Impossible to access the existing wizard account settings change in IMAP?

Similar Questions

• I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message

  I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message "" an error occurred while the wizard attempted to set the password for this user account". I can't pass this screen and am virtually blocked the computer phone iam trying to access. What can I do? It comes to Windowns 7 Home Premium

  This probably means that your password disk drive is not up-to-date. Here are the other options built into Windows to help you get out of this situation:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• TuneUp Utility has been installed on a trial basis, it changed the things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  On my old Dell with Windows XP I installed Tuneup Utility on an experimental basis, it changed things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  Anyone have a solution?

  Help, please.

  Software support to the YOU seem hopeless, they donot even read the request entirely to meet the last 8 weeks and many emails in series.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  Method 1:
  Try to uninstall the utility and check if it helps:
  http://support.Microsoft.com/kb/307895

  Method 2:
  Try to restore the computer to the point before you install the utility and check if it helps.
  http://support.Microsoft.com/kb/306084

  It will be useful.

• Impossible to access the account, the message says: "you cannot access your account because your parent has blocked it.»

  Changed the title: I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  Hello Nimaakhaven,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• XP has changed the user accounts is now impossible to access the administrator account

  Something has gone wrong when changing my user accounts. I don't have an administrator account can create a. I can't even restore my system. It doesn't let me do anything! What to do Help!

  You use the built-in account named "Administrator"?  If so, the behavior you describe is "a feature, not a bug."

  Windows XP hidden administrator account when a user account is created (because it's a good idea not to use administrator systematically; it should be saved for emergencies).

  You access the administrator account integrated differently depending on whether you have XP Home or XP Pro.

  For XP Home:

  You must restart in Mode without failure.  Restart the computer and start typing the F8 key as soon as the initial startup process is finished.  If you see the Windows logo, you waited too long and you have to restart again.   If you do it right, you will see the white Advance Boot Options menu on black (image).  Use the up/down arrows and the Enter key to select Mode safe because your mouse does not work on this screen.  Once the computer starts in Mode safe mode, the administrator account will appear on the Welcome screen.  If you have not changed the password, the password is blank (no password).

  For XP Pro:

  Follow the signs for XP Home Edition, or in the Welcome screen, with no logged-in user, press CTRL + ALT + DELETE twice.  The 'classic' logon box will appear.  Type "Administrator" (without the quotes).  Once again, the default password is empty.

  Once you enter the administrator account, create an account with "computer administrator" privileges for occasions when you need (for example, to run the system restore or create accounts).  You can use any name you want (other than Administrator), such as MyAdmin.

• BlackBerry smartphones to access the e-mail torch settings

  Hello

  I changed my email password on my gmail account using the web browser on my desktop. But I have difficulties to access the e-mail on my Torch settings so that I can type the new password. I go to 'Set up' and then have the choice of the "Internet mail account" or "business account". I click on the first and get a page entitled "existing users". Then I type my user name and password. I guess that this refers to my blackberry user name and password. But when I type the info and press "contuinue" I get a message saying "the user name is not valid. A user name must be at least 4 characters." My user name is my gmail address, which includes 16 letters before @gmail.com.

  What I am doing wrong?

  Thank you.

  Very well. Problem solved. Apparently when I first set up my Blackberry with my service provider, I did a combo of name of user and password on the Web site. Of course, I forgot all that I ever needed it again--until even two days ago.

  The trick is to contact your service provider and request the user name if you forgot. They can then send you a new password if you don't remember the original. With the correct username and the new password, you should be able to access e-mail settings, and then click the relevant e-mail account and change the password.

  It worked for me in any case. Good luck for the rest of you.

• Cannot access the laptop and Skype settings

  Original title: cannot start laptop settings and other applications

  Good evening

  I have some problems with Windows 8. I used to have a problem with what appeared to be shortcuts that arises simply any key I pressed on the keyboard, so a friend of mine helped me by changing a few things on PC settings (do not know what she did do). Given that (not sure if precisely from that day) that I can not open the PC settings, or even Skype... help please?

  Thank you

  Hello

  This problem may occur because of file system corruption.

  Please help me with the following information related to this issue:

  1. What is the brand and model of your computer?
  2. You receive an error message when you try to access the settings of the PC?
  3. When you say no access to Skype, are you referring to the modern version of Skype or the desktop version of Skype?
  4. You are able to access other applications apart from Skype?
  5. You receive an error when you try to access Skype?

  Check if you are able to access the laptop settings by following the steps mentioned below:

  • Press Windows Key + C.
  • Click on Search.
  • Type laptop settings.
  • Click PC settings and check if you are able to access.

  Please follow the steps mentioned below:

  Method 1: I suggest you to run the Design Checker (SFC Scan) system files because this can be a problem with the corrupted system files.

  System File Checker is a Microsoft Windows utility that allows Windows users to find and restore corruptions in system files

  Monitoring of file system (CFS) and then check if it solves the problem.

  Follow these steps:

  1. Press Windows Key + X.
  2. Click prompt (Admin).
  3. At the command prompt, type sfc/scannow and press enter.

  See also: http://support.microsoft.com/kb/929833

  Method 2;

  You can check the issue on another user account. If you already have a different account created on your computer, please check the question about it, try to create a new user account and control.

  You can check the link for create another user account:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Please answer us on the State of the question as well as the information required to help you further.

• New iPhone synchronize with the existing iTunes account?

  I just bought a new iPhone 6 and they (Verizon) took all the Info off my current iPhone 5 and added to the new phone, contacts, calendar, e-mail...

  I synced my iPhone per day for iTunes using Outlook for calendar and Contacts.

  I made from my old phone to iTunes Cloud backup before you perform the switch but normally sync locally to my PC.

  Now, I want to synchronize my iPhone 6s with existing iTunes account.

  All I have to do differently or just sync as usual.

  Your PC will detect that this iPhone is 'new' and your phone will ask if trust you him.

  After that, restore from a previous backup should work without problem. It will replace all current data on your phone... i.e.: new photos, etc.

  You can use the backup to iCloud as well, but it's requires firstly, erase your phone and use the internet to get your data back. Usually much slower.

• Cannot install the router firmware-impossible to access the knowledge base to do.

  Hello

  complete newb here.

  I'm having some trouble with the abandonment WRT610N router whenever I put on new devices on the network and I go to the download of the firmware update - FW_WRT610N_1.00.03.15_20090514- but I don't know how to install it. It is a .bin file.

  I'm reading the F.A.Q.S. on how to install a firmware on the router, but I can't access the database of knowledge here and I can't create an account to access either.

  How to install firmware?

  I tried just looking for updates via Lela and he says no update.

  I can't finad any program to open the .bin file.

  Duane

  I managed to get the update of the firmware.

  The problem is I think that my router is pretty buggy and unfortunately I got a defective router for purchase.

  It kept stalling on me and go through the steps of power flashing randomly.

  I had replaced it where I bought it and the new router is not a problem at all.

  Thank you for all your help

• Impossible to modify the UAC nonadministrator account

  I have a nonadministrator account.  I click on change UAC.  I get a prompt for a password to administor. I give the password. But in the modify UAC dialog box, I get the message "you must be logged as an administrator on this computer to select this setting" when I choose a lower setting, that I need to try.

  I'm not surprised, need a non-admin and admin password to change UAC.  I'm surprised an Admin account password still doesn't let you change it.

  Given that I can't change it when logged in as long as non-administrator, is possible for an administrator account to change the account settings another UAC?

  Hello Chas2004,

  If you have not tried to run a SFC scan, I would try that.  This happens on a different standard user account?  If you don't have another account, I could create an and see if you can duplicate.

  I would also try this.  Give the standard account of administrator rights, and then see if you can change the settings.  Then remove admin rights just to see if this will allows you to change the settings.

  SFC:

  http://support.Microsoft.com/kb/929833

  Thank you

• BlackBerry Bold 9700 smartphones - unable to access the e-mail account configuration

  9700 OS 6 on ATT

  The problem: the email accounts through the icon of the installer cannot access.  Configuration - mail accounts.  I can highlight the e-mail accounts in the Setup menu, but can't open it.  I can open all other options in the Setup menu

  I had this 9700 for 2 years and my configuration of e-mail account and operational full-time.  My email has been hacked and I fixed that on my desktop CPU but my 9700 will still not receive or send emails.  I did the following:

  1. Reset the battery removal
  2. Deleted service books

  Everything I could find on correcting my email on the 9700 account is that I have to reset my email from my 9700 account information.  Unfortunately, I can not access account configuration menu email form.  Help please.

  Hello Marshall

  Welcome to the Forums of the BlackBerry Support

  This is the KB that deals with this error:

  KB33220 : cannot access the configuration of Messaging Application or connect to BlackBerry ID on a BlackBerry Smartphone services.

   

  Or you can use your BIS Carrier site to add / modify your e-mail account or use your BlackBerry browser, go to www.blackberry.com/integrate to add / change an e-mail account.

• Impossible to access the records after you have reinstalled windows 7

  I recently upgraded my pc with a new cpu, mobo and ssd.  I have re-installed windows 7 on the new ssd (earlier it was installed on my hard drive). My hard drive with windows is still a primary with windows installed on it, partition even if I am unable to boot with it.  I didn't fit I want to backup my data once I have windows running on my new ssd.
  The problem that I face is now that I'm unable to access some files on my secondary drive. I tried to change the permissions for these folders using my admin account, but when I apply the new permissions, I get access denied error.
  The problem is limited to only a few files and I am able to access the others.
  Please help me with this

  The problem is limited to only a few files and I am able to access the others.

  You may need to take possession of the records problem - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Failing to find the talktalk email account settings, to surface RT

  When you add other account e-mail for MAIL, using the following parameters:

  Mail server incoming (IMAP)

  mail. TalkTalk.net

  Server outgoing (SMTP) mail

  SMTP. TalkTalk.net

  Error reads as follows:

  We can still find settings for * address email is removed from the privacy *. Providing this additional information can help. If you don't know this information, serach online, or check with your provider.

  Someone at - it had the same problem?

  Hello

  Welcome to the Microsoft community.

  I suggest to contact the courier service provider and check if all the ports and parameters are correct.

  Let us know if you need additional assistance.

• 6.5 CC Lightroom crashes when I try to access the e-mail account manager

  I am running on a Windows 7 system, with 32 GB of ram and 1 TB of system with 600 GB of free drive. I can choose two of the existing e-mail - Gmail or Outlook accounts, but when I try to go to the account manager Email I get the following error:

  Aodbe Photoshop Lightroom has stopped working

  Windows is checking for a solution to the problem

  Then I see this:

  

  Please notify

  Please back up your Lightroom suite catalog How to save catalogs in Lightroom

  Then reset the preferences of Lightroom doing the following: -.

  • Lightroom nearby
  • Navigate to C:\Users\[user name] \AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 6 Preferences.agprefs and rename 6 Preferences.agprefs Lightroom at Lightroom 6 Preferences.agprefs.OLD
  • Restart Lightroom

  ~ Assani

• ReadyNAS Duo v2 impossible to access the start menu

  Hello

  I am new in ReadyNAS, I bought this one for a long time but only used for a few days... I try to use again, I tried to upgrade the firwmare the/admin /, but surely a bug appear, because after restart-auto, I can not access the /admin/ with my own password or the default password factory.

  So, I am trying to go to the Start Menu to use that reinstalling the operating system. I & pressed the reset button, press the power button and wait... wait... wait... the 5 LEDs light up but that never happen :-(

  I have only 2 LEDs for disks (2 at the same time), and then a few seconds later, only the right one.

  Maybe I can try with a Boot USB Recovery but I can't find where to download (the search engine return nothing on the download page)

  Thanks for your help!

  Hi lakano,.

  Welcome to the community!

  Can you confirm the version of your ReadyNAS unit HW? It could have been labeled as ReadyNAS V2, but it could be a V1. Send me a PM with S/N so I can check.

  Kind regards

  BrianL
  NETGEAR community team