HP v220w 16 GB pendrive is write protected

Similar Questions

• Fix the Flashdisk write protected

  Please, how do I fix my Kingston D101, 8 GB (= 0011 VID, PID = 7788), it is necessary to format but protected write (before he write protected my flashdisk was attacked by one / or several viruses and I clean it with antivirus SMADAV.) I don't know what is the virus but its been a lot of strange folder)? I try Fc Mptool but I don't understand how to use it. Thank you. Sorry bad English.

  Hello

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it. Write protection is an element of protection which prevents accidental deletion of important data.

  If you want to remove protection, try the advice given:

  Method 1:
  I suggest you to follow the steps and check if the problem persists.

  a. open 'My computer'.

  b. right-click on the USB key and select'Properties'.

  c. uncheck the 'read-only' if it is enabled.

  Note: Click Yes when the option appears saying 'apply changes to subfolders and files writable in this folder '.

  d. click on 'apply' and 'Ok '.

  e. try to delete the files.

  Method 2: I also suggest you follow the steps to edit the registry to disable the write-protected error and check if the problem persists.

  You can remove your usb pendrive write protection using the method below:
  a. open the start menu and select run. On the runline, type regedit and press efriendship. This wil open theRegistry Editor.
  b. navigate to the following location:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  Note:

  If StorageDevicePolicies registry key does not exist, you must create it manually.
  c. in the right window, double-click the registration key and set the value to 0 in the value
  Data area , and then press theOK button
  d. restart your computer and try todeletefiles from USB flash drives.
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  For more information about how to back up and restore the registry, proceed as in the article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information helps.

• USB key is always write protected even if the value is zero

  WHEN READ VALUE IS SET TO ZERO PENDRIVE NOT REMOVED THE WRITE PROTECTION

  Hello

  1. Are you having the same problem, if you connect the USB to different computer?
  2. Are you having the same problem if you connect different USB key to your computer?
  3. What is the brand and model of the pen driver?
  4. Have you tried making the virus for USB scan?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it.

  Write protection is an element of protection which prevents accidental deletion of important data. Sometimes turning off the write protection is as simple as uncapping the USB key to find a manual switch. If your player lacks an external switch, the procedure requires a few steps to complete.

  (a) turn on your computer and plug the drive after that your operating system is loaded.

  (b) open 'My computer' and the list of readers of research until you find your USB drive letter

  (c) right click on the name, then click 'properties '. Browse the tabs until you see the option to remove the write protection. If this does not work, proceed to the next step.

  (d) visit the website of the company for your USB key. Go to the help or support section and search for "write protect".

  (e) search the Internet for software that will remove the write protection. Download the program and install it on your computer.

  (f) open the software. Follow the instructions to remove your USB write protection.

  I also suggest you analyze your USB key with the Microsoft Safety Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

• Write protected problem

  I have a 8 GB USB Flash Drive from Microsoft Support so that I could (with assistance here) reinstall Windows 8.  The installation went well and now I want to use the Flash drive for other purposes.  Whenever I try to reformat the hard disk, I get the error message "... write protected '. "How can I change the status of the flash drive write protected?

  Dell XPS 8500 Special Edition, Windows 8, IE 10, connected to a hub Flash drive powered 4-port.

  Thank you.

  Hi NurdBurd,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the flash player that you are getting an error message "Write-Protected". I'll be happy to help you with this problem.

  -Did you do changes on the computer before this problem?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it. Write protection is an element of protection which prevents accidental deletion of important data.

  If you want to remove protection, try the advice given:

  Method 1:
  I suggest you to follow the steps and check if the problem persists.

  a. open 'My computer'.

  b. right-click on the USB key and select'Properties'.

  c. uncheck the 'read-only' if it is enabled.

  Note: Click Yes when the option appears saying 'apply changes to subfolders and files writable in this folder '.

  d. click on 'apply' and 'Ok '.

  e. try to delete the files.

  Method 2: I also suggest you follow the steps to edit the registry to disable the write-protected error and check if the problem persists.

  You can remove your usb pendrive write protection using the method below:
  a. open the start menu and select run. On the runline, type regedit and press efriendship. This wil open theRegistry Editor.
  b. navigate to the following location:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  Note:

  If StorageDevicePolicies registry key does not exist, you must create it manually.
  c. in the right window, double-click the registration key and set the value to 0 in the value
  Data area , and then press theOK button
  d. restart your computer and try todelete files from USB flash drives.
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  For more information about how to back up and restore the registry, proceed as in the article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  If you need help with this question or any other worm protection related issues, keep us informed. We will be happy to help you

• USB Thumb Drive (UHYBS-064GH) format/write protection fault

  Hello

  Hoping for help.

  Bought a 64 b USB Thumb Drive (UHYBS-064GH), a private seller, but the point is brand new in packaging.

  When I tried to copy files through him, he maxed out at comments 45Gig and seems to have caused a clerical error. I was able to remove the majority of the cases, however on 5gig of them would not remove (in that they seem to have removed, until you updated).

  To counter this, I tried to "quick format", the drive (using Windows XP SP3), but the disc is write protected and I am unable to remove it.

  Spoke to a friend who told me that I should try a low-level format, which tried & it seemed to work, however when I insert the USB system indicates that the drive is not formatted & I would like to format. When you click Yes, I get the error 'write protected '.

  Was the question of the google machine & even tried to change registry settings, but also failed.

  So I hope someone out there has a solution for me (which does not include a big hammer & some anger management)...?

  Would it be possible that this USB drive is defective?
  In my opinion, you should contact the merchant and must replace it with another.

• Pen drive write protected

  Recently, I bought a sony 3d led. I got a 8 gb Flash DRIVE free with her. It is pre-loaded with film in 3D MIB.
  I want to format this USB key so I can use it for other purposes. However, when I format it, it gives an error - "this disc is write protected."
  Please help me to remove this this USB write protect.

  Hi vipsolan,

  Let us know the model # of the Flash DRIVE that you use.

  Insert the USB into the computer, right click and select format. Try changing the file such as NTFS or FAT format and verify if works.

  If my post answered your question, please mark it as an "accepted Solution".

• How can I write protect a USB

  I have an external USB formatted drive for Max OX extended (journaled). He has a backup of my music collection so I want to write protect it so that it can be READ and not deleted or all files deletion. How this is possible - running an iMac and El Capitan.

  I've tried right-clicking on the drive and the subfolders in the Finder and by changing the attributes of read/write READ ONLY for me and all the world, but I can always delete individual files.

  Thank you.

  You must disable the attribute "Ignore permissions" on the external hard drive. Just do a Get Info (command I) command on the volume desired in a Finder window and then downstairs there is a checkbox Check titled "Ignore permissions on this volume" - uncheck the box so that the ownership rules are now used for its content, then the privileges you set for those who can read and write should be respected.

  Note that this applies only to external volumes that I think - the internal disk volumes does not have this checkbox "Ignore permissions" is checked.

  Good luck...

• USB Flash Drive 16 GB Write Protected v210w

  Hello!

  After a week of use, my new USB Flash Drive 16 GB v210w key appears as write protected.

  Cannot add a new file, delete the old file, same format any USB Flash drive.

  I have tried various procedures described on the forums, as

  • My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePoliciesWriteProtect > data of the value set to 0
  • \devise\harddisk1\dr2

  and the normal formatting (properties > Format) and the low level of implementation in the shape tools, as

  • http://www.Softpedia.com/progDownload/HDD-low-level-format-tool-download-37794.html
  • http://www.Apacer.com/en/support/downloads/Repair_v2.9.1.1.zip
  • http://www.transcendusa.com/products/online_recovery.asp
  • HP USB disk storage format SP27608 tool - 2.1.8.exe

  but in vain.
  
  That's happened? How to resume normally using my USB Flash drive?

  I use a mini 311c on XP SP3.

  Thank you for your help and best regards.

  
  -rei_vilo

  Hello!

  Get help from hp support.

  The technician suggested I make a test disc with http://panasonic.jp/support/global/cs/sd/download/sd_formatter.htmlformat.

  He failed and prompted the 'Protected disc' message, so my USB Flash drive was considered dead.

  I went back to my dealer and proceeded to an Exchange. The dealer was not surprised: according to him, large USB Flash Drives seems to be subject to this kind of malfunction.

  I hope to be luckier with the new!

• HPE-470f built in SD card reader reads the cards as write protected

  WIN 7 Professional 64 bit, SP 1 and all the updates, latest Bios and drivers installed, HPE-470f

  The SD card reader to work properly.  Put it in any piece now, the camera sees the chip, reports that it needs to be formatted (not true) and when he tries, then says it cannot complete.  Displays the disk disk management is write protected.  I suspect the internal switch inside the drive is blocked or broken.

  have you tried: blowing the dust out of the drive, spray of contact cleaner in the device, try several chips (all of which work well in my cameras before and after trying in the HP drive.)

  Any suggestions?

  Apart from the drive of cleaning dust and spray contact cleaner in the drive, I have:

  1 uninstalled all USB devices in Device Manager and forced the system to reinstall everything.

  2 uninstall the drive itself in the Device Manager and forced the system to reinstall.

  3 tried several cards in the reader with similar results: the system sees the card, says it has to be formatted (it was already formatted in the camera).  Formatting attempts get an error that it cannot be completed.

  4. the program of HP, but it can not format the card to be downloaded.  Reports "unable to format the device.

  I've always used player soft and methods of ejecting device to remove cards.  I think that it is a loss with a broken read/write switch.  It's too hard getting the subassembly of legacy of the case card reader.  It takes almost a complete disassembly of the machine to get out.

  Thanks for trying to help.

• Remove floppy cd - rw write protection

  When I try to copy files from my hard drive on my new cd - rw disks blank, I get an error message saying that the files cannot be copied, because the cd is write protected.

  Hello

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?

  I suggest you follow the instructions to put the CD and check if it works.

  a. open Windows Explorer

  b. right-click on the disk

  c. Select Format

  If the above does not work, perform the following steps

  d. clickStart

  e. typeregedit in the search field and press enter

  f. go toHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Storage

  g. change the value toProtect write them on 0 (zero).

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Hope the information is useful.

• SD card shows that it is write protected, how do I disable that?

  I have an sd card that has pictures on it and I want to remove them, but in trying, it say t he sd card is write only how do I cange so I can remove the photos.

  Look on the side of the SD card. There is a small switch that is write protected. Put it to the other position.

• How to remove the floppy write protection

  How can I remove write Protection from a disk 1.3 MB

  Sometimes the switch 'cursor' on diskettes 3,5 "bit was removed (to create the disk read-only permanently). If this is the case, then just put a piece of opaque tape over the 'hole' (where the slider switch was)... and you'll be able to write to the diskette.

  If you hold the diskette if you are looking at the rear, the slider switch (or a hole where was the slide switch) is at the bottom RIGHT.

  Please note that the 3.5-inch disks came in various capacities (the two most common are 720 KB and 1.44 MB. If you hold the diskette, then you're looking at the back, then there will be a hole on the bottom LEFT, which is used to indicate the command what is the capacity of the disk. If my memory is good, there will be a hole in the bottom LEFT (when you see the back of the disc), for drives with capacity of 1.44 MB, and if no hole is on bottom LEFT, then the floppy drive is 720 KB.

  My point... If you need to put a piece of opaque tape over the hole where the playback cursor / writing has been (to make writable disk), don't forget to put tape over the hole at the bottom RIGHT (looking at the BACK of the disc... and 'back', I mean the side without label and where can be seen the axis of the disc).

• How can I remove a USB write protection

  my USB is write-protected how to remove it?

  Hello

  What operating system do you use?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it.

  Write protection is an element of protection which prevents accidental deletion of important data. Sometimes turning off the write protection is as simple as uncapping the USB key to find a manual switch. If your player lacks an external switch, the procedure requires a few steps to complete.

  (a) turn on your computer and plug the drive after that your operating system is loaded.

  (b) open 'My computer' and the list of readers of research until you find your USB drive letter

  (c) right click on the name, then click 'properties '. Browse the tabs until you see the option to remove the write protection. If this does not work, proceed to the next step.

  (d) visit the website of the company for your USB key. Go to the help or support section and search for "write protect".

  (e) search the Internet for software that will remove the write protection. Download the program and install it on your computer.

  (f) open the software. Follow the instructions to remove your USB write protection.

  I hope this helps.

• How can I remove the write protection?

  I'm trying to copy a file to an sd card and it gives me that message - the disk is write protected.  remove the write protection or use another disk.

  This is the forum for anti-malware for Microsoft Security Essentials (MSE) program.

  Your question is off-topic for this forum, but see if this link will answer your question: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/remove-write-protection-from-my-sd-card/3aedb2cd-5f5e-e011-8dfc-68b599b31bf5

  If not, try: http://lmgtfy.com/?q=Remove+Write+Protection+SD+Card

  Kind regards...

• No compatible driver, drivers write protection only is not loading, the game will not play

  I have a new ASUS G51VX equipped with windows 7 ultimate.  I tried to load 1701 AD gold dir and he says TAGES Drivers (drivers write protect) need to charge, said (run as administrator), try and does not load.  Tried to do it from the folder on the cd, and I get the same results.  When I start my computer, I get a message of an incompatible driver was blocked (this driver).  Tried to fix it with the resolution of the problems of compatibility and still won't work.  Any help would be apprieciated.

  Hi chazson,

  Welcome to Microsoft Answers Community Forums.

  Please follow the steps in troubleshooting mentioned below to help troubleshoot your problem.

  Step 1: -.

  I suggest you to please check if your driver software is compatible with Windows 7 in the link mentioned below.

  Compatibility Windows 7 http://www.microsoft.com/windows/compatibility/windows-7/en-US Center

  Step 2: -.

  If the game worked very well in the previous operating system, try to run the program in the previous operating system compatibility mode.

  ·         Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Step 3: -.

  Try to reinstall the driver from the Windows Installer cleanup utility software.

   

  Emove utility Microsoft Windows Installer cleanup is a tool for runinstalled programs completely from your operating system, including programs without success.

  ·         Please visit the link below to download the Windows install cleanup.

  http://support.Microsoft.com/kb/290301

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.