In charge of WPA for Tecra 9100

Hi all

Anyone know if he is in charge of WPA for the internal WLAN module in the Tecra 9100 current, or even available?

Kind regards

Tom

Hello
I spoke with my Toshiba Call Center (for Germany) and they said that there will be no support planned for the same internal Module.Not WLAN WPA!

Good bye

Tags: Toshiba

Similar Questions

  • How to use the CD of diagnosis of the engineer for Tecra 9100

    Anyone who has used the engineer Tecra CD diagnostic for the 9100 (or any other model if they are similar)? I was able to acquire the CD and have been able to recover part of the diagnostics to run tests starting at BACK 6.22 and the tests directly to the release of the CD. There is probably a "correct" way to use this CD but I have no documentation.

    Specifically, I'm trying to diagnose his painful card problem - it is not recognized by Windows and I can't install the Yamaha riders. I basically JUST replaced on this laptop and still no sound.

    All in ALL, I mean: two mothers (upper/lower case); map its (three different cards!); CPU - what else is one that can be connected to the sound?

    Anyway, if anyone can give some guidance on the diagnostic use of the engineer Tecra 9100 CD it would be greatly appreciated.

    no_bones

    Where did you get this CD of engineers?
    I m scared but in my opinion these CDs are not intended for common use of the user and, therefore, you will not find many people who has experience with those CD.

    But it would be very interesting to know how to get this CD

  • 54 MBit WLAN for Tecra 9100?

    is there a module to replace the stock module W - LAN in the Tecra 9100 to get 54 MBit?

    I often copy large amounts of digital photos on the network, so the 11 MBit nerves really me

    Hello

    I guess you need a WLan card with a 802.11 G standard.
    I don't know if you can use a network card local minPCI 802.11 G as far as I know the laptop was configured with a and B standard.
    You can ask the Toshiba service partner in your country if there is a compatible Wlan G card and supported for this device.
    If this isn't the case, then you can also use a key USB Wlan with 802. 11 G.

  • New power adapter required for Tecra 9100

    The airline lost my luggage and so I need a new adapter for my Tecra 9100 but cannot find a list on the site.
    Anyone know the part number that I need?

    Thank you.

    Hi Bill,

    I believe that the number of parts you ERA is PA3283E-2ACA

    Kind regards

  • Question about drivers for Tecra 9100

    My Tecra T9100 do not work with LAN more after the installation of a new HD (old one crashed) and where some Toshiba files on the old HD that I don't know. (Bought the laptop 2. a few years ago by hand) and I lost the CD that belongs to her, and there is no drivers on this site for this 5 year old machine. Maybe a little strange because it's a P4.

    In the list of hardware (control panel/system /) there is no problem with the network card. But at the top of the list, there is a yellow "?" for the UNIT of BASIC SYSTEM and there is the missing drivers.

    It's very confusing to me because I've never heard of these drivers and I don't know which device is the following. There is also a yellow "?" for PCI modem (but I didn't need) so I guess this unit of base system has to do with the PCI-bus and perhaps also affects the LAN card?

    But shouldn't? the drivers will be in the BIOS?
    Can someone help me?

    Hello

    You should take a good look here:

    http://209.167.114.38/support/download/ln_byModel.asp

    because here, you will find all the drivers for your computer. The Canadian site has almost all of the drivers for older machines, and you should really check out.
    I think that "basic unit of system" could be something with ACPI or similar. But lets wait until after you have installed all THE drivers and then give feedback short.
    And no, the drivers are generally not in the bios because the bios is just to boot but it s OS independent.

    Greetings

  • Tecra 9100 - required accupoint driver for XP

    Hello

    I need a MS XP driver for the accupoint of my new (used) Tecra 9100. Or at least I think, because the accupoint does not work and there is no configuration on the menus of the mouse tab.

    On the driver download page http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU I don't know which is the "driver type", I have to choose.
    Can someone help me?

    Thank you

    JS

    There is no available accupoint driver for Tecra 9100 and Windows XP.

    I searched on the Web from Toshiba site too and I looked in the installation instructions, but there is no driver available.

    Sorry, but it's done.

  • Tecra 9100: Try to install updadet driver for card his Yamaha AC - XG

    Hi all

    I got a Tecra 9100 and like many others I had problems after installing SP2.

    I tried to install the sound card with the driver downloaded from the toshiba support page:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

    but I get a windows pop saying that the file yacxg.sys is missing.
    Once the installation is complete and the sound card is not installed.

    Is there anyone who can help me?

    Thank you
    Joazinho

    The fact is that the driver listed in the FAQ from Toshiba is for SP1 and NOT for SP2

    I think you should google a bit and should look for if you find an audio driver that is compatible with the Service Pack 2 update

    Yamaha already provides the fixed driver.

    yacxg.sys 6.13.10.2152 with software synthesizer

    yacxgc.sys 6.13.10.3152 free software synthesizer

  • Hi speed USB via a Port Replicator advanced for a Tecra 9100?

    I have the same problem with a Tecra 9100 and upgrade to hi speed USB as a previous post where the proposed solution was to use a PCMCIA card.

    (see link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24103)

    I had an idea, but I don't know if it will work and need some advice?

    Can you buy an Advanced Port Replicator that has Hi Speed USB 2.0 ports on it (like the PA3082U APR II that works with the Tecra 9100) instead of the PCMCIA card.

    If the docks of Port Replicator in the motherboard will it give you Hi Speed USB 2.0, or is the Tecra 9100 forced to USB 1.1 via hardware in the laptop itself and the Replicator will not help?

    Also if I go down the road of Port Replicator I need drivers for speed ports Hi of the Replicator to work on the Tecra 9100?

    Or to ask the question – what is the PCMIA USB 2.0 card in that advanced with HI Port Replicator speeed USB is not?

    Thanks in advance

    Hello

    the Tecra 9100 has NO usb 2.0 and it's a fact. Given that the Replicator has these USB ports 2.0 does not mean that your machine when it is docked to the Portrep, is able to manage USB 2.0 devices. The portrep, it's like a usb hub and behaves like. So if your machine doesn´t have it then that's it.

    And the explanation on the PCMCIA/Cardbus solution:
    The pcmcia card USB 2.0 Chipset, this is the reason why it IS a USB 2.0 device (roothub).

    I hope this was clear to you :)

    Just buy this card and you will have USB 2.0

    Welcome them

  • Tecra 9100 comes on intermittently and turns off after 10-15 seconds

    Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

    The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

    It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

    Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

    Thank you

    Hey,.

    Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

    But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

  • Tecra 9100 - no audio device after XP Pro install

    The audio device does not appear after installation of xp pro sp2 on Tecra 9100.
    I tried allsorts to research on forums and websites.

    I found install them drivers on this site but used to my laptop.
    I need to locate the audio device before get drivers?
    I know this is a very old problem but I tried for 12 months with no result.

    Any help appreciated.

    WOW!
    You are still using the good old classic? Surely she s or it was a nice laptop but maybe it's time for something faster? ;)

    Back to your question;
    On the European driver Toshiba page, you can find drivers Tecra 9100.
    You should look in the Archive (in product type click Archive instead of the laptop)

    There are two audio drivers for Win XP.
    She s Yamaha audio driver version
    -5.12.01.3141
    -6.13.10.2152

    I guess the 6.13.10.2152 is a more recent who is available and I think that you should use it!

  • Tecra 9100 - BIOS block 1 damaged and the update of the BIOS?

    Hello

    I have an old Tecra 9100 with years of quality service, and it is my first problem, but is a great, after a forced restart the display shows the message BIOS 1 damaged block. I tried to fix the BIOS upgrade to the latest version I found, the 1.6 one, but it is a version of Windows (to upgrade a Toshiba computer I think) and when I try to run it in another computer to generate a floppy and upgrade the BIOS drive, I can't, because a common message from modules of Toshiba.

    Its there any floppy BIOS image - archive I can download to perform the BIOS update the BIOS?

    Thanks in advance.

    Hello

    All you can find is stuff on the Toshiba support page. I don't know where you live, but try to contact nearest Toshiba authorized maintainer.
    They have access to the database of Toshiba and they can get it for you. Call and ask for help. I'm sure they will help you fix this BIOS.

  • Customer password-Toshiba Tecra 9100 Setup

    Hello:

    I have an old Tecra 9100 and I need to access the configuration, I wrote to Toshiba Spain provide data on my computer and from there I was forwarded to a different email client and atencionn the truth is that, after nearly two months now, however, no one has contacted me!

    On the page to access this forum is reported that if the user is logged on the Club, among other things, will receive the password if necessary.

    I am really very disappointed with the service that it provides to its customers and Toshiba but I am about to buy a new one, I have serious doubts have emerged whether he should opt for a Toshiba.

    If anyone can help me write in Spanish, my post is [email protected] address

    Saludos,

    Rafa

    Hello Siegen

    I am very interested to understand your problem and try to help but I really didn t understand your problem. Of course, my English isn't the best, but I hope you can clearly explain what you want to know about this old notebook.

    BIOS password has this oldie and now, you don't have access to it now?
    Is your laptop or you bought one?
    Here you can ask what you want and I'm sure that you can chat with other owners of Toshiba laptops on your problems.

    I have two of them and I am very satisfied. Support and customer service are on the high level. So I'm really interested about your problem and the reasons why you think that the service is not good for you.
    I mean, for each question, there must be a logical explanation.

    I am quite often here and you want to discuss with other people. If the last comment on the propaganda is somewhat strange to me.

  • Tecra 9100 - which HARD drive is bigger than I can use?

    Hello

    I just bought a second hand Tecra 9100 with a 40 GB HDD (not yet received but it is in transit).
    I would like to exchange the hard disk and put a bigger but in one I was wondering.

    What is the largest disk in the BIOS will support?

    Thank you

    Hello

    This forum contains a large number of threads for similar issues.
    Why you n t use the option search and the search for similar topics?

    I found these threads:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=146617

    Here in this thread someone updated the 80 GB HARD drive
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=76045

  • Tecra 9100 - error IDE with new drive

    I want to use a burner DVD UJ - 820B on my Tecra 9100, BIOS-Version 1.6.
    If I change the UJ-820, I have IDE #1 error in the Bootscreen, and the device is not recognized.

    No tool or the update for this problem?

    A #1 IDE error normally if a wrong settings or connection together.
    So I think that the disc is not compatible with the laptop.

    Look in your user manual and choose a drive that is listed in the manual. Not every drive is compatible with any laptop.

  • Re: Cannot update BIOS of 1.5 to 1.6 on Tecra 9100 T

    I have problems with the update the BIOS of my Tecra 9100. The current version is 1.5, and I want to update 1.6, so that the DVD-RAM UJ-820 does work.

    I tried to do with the windows tool in the Zip file (error message: user lacks administrative privileges) and with the startup disk (error message: unknown chipset).

    What can I do next?

    Hello

    You are right. On the support page Toshiba 1.60 update is available for the old Tecra 9100. As I see that one option is available WIN. This means that you must do under Windows running. If the option with the startup disk can be done at all.

    Start your Windows, download update (910078v160.exe) and extract it to the desktop. Close all running applications and run the exe file. That s it!

Maybe you are looking for

  • Where Contacts have GO

    It allows to be on the side button!  I wish that we would like to know these things before the update.

  • can I save through my router?

    Can I connect an external hard drive to my router (it has ethernet and USB connections) and use time machine to make backups? If so, you is everything I need to know before you go out and buy a HD?

  • whenever I use my search bar, he goes on some Russian site

    whenever I use my search bar, it goes to this website it is all the Russian and I cannot read a word about it. y at - it something I could turn off which could cause it to use Google for my search bar. I don't like the Russia. the webthingy is the UR

  • Failed to load USB Camileo S20

    Hi all Ask advice available. I just bought the Camileo S20 and note that the camcorder can not loaded via the supplied USB cable. All I get is a constant blue light (indicating that it is fully charged), even if it is not. If I plug through feeding,

  • Paste into illustrator distortions of color?

    Hello worldI did a very beautiful artwork in the document an Illustrator and trying to copy and paste into another document illustrator "master."  However, when I paste in the master document, the colors have dulled and look very different from the o