to solve it. Can anyone help?

  Thanks a bunch!

  Hello SM1251,

  I looked at your laptop and there is no Windows 8 drivers for it.  Have you tried to install the driver of Windows 7 in compatibility mode?

  1. Visit the HP Support and download the Windows 7 drivers for the hardware that you want to try.
  2. Download the driver to your desktop.
  3. Allow extraction until the complete but close the installation process, when it comes to the top.
  4. Navigate to the C:\swsetup\ folder.  You will see your driver listed here.  They usually have a name such as "sp48918".  Navigate to this folder.
  5. In the folder of your driver, you will see a file "setup.exe".  Right-click on this file and select Properties.
  6. Go to the tab "compatibility".
  7. Click on the box that says "Run this program in compatibility mode dethrone" and also select Windows 7 in the menu dropdown.
  8. Check the box that says "Run this program as an administrator", below.
  9. Save these changes, and then double-click the "setup.exe" to start the installation.
  10. Once installation is complete, restart your PC and check the functionality of the hardware.

  Please let me know if this helps solve your problem.

  Good luck!

• HP Simple pass does not properly.

  I just bought a HP Envy 17 TS last Friday. And the finger print scanner does not work properly. On the basis of the recommendations of the Forum of Microsoft, I deleted and updated drivers for both the pass Simple biometric and HP.

  Here's the situation. HP Simple pass works for passwords of website and all but don't work try to use it to connect to windows itself. However, if I uninstall use the print and Pass Simple unlock this 8.1 of Windows has its own, it works. Pass Simple to reinstall and it stops working again.

  dmcbain,

  Welcome to the HP Forum.

  There are a lot of Envy 17 over there - I think left, unsaid and you details give a better idea - it should be sufficient because they are similar in nature (structure and file locking).

  It is likely that your laptop came with HP SimplePass version 8.x installed - it's the Softex version and it should work pretty well, and he would be able to get along with native login provided with Windows 8.1.

  You could try the following to see if you can get things back in order.

  Reminder: For best results, do not skip a recommended reboot sequence.

  • Make sure that all of your Windows updates are complete and up-to-date.  This is essential.  On a new system, it takes a few laps and restarts.  Once updates are complete, you can, if you like to put updates 'Notification' for the future.  If you install a new Windows updates, restart the laptop.
  • If you have not yet, download install .NET Framework 4.5.1: Microsoft .NET Framework 4.5.1
  • If you install the framework, reboot the laptop and connect
  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8
  • Start > type anywhere 'rebecca' or Recovery Manager >
  • Click here to start the Recovery Manager > under "I need immediate help" >
  • Drivers and reinstall Applications > find and reinstall your driver fingerprint sensor fingerprint validity
  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  Consider: you can probably run the version of HP SimplePass 6.x on this system - it is AuthenTec version, fully functional in terms of features and support webcards and Windows logon, too.

  See the following to download and install HP SimplePass version 6.x.  You can skip the part about reinstalling your fingerprint driver - you have completed this step.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  HP will never call on the phone and ask for money to 'secure your PC.

  Say "No, thank you," and hang up.

  Cybercriminals can call you on the phone and claim to be from Microsoft.

  See: Microsoft Safety & Security Center

  Mark my answer "accept as Solution" when providing a solution or workaround!

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• HP Simple pass does not not windows 8.1

  I have a computer portable quad edition of HP Envy 15

  I've updated my HP simple pass to this day and still I could not use wisely!

  I could never save all Web sites with it or connect to my pc with it!

  So, I uninstalled it in the programs list in the control panel!

  now, I am unable to reinstall it correctly. the State of message "Failed operation program" keeps coming back!

  I don't know that I download the software right simplepass! I need help to know where to find the client software and to help me use the fingerprint reader to connect to Web sites and in my pc!

  Cyril

  Try this... it should work

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64339.exe

• HP Simple Pass: Does not allow widows connect you

  I just bought the HP ENVY 17. The simple HP goes I put my fingerprints and the web attempt to connect you but nothing has worked. I tried logon windos, but it doesn't work anymore. The Palm with the fingers are not displayed and now afer disable all the options I tried to activate the logon windows again, but he said tha the password is wrong a TI is not. In addition to this in the biometric devices section, it says that I don't have a finger print reader.

  How do I trouble the HP simple pass or restart?

  Hi KN26,

  Yes, go ahead and uninstall it first.

  Thank you

• simple pass will not let me analyze my finger

  HP simple past is installed and running, but it will not let me analyze my finger guard telling me to try again but doesn't give me anytime to do.

  HP Envy DV6 7211TX laptop

  HP Simple pass the version of the driver = 8.00.51

  Downloaded from http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124010-1&cc=us&dlc=en&lc=en...

  I uninstalled the HP provided drivers and allowed one from windows update Windows Installer. Which corrects the problem. I am now able to read my fingerprint.

• Simple pass does not not on an ENVYdv7

  My school e-mail admin apparently disabled my Simple Pass.  I set myself since my student email to forward to a regular e-mail account so I don't have to go to this site.  How to re - activate the Simple Pass to connect to web sites?  The simple collar works under IE, but not in Chrome.

  MBrown,

  Unless something has changed in the last few days, Chrome V29.x may not work with HP SimplePass.  Apparently, the problem is related to the way in which Extensions are used.   According to one user, Chrome said "it's not their fault.  The redone problem surface with a version of Chrome V29.x, who was apparently released in the last week of August.

  I can offer the following:

  EDITS 21 Sept 2013 ===============================================================

  HP has released a version update HP SimplePass on 18 September 2013.

  The updated SimplePass version would have been solves the problem with HP SimplePass and Chrome.

  Chrome and HP SimplePass V6.0.100.272 workaround

  has been replaced by:

  Chrome and HP SimplePass V6.0.100.276 fix

  What follows still applies:

  Simple Instructions for upgrade HP SimplePass

  ================================================================================

  I hope this helps and that you can access your email again.

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts to help you.

• I forgot my password, simple pass does not read my finger

  I can not connect. I don't remember my password, I can't use a simple pass.

  Initially, the cell will have the recovery Partition and that would give you an option to create a recovery disk set. If you have not created these recovery discs when the laptop was in working condition we can do right now

  From now if you need to recover your laptop through the new operating system, you can check if the recovery Partition

  is a condition in a work, or not, if yes you can easily recover/restore your laptop

  If the recovery Partition is corrupted

  You need to call HP Support and demand for a set of recovery disks, then you can recover/restore your laptop at the earliest

  OR

  You need to call Microsoft and buy an operating system with the license key, so that you can recover/restore your laptop at the earliest

  Please Contact HP Support by phone for help without delay

  You can check your warranty here to check the status

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Have to keep laptop computer restart as simple pass will not let me connect to internet sites

  Half the time I try to sign into my favorite sites with log-ins that I type in my information, close go, tap NO to do simple pass I want to add to the list and then nothing happens. If I press the sign in again then simplepass opens again and nothing happens until what I restart my laptop then its usully OK again.

  Can I safely just uninstall simplepass without creating problems to come as if I didn't use it anyway.

  HP Pavilion 17 laptop

  Product F7R63EA #ABU number

  Concerning

  stuland

  Hello

  You can uninstall HP SimplePass as usual since entering programs and features - when the uninstallation is completed, restart the laptop.

  If you ever want to reinstall this software, you can download the installer from your pilot books page here.

  Kind regards

  DP - K

• Upgrading Lr5 to Lr6, serial number not recognized Lr5 (already registered).

  I downloaded LrCC/6 to upgrade my Lr5 Lr6 to, but the upgrade can not progress because my serial number Lr5 is not recognized - says its an invalid number.  I go to my Adobe profile and it does not show on my account in the registered software, yet when I try to register my serial number of the Lr5, he said that the number is already registered.  I think I have created a different Adobe account when I bought, installed and registered Lr5 and tried to connect with the old info e-mail address and the password that I wrote on my box Lr5 - without success.

  So now what?

  Do you provide the serial number for the new version before trying the LR5 serial number?

• picked up a photoshop cs3 to a succession of person who typed in the serial number passed.i and wrote its already registered.can I use this program.will it wirk.thanks, mike

  Picked up a photoshop cs3 to a person who has died. I typed the serial number in and says its already registered.can that I use this program.what do, I have to do.thanks, mike

  You may need to transfer the license, transfer an Adobe product license

  [moved from Creative cloud download & install download, installation, commissioning]

• HP envy 15-j067cl Simple Pass does not work

  Just bought Envy 15-j067cl yesterday with the fingerprint reader, which I've never used it before.  I did all the updates of Windows 8 and then upgraded to level to Windows 8.1.  I uninstalled Norton, using the removal tool, because I have a current subscription for other security software.  I tried to find a way to implement the Simple collar, which is what I understand how to set it to use my fingerprints.  I was unable to put in place.  I checked for Validity Sensor Device Manager and saw the yellow exclamation with this message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "

  I checked this site, saw a suggestion for drivers of HP recovery, so I did it and now the validity sensor does not show in the Device Manager.  It shows only as "unknown device - another device."  How can I fix it?

  Hello

  First, if you haven't already done so, install the driver from Chipset 8.1 on the following link.

  Chipset Driver - Windows 8.1

  When this has completed, restart the laptop.

  Then see if you can install the following Validity Sensor driver.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63418.exe

  Kind regards

  DP - K