I Tenda router but windows7 doesn't connect it to wifi

Similar Questions

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• MY laptop gets a strong signal from router but it does not connect to the internet.

  While trying to install a wireless adapter for my xbox (which I always did not), I was looking at settings in the laptop and must have changed something.  I tried to restart all the components involved as well as the restoration of the system, nothing works.

  Help, please!

  Hello.

  1. you get any error message?

  2. you are trying to connect the Xbox to the network?

  Please follow the steps mentioned in the articles below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Can connect to the wireless router, but not to the Internet

  Because I could not find this post, I published in my problem to

  Windows 7, connecting Local only, no Internet

  I think I described the problem a bit better here.

  I had a Gateway DX4300-17 with Windows 7 Home Premium for about six weeks. I connect to the Internet via a Netgear wireless router. My Internet connection dropped often, but I've always been able to reconnect to the Saturday. Since the start-up my computer Sunday, when I try to connect to the Internet, the system tells me that I am connected to the router, but there is no connection between the router and the Internet. I did a system restore to Friday, but it did not help. I searched the Knowledge Base and tried several things I found there. Running "sfc/scannow" indicates that all is well. I disabled the '6' Protocol (I don't remember the letters that were with this, but you probably know what I mean). This made no difference either. I thought I would ask for help here in the hopes of not having to restart the computer to the "hospital". That's a very different problem here barely a week. I need help, please.

  Hello Bill6009,

  Have you tried to boot your computer in SafeMode w/network to see if the problem persists?

  If so, try to perform a clean boot to see if you encounter the same problem.

  Please post back your results if we can help get your problem solved J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Smart Phone Hot Spot doesn't connect with my laptop Leveno using Windows 7

  My smart phone is a LG with Verizon Hot Spot spectrum. Hot Spot on, but it doesn't connect with my laptop Leveno using Windows 7.

  Spoke with verizon several times today and they seem to think that the last windows update can have turned on something from my laptop.

  Thank you

  Stan LG

  E-mail address is removed from the privacy *.

  Hi StanLX,

  To provide the proper resolution, that I would need more information on your side.

  1. do you receive any error messages?

  2 did you connect reactive to laptop before?

  3. What is the number of the Windows updated Knowledge Base article installed recently?

  Method 1:
  I suggest you run the network troubleshooter and check if it helps.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:
  If the problem is not resolved, I suggest you temporarily disable the security software and check if it helps.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Site to site VPN, can ping router but not customers

  I set up a site to site between an ASA5505 (company) and a router of the 871w (remote control).  The tunnel is up, and I can ping anything on the remote network business network.  However, with the passage of the company remotely, I am only able to ping the router, but no clients are connected on it.  The IP address for the router is on the same subnet as the rest of the guests (192.168.1.0/24).  I looked at the logs on the ASA5505 and it seems to be the way the traffic fine, so the problem seems to sit on the 871.  To reinforce this, to actually start the tunnel linking the corporate network using a ping to one of these customers (even if the ping command:------)

  I'll be happy to provide any additional information necessary.  Thank you.

  Hey Marshall.

  Can you confirm for me that there is no firewall on clients that might be blocking pings? The problem description that you provided it seems that as long as the clients initiate the ping, it is successful, but the reverse is not true. This seems to indicate something about customers may be blocking traffic. Also since you say that you are able to ping the router with the ip address in the same subnet as the clients it further strengthens my conviction that the issue could be with the customers.

  Kind regards

  ATRI.

• Computer Compaq nx8220 laptop unable to connect to the wifi at home, but connects to the other wifi elsewhere

  I changed ISP from BT to Sky & my laptop does not connect to new router from Sky, I can connect to other wifi in the Guest House, but not my own, other laptops can connect to my home wifi without difficulty, have tried for weeks to remedy, but does not, sky on phone Adviser took me through various corrections but the woman has admitted that she was not very super-friendly upward as of yet promised callback to track my problem not is not did not materialize at the moment.

  At any time.

  Glad to be of assistance.

• BlackBerry smartphones could not connect to the WiFi system at home - "unable to get an IP address.

  Like many of you, I have WiFi connection problems with my new BB9700.

  When I'm out of the House, I can see my BB, find local WiFI hotspots and I can connect to them immediately.

  However, when I get home, my BB doesn't connect to my WiFi, return the following error message:

  Unable to connect

  Reason: Could not obtain an IP address

  I downloaded the latest version of the software BB (now running version 5.0.0.351), cold all started in view (router, telephone, coffee table and the cat) but still the same error. My foot pain, the cat is not about me and I still can't connect to the House! Of course, my carrier connection works perfectly like their outrageous fees structure... (They are 3G or Hutchinson Telecom under a different name).

  My WiFi access provider (PCCW / HK Netvigator) checked my system configuration and report that everything works correctly. I can connect my PS3, my laptop, my Nokia E71 without any problem and the guy from the hotline can see when I connect each of them to the system.

  I tried different combinations of switching the usual options on and off on the BB but always get a connection.

  SO, any of you kind of people you have a solution other than the cat suddenly once again?

  Thanks in advance,

  RS. HK.

  Dear Mike,

  I basically solved this issue will me a LOT of searching.

  Step 1.

  Router

  MAC address of my Blackberry 9700 has added to the list of MAC access on my router configuration. (Subject to the router to save settings)

  Step 2.

  Router

  Reset the Security Type on router configuration None (presented to the router to save settings)

  Step 3.

  BlackBerry Bold 9700

  Delete the profile of my WiFi at home in the WiFi Options

  Step 4.

  BlackBerry Bold 9700

  Reentry into the profile of my WiFi at home in WiFi Configuration

  WiFi in the House. SUCCESS AT LAST!

  Step 5.

  BlackBerry Bold 9700

  In manage connections, unchecked Mobile Network (i.e. Off and No Way can connect to my 3G service provider)

  Step 6.

  Turn off the Blackberry Bold 9700.

  Battery pull.

  Restart the Blackberry Bold 9700.

  The House immediately found of WiFi Internet and all other functions working perfectly.

  Only problem is now my home network is unsecured. (Can't get the IP address if WEP security is enabled)

  So it's all good now and forward it to someone else who has the same problem.

  Happy Chinese new year!

  Rick

  Hong Kong

• Router WRT160N - Macbook Pro can connect but not Internet

  For some reason any my macbook pro can no longer access the internet wirelessly through my WRT160N. It works very well through a cable connected. I can even connect to the wireless router - full signal and get only one ip address, but it does not connect to the internet - via my browser - I get "cannot find server" and "internet connection doesn't seem to work." Or other applications that use the internet don't work.

  My mac has always been able to connect to other wireless routers. My router is the latest firmware.

  I tried a lot of the things I found in various forums - redo manual settings of router configuration on the router, security (WEP, WPA, unsecured) settings and one suggesting same zap the PRAM. Any Suggestions?

  If your MAC can connect to other networks / Wireless Router, it must do something with your wireless network...

  In this case a simple reset can help you solve your problem, you need to reset your router to default and then re - configure the router from scratch...

  To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  Adjust the settings on your router wireless-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  If you have a second see computer/laptop wireless if it connects to your wireless network of...

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

  Original title: connection problem

  Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

  I suggest you to consult the steps described in the article:

  Method 1:

  You can try the steps in the link and check.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  You can update the driver of windows 7 on the manufacturer's Web site.

  Method 2:

  
  You can remove and re-create the wireless network connection, follow these steps:

  a. Click Start, type ncpa.cpl , and then press on Enter.
  b. right click on your wireless network connection and then click Properties.
  c. click the wireless networks tab.
  d. under preferred networks, click your Wireless
  network and then click on remove. e. click on view Wireless networks.
  f. under management of the network, click refresh the network list.
  g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
  
  Method 3:
   
  
  If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

  a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

  b. right click on network adapters and click Uninstall and restart the computer.

  c. after rebooting, install network cards and check with the question.

  
  Method 4:
  
  You can temporarily disable the antivirus and firewall on the computer and see if it helps:
  Enable or disable Windows Firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
   
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

• HP 4500 g510n-z-printer connected to the router but not responding do not

  Hello

  I got this printer (HP4500 G510n-z) for 3 years. This worked without any problem until I changed my router and installed a nas on the LAN Server.

  Now the printer is connected via WIFI to router and is perfectly installed on computers connected to the router. But it does not work. I used HP Print-Scan doctor and he finds the device, but it was not connected. I tried to connect to the printer IP of all computers, but I have not received any response (using ping, it doesn't have 75% of the package). On the router configuration page, the printer is connected to the usual IP and on connected computers the TCP - IP is configured correctly.

  I have tried everything and I managed only to reboot the router. But it did not last, each computer remains connected only until you restart the PC nex.

  Sorry if I'm not too clear, please don't exitate ask for more details. Thanks for your help!

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Portege M400 connected to the WiFi router, but not the navigation of Web pages

  Hello

  I use M400 laptop computer series that I bought in 2005 and do not know if the guarantee was already finsihed, although I paid extra for an extended warranty.
  You should check a second time.

  My wireless connection was working fine with my conection DSL broadband 2 years ago, I was using router Netgear wireless. In the last 2 years that I did not use wirless conection, recently I bought Thomson TG585 router to my ADSL connection wireless broadband. This wireless router works fine with my other Mac desktop computer but my laptop is not browse a Web page if it says connected with WiFi router.

  I went through all the settings and even I have discussed this question with the technical team bradband and say there is problem with my computer laptop bcz Mac Desktop works fine.

  I checked in the wireless troubleshooting setting and still not able to solve this problem.
  I use KesperKey Internet Security and I tried to turn it off for the test connection wireless but always face same problem.

  I wonder if anyone can help me?

  Thank you.

  Hello

  Disable all the security settings on your router and then try to connect the M400 protected wireless.
  If you will be able to connect to the WLan and will be able to navigate a few s webpage you could activate step by step all the security settings such as encryption of WLan, Mac address filtering, SSID hidden, etc.

  By the way; Have you tried to update the driver WLan?

• Have changed my router but Airport Express no longer works.  How can I connect it?

  Have changed my router but Airport Express linking is no longer.  How can I connect it to the new router?

  The Express has been programmed to keep in memory the settings needed to connect to your 'old' router... What is more there... so the Express is lost and knows not how to find his way.

  The solution is to reset the AirPort Express Terminal at its new, out of box factory settings, so it can be mounted again do not forget to connect to your new router.

  To do this...

  Turning off the AirPort Express for a minute or two

  Hold the reset button the first Express... and keep holding it while you simultaneously reconnecting the power cord the AirPort Express

  After that the amber light was clignoter blink quickly for 5 to 6 seconds, release the reset button

  Allow a minute for the Express start slow, flashing amber light status

  Now, the Express is back in its new factory settings, then you a game it upwards again to connect to your new router... just like you put in place to connect with your old router.

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul