HP2309m is not sometimes wake up

Similar Questions

• ultra computer window 7 not sometimes wake up after hibernation

  I am running windows 7 ultra on computer dell xps QuadCore 8300 and recently my computer sometimes wake up after hibernation when I move the mouse so I have to shut down the computer using the power button can you help me.

  Go to your control panel and go to your Power Options. No matter what plan you have selected, click on "Change plan settings", then click "change advanced settings of power."

  This should open a list of options, now click on the button '+' option of sleep and
  change the "Allow hybrid sleep" to "Off".

  Just a note, you can avoid only the computer from sleep mode hybrid, means the hard disk activity will remain intact. So the next time your windows is asleep, you can always get on easily by just moving the mouse or pressing a keyboard button.

  Please see the link below. And I believe that it is a desktop computer?

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• My HP M9500T is not always wake up...

  My PC has just recently decided to not now, this usually occurs after she slept all night... The Tower, wireless keyboard & mouse wireless all have power but the screen won't wake up... The only way I get it to wake up, is to power down the tower and the power up... It's frustrating, because he has recently started acting this way... Does anyone have an idea... I prefer not to change my power supply options, but I guess I could change where it won't go to sleep...

  Hello @koko,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post on how your desktop computer had decided not to wake recently, and I'd be happy to help you in this case!

  Although you said you were hesitant to restore your power options, I think that restoring the default power management will contribute to correct Mode operations your computer sleep. This is possible by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes

  Step 6. Press enter

  In addition, I also recommend later in this document on a dispute with the sleep and hibernation (Windows 8) Modes. This will help you configure your system correctly with the standby or Hibernation mode.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• iMac 5K (2016) will not all wake up with connected external display

  I have an iMac 27 "5K nine. My first Mac from Windows - it was a world of frustration and then most of the things I re-learned or found of alternatives for, I have a major problem of the iMac not wake from sleep. It took days to change things and we cut the field down to discover is an external monitor at the origin of the problem.

  I have a LG 23MP75 IPS monitor hooked up to 90 degrees. This is a debugging, screen bash and the cat. So I develop sites on the main iMac screen in the Sublime editor and also check the sites in the browser, and then on the external I Inspector chrome, terminal and Skype/cat stuff. When the device is connected, it works well, no problems. If she goes to sleep for a short period of time like 30 minutes or less, he wakes up. If he goes into a deep sleep (hibernation?), he don't wake. Sometimes holding the key ctrl + p + r, cmd and press work but mostly not, usually I have to pull on the power cord! for a restart. Heart-wrenching. The only solution at the present time it unplug the HDMI until I go home every day.

  The external monitor is connected through a HDMI cable that is routed into an 'active' HDMI mini-Display port adapter. I was told that the adapter is active is important after I had one active and bought assets to try to solve this problem. I read that the removal of the hibernation file may contribute to allow OS x to replace but I opened it instead and it is empty so not corrupt (sudo rm/var/vm/drag).

  If I stop and restart, the login screen is badly laid out, it has mirrored screen not extended display which is how it is implemented. See the images to compare. This makes me wonder if part of the problem is OSX being unhappy with the configuration of the monitor outside being connected?

  

  

  Here is the screen set up the config so you can see that there is nothing out of the ordinary:

  

  

  There is no strange configuration, the machine was brand new from Apple themselves, by default on the box, no restoration or something like that as I'm new to Mac.

  Can anyone offer any suggestions to fix the problem so I didn't either unplug the cable or the stop (which brings me to see the connection in horrible mirror every morning)? Any help would be greatly appreciated.

  You have 90 days of free telephone support, AppleCare, called Apple to discuss and see what solution they have? If you weren't aware that you had 90 days of support AppleCare please click on http://www.apple.com/support/complimentary/. In addition, if you haven't already, I highly recommend buying AppleCare, that extend the warranty to 3 years and 3 years of phone to provide support. If your machine ever needs repair (lets hope he never does) AppleCare pays for itself almost always on the first incident.

• Satellite U305-S7432 freezes and does not sometimes using Win XP

  Hello.

  I have a portable Satellite U305-S7432.
  Initially, it came with Vista, but I reformatted with XP Pro. I have installed all updates up to service pack 3.

  My problem is that sometimes when I try to restart the computer, simply, it freezes and does not meet any entry. I noticed that this happens if I close and then open the cover (which means that the computer goes mode sleep entry and returns).

  Please note that the splash screen works perfectly well and the computer wakes from sleep fine but then when I try to restart, the computer will simply spend time instead of restart.

  If it goes into sleep mode, reboot takes place as planned.

  I installed all the drivers and there is no question mark in Device Manager. I've updated the latest chipset from Intel (for the mobile 965) driver as well. Finally, I also tried to add /forceresetreg my Boot.ini file (as suggested: http://support.microsoft.com/kb/822624) but nothing helps.

  Any ideas?

  It is a series of laptop computers Toshiba us and you should check the Toshiba driver page for available drivers:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  If you will not find XP drivers for this page, then you can try to install unique drivers for Sat U300 since European Toshiba page but I not quite sure if these drivers XP will work on you Sat U305 Mr. but it s worth a try!

  Good luck

• HP Vista computer will enter into the 'sleep' and not to wake up?

  The computer will go to sleep while I'm on after about 10 minutes of use, and then, I am not able to wake up.  I have to turn it off and sometimes when I turn back on it will start in safe mode window.  I can't even run my antivirus because the computer did not stay long enough.  I checked the power plan settings and also tried to restore but he fell asleep before finishing.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

• Equium M50-244 does not not to wake up on LAN

  A notebook Equium M50-244 does not meet the magic packet WOL.

  The BIOS settings are correct and show adapter LAN ENABLED, Wake on LAN: ENABLED.

  The sticker on the laptop and the original box gives a different MAC address to know what the device itself (ifconfig or lshw). No matter, the laptop does not account the magic packets for two MAC addresses.

  Using Wireshark, I see that the WOL packets are certainly diffuse with properly formatted MAC addresses.

  My thought is now that it is a BIOS problem but I can't find the right bios for this machine.

  What would be the best bios match? Keep in mind this box is Linux.

  Thanks in advance for any help.

  See you soon

  Nick

  Hello

  Have you checked if the WOL is enabled in the network card settings?
  Do you know how to check this?

  Go to the Device Manager, expand network adapter s and mark LAN card.
  Then, go to the properties of the network adapter and check the Advanced tab.

  There are a lot of different settings and a configuration option must refer to the WOL.

• Wake up to the problem of the ring - Fax modem does not have wake up reliable PC from sleep mode - how to 100% reliable?

  When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time, but not all the time.  I want to wake up the PC everytime, with 100% reliability.  (When the PC is on, the modem and the machine to receive faxes beautifully.)

  What do you suggest me?

  Modem: Conexant D850 PCI V.92 Modem with the recent update of driver to version 7.67.0.50 (2007-07-03) (but this problem is the same today as before with the 2004 driver version)
  PC: Dell Optiplex 755
  Processor: Intel Core 2 Duo E4600 @ 2400 MHz
  RAM: 2 GB, of which 1.4 GB is usually free
  BIOS: A14
  OS: WinXPPro SP3 with all updates
  AV: Avast free Home
  Anti-spyware: free SpywareBlaster, Spybot S & D free and AdAware anniversary free
  Fax software: Console MS Fax that comes with WinXPPro SP3
  Printer/Fax printer: HP OfficeJet Pro 8500 Wireless AIO (A909g model)
  Screen saver: Logo "XP" after 9 minutes. do NOT show the Welcome screen on resume
  Power settings: Home/Office Desk. Turn off screen after 10 minutes; Turn off hard disks never; System to sleep after 20 minutes; Hibernation ever; Do NOT ask for password when the computer wakes mode standby
  Home Ethernet network connection: card Intel (r) 2-82566DM Gigabit Network Connection with all function Wake on LAN settings WE.
  Browser: Firefox latest but they use IE occasionally when necessary
  E-mail: MS Outlook Express 6 for mail POP3/SMTP service
  Miscellaneous: I also run LogMeInFree version 4 on all my home computers

  Thank you.

  I'm sorry, but I do not know how Wake on Ring more reliable.   I doubt the reliability of 100% is possible.

  I suggest you obtain a separate fax machine.

• HP C4280 with Win 7, works of scanner, printer has its not, sometimes

  HP C4280 all-in-one printer with Win 7 0n Fujitsu AH531 laptop, scanner works, the printer does not work, concludes sometimes-laptop, printer at first, later said he does not, must reload the software. Spooler problem? I loaded SW several times. Printer works for a while, then same old problem, computer laptop can not find any printer?

  Help, please!

  The printer spooler is the reason why everything stops after a while. It is a Windows problem with the computer.

  The printer seems to work very well. I have a link that will help you with error 1053.

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/how-to-fix-print-spooler-error-1053/m-p/2481801/highlight/true#M40124

  I hope this helps.

• My computer is not properly wake up from its sleep, it is powered, but it gives just a black screen

  Well my pc sleeps properly the problem is when I press the power button to wake up to the top the power turns on and the green lights are on but it sends no signal to the monitor, so all I get is the black screen and the only way to put it back on is to make a vigorous reboot by pressing the Start button. either way, I have Home Basic windows installed on the same pc and I didn't have this problem, now I have windows home edition premium with service pack 2 and installed all available updates. any suggestions?

  Hello

  1st I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem
  and similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in
  Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network adapter power management,
  WiFi, Modem and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  ==========================================

  I would also update the main especially video drivers - check again the power management
  Settings after installation.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Lightroom opens not sometimes, and when it does, cannot import images

  I have Lightroom CC.  I am extremely frustrated.  I had it on my old laptop, and everything was pretty good.  I have a new computer.  I loaded Lightroom on it.  I can't import my card images CF.  It does not recognize my external drive where I keep my Lightroom folder.  It recognizes the card (sometimes) like Lexar, instead of the previous Canon.  Sometimes the set preview to the point sometimes images not.  I was advised (and I probably should not have done this) to restore the original preferences.  Yes, I did.  Still nothing.  I thought that maybe I didn't have enough space on my external hard drive.  I imported AN image, and he did it very well.  Then, I could not go back to the library.  I'm SO tired of seeing that stupid small circle and waiting, hoping that he'll do something. I have a wedding to shoot in a few weeks and am terrified that I won't be able to download one of my photos.  I'm ready to tear my hair as before the update of Windows (not sure who had nothing to do with anything, maybe a coincidence), everything seemed to work (on my old computer) very well.  Had not really begun to do anything on my new up to our days, when the old one was.  I'm so confused at this minute I don't know what to do or who to ask.  FOR INFO.  I have a Canon 5 d and 5 d Mark IV.  I know that, for some time, the Mark IV would not import into Lightroom.  I had no problems with the 5 d, but now I am.  I import to an external hard drive to a CF card reader, traditionally.  Now, NOTHING works properly, and I am not technically savvy enough to understand or understand have the solutions I've read online.  I'm afraid to try the download of Mark IV, too.  I need HELP!

  First of all, make sure you are updated to 2015.7, which is required for the 5 d Mark IV.

  Go to help > about Adobe Photoshop Lightroom to see what version you have.

  If it's something less than 2015.7, you need to update.

  First of all, try help > updates. If this does not work, download the update 2015.7 here:

  Update of Lightroom

  After a successful 2015.7 update, you should be able to import from your camera.

• Rotation Rotation > arbitrary does not sometimes

  long time user of photoshop here to try my game a little bit (it is rather slow and sloppy ATM).

  No one knows why I sometimes don't have not access to arbitrary section of image reversal and 90 degrees can do?

  I have a tiff file I need to run 1 or 2 degrees and PS not give me that option.

  TIA

  What version of photoshop are you using?

  If you look under Image > Mode is the Bitmap?

  Change the image color mode RGB make a difference?

• Tecra M1 will not sometimes initialize upward

  It's strange, sometimes it starts correctly, but others, I won't start at all. No matter if I'm only on AC, battery, or kiosk, the power of will led light, but nothing happens and I can't hear the typical sound of the hard drive running.

  Apart from restarting the laptop that I detected with the system on if I hit the flat areas on the sides of the touch screen and display objects.

  Sounds to me like hardware issue something as problem of motherboard power supply maybe electronic fault of power or graphics card problem. I m thinking the GPU issue due to the artifacts that occur on the screen.

  What do you think of this?

• The Bluetooth Manager: do not sometimes - reconnect Satellite A100

  When I use a Bluetooth modem, bluetooth auto disconnects modem (nokia 3250 with original drivers). It auto reconnection to the modem for the setting, but sometimes the computer (satellite a100) to reconnect.
  I can just restart the phone to reconnect the nokia phone. I only use nokia pc suite, because it is too slow.

  Is someone can help me?

  TNX for any response.

  Hi Miki

  I have connected my cellphone to unity by using BT several times and each time it works without problem. I put t know how you set up your mobile phone, but please do it on this path:

  1 activate the Bluetooth using the FN + F8 key combination
  2. install the new hardware if necessary (some of them)
  3. start the Bluetooth stack
  4 turn on the Bluetooth on the mobile phone (discoverable)

  5. Select the Express mode > next
  6. choose visible device listed in the list of Bluetooth devices > next
  7 choose to identify passkey (1234)
  8. Enter the key in the mobile phone. Twinning will be success
  9. go on Next and configure the internet connection (provider number) > finish
  10. the new connection will be created in the Bluetooth stack utility
  11. you can start the numbering with double click or click with the right button of the mouse and choose Connect

  I set up my Nokia on this path. If you want to connection start the Bluetooth settings you can find in Toshiba Assist on the CONNECTION tab. Double click on the created connection must activate the connection procedure.

• Administrator password recognized do not sometimes secondary account.

  If I try to run CCCleaner while in a secondary account, the administrator password is requested.  When a correct password is not accepted and request new password.  But the administrator password is accepted when try to run other programs such as Iobit Malware fighter. This is a recent development.  Account used to always accept the administrator password.  How can I fix it?

  Hello

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that administrator is not recognized in some programs.

  To guide you in the right direction, I will need a little more information of the computer with the problem. Please help me answer the following questions:

  1. what version of Windows is installed on the computer?

  2. What is the full error message?

  3 have there been recent changes made on the computer before the show?

  I understand the inconvenience you encountered. I will certainly help you with this issue.

  I suggest to test the problem in safe mode and check.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  I also suggest you click on CCCleaner right-click and select run as administrator and check.

  Please answer the questions so that we can help you solve the problem that you are facing on the computer.