Is the second possible drive in Satellite P775 program-112?

Similar Questions

• Windows 8 doesn't recognize DVD drive on Satellite P775 program-112 - code 19

  I have a Satellite P775 program-112 that was previously under Windows 7.
  This weekend I have upgraded to Windows 8 Pro RTM.

  Following the upgrade, the DVD drive is no longer recognized.

  In Device Manager the drive "POLE * one BD - MLT UJ240EF" is a warning symbol, and the status of the device in the properties is "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  I tried everything I found on the web without success:
  -Reinstall the driver (http://technet.microsoft.com/en-US/library/cc772156)
  -Find and remove UpperFilters / LowerFilters values in the registry (http://support.microsoft.com/kb/314060): in my case, they were not present

  I also tried to plug a player of DVD USB of my laptop - it failed with the same status of the device in Device Manager. This suggests the problem is not specific to my hardware DVD.

  Any suggestions welcome!

  Thank you

  Don't have no real experience with Win 8 but from my point of view, it's a Windows system problem that also appears on an another old Windows systems.

  The ODD driver is part of the Windows system (any Windows) so you would not be able to download and install a separate driver.
  I had a similar problem with my old Win Vista laptop.
  Could solve this problem by removing the CD/DVD drive in Device Manager
  I restarted the laptop and the system could install the STRANGE once again without any yellow exclamation point

• How to use the second HARD drive of Satellite A210 - BP1 for mirroring

  Satellite A210-BP1 came with 2 HDD (160 GB).
  Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
  This should be done without supervision and in real time - as a RAID 1.

  How can I do this?
  I also have Vista professional available and I would be willing to use 3rd party software as well.

  Thanks in advance for your answers.

  Hi Jan

  I doubt that this is possible
  Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
  Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

  Therefore, the final answer is; NO, it is not possible to use mirroring

  Concerning

• Re: How to use the second hard drive in Satellite A300?

  I got a second hand Satellite A300 which was to be thrown out due to a defective DVD.
  I fixed the DVD and have a perfect system.

  On opening the box, I discovered that there 2 x 250 GB hard drives. I checked CMOS and show the 2 drives. However, Vista displays only the a drive.

  Excuse my ignorance, but how do I access to the second drive?

  I have Satellite A300 with two hard drives and each HARD drive has another operating system. Both hard drives are recognized correctly.
  I put t know what the problem is here, but the two hard disks should be recognized automatically.
  Try to set the BIOS to default settings and check again.
  Try to start the check and install Microsoft bootable disk if the two hard disks are displayed in Setup.

  I just hope that there is not a hardware problem.

• Satellite P70 - how to use the second HARD drive?

  I have recently bought a satellite P70 - A - 10 d.

  I see that there is no second location on hard disk, so I can install a second disk.
  You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

  But I can't understand how screed the disc.
  Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

  Hello

  If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

  Welcome them

• How to install the second hard drive in the Satellite A200-1 of body weight?

  I see my new Satellite A200-1 of body weight has two hard drive bays, the research in the second span, I don't see how a second drive can be mounted as the plug into the Jack seems to be missing.

  What parts do I have to mount to place a second drive that they are held in stock by out of the local computer and are quite cheap, can someone advise me on part numbers etc of the bits I need.
  Thank you
  Steve

  Hello

  I know that this empty place for second HARD drive is a bit confusing, but the same situation is with my A200-1CR. The fact is that some A200 models come with 2 hard drives and laptop case design this place must be prepared for this second HDD.

  But this does not mean that each A200 can be improved for the second HARD drive.

• How to set up the second hard drive

  My Mac Pro has two, the hard drives of 1 TB.  I had originally planned on the use of the second hard drive for Time Machine.  However, instead of using Time Machine, I now save by cloning my first hard drive to an external hard drive using Carbon Copy Cloner.  I did not use Time Machine in a year and do not expect that I have to use more.

  My first hard drive fills up-I have about 150 GB unused on it, and with video editing I'm is squeezed.  What is the best way to configure my system so that I can use my second, now sleeping, hard drive? Is it possible of them gang up together so that my system will behave as if there is a 2 TB HDD?

  Thanks in advance.

  Yes. It is called RAID.

  For more information on how to do this, see https://www.tekrevue.com/tip/create-raid-el-capitan/

• starting from the second hard drive to a dv7 6199sl

  Hello.

  I noticed that my dv7-6199sl space for a second hard drive. There is the caddy but not on cable. Before you buy the cable

  (I don't know where yet, maybe HP spare parts site) I need to know if it is possible to boot from the second hard drive with my laptop model. Thanks in advance.

  Best

  John

  Hi John,.

  My best guess would be that the USB 3.0 ports require a driver to work correctly, try to boot from it (when the driver is not loaded) may not work - this isn't a definitive answer, but I do not know of bootable recovery media certainly has problems booting from a 3.0.

  Regarding the wire to the second HDD, I would suggest sending a request thereon to HP to the Email address in the form below.

  http://h20141.www2.HP.com/hpparts/contact_us.aspx?mscssid=1DF92190D24F41BD8DFAF888728F5EBA

  Kind regards

  DP - K

• Location for the second hard drive to 500-164 Pavilion

  Cannot find place to install the second hard drive in the box. Where it is installed?

  HP has not produced a manual upgrade. Please see this manual, because it could help you.

• What do I need install the second hard drive HP PAVILION: p6633w

  What do I need install the second hard drive HP PAVILION: p6633w?

  donp815 wrote:
  

  What do I need install the second hard drive HP PAVILION: p6633w?

  Hello

  You need two cables, one is a sata cable:

  http://www.play.com/PC/PCs/4-/30305659/706331346/STARTech-com-6in-SATA-to-right-angle-SATA-serial-ATA-cable-female-SATA-female-SATA-6-inch-red/ListingDetails.html?_%24JA=TSID:13315% 7Ccat: 30305659% 7Cprd: 30305659 & kw = {keyword}

  This cable is only for data and connect the hard drive to the SATA connector on the motherboard.

  The other cable is energy:

  http://www.itpartsdirect.com/STARTech-15-24cm-4-pin-Molex-to-SATA-power-cable-adaptor.html

  It connects the hard drive to the PSU.

  You can also buy a combo like this cable:

  http://www.Amazon.co.UK/DP/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4

  All you have to do is to connect the hard drive and that's it. Make sure that the main drive with the operating system is connected to the primary SATA connector (I think there are the numbers 1, 2, 3...)

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• Add the second hard drive

  I replaced a faulty computer with a second hand replacement. Both are programmed with XP and the same browser. I installed the HDD in the position of the Tower slave, plugged the cable and Ribbon secondary and put power cord.  The computer does not recognize the additional hardware. Y at - it an easy way to simple transfer of data to the new hard drive, or is there a way to access the second hard disk drive so I can use the computer program?

  I replaced a faulty computer with a second hand replacement. Both are programmed with XP and the same browser. I installed the HDD in the position of the Tower slave, plugged the cable and Ribbon secondary and put power cord.  The computer does not recognize the additional hardware. Y at - it an easy way to simple transfer of data to the new hard drive, or is there a way to access the second hard disk drive so I can use the computer program?

  You have misused terminology in this issue, so it's a little difficult to determine what your problem may be caused.

  What do you mean by "the computer does not recognize the additional hardware?  Only shows drive in disk management (start > run > diskmgmt.msc > OK)?  If the player appears in disk management, but not in my computer, you may need to use disk management to assign a drive letter.

  It seems that if you want to take the faulty computer hard drive (in condition, of course, was not the hard drive itself which was defective) and put it in another computer.

  There is no such thing as a "slave of the Tower position."  Likely, you just put the old drive into an available drive Bay.

  Generally, the 'secondary' water is used for optical drives - not a second hard drive.  Usually, if there is only one hard drive, it is connected to the connector at the end of the water and the second hard drive is connected via the connector in the middle of the cable.  The cable connected to the primary IDE connector on the motherboard should be a 80 wire cable, while the other may be a 40 wire cable:http://www.mikeshardware.com/howtos/howto_connect_ide_hd.html

  When you have 2 drives connected on the same cable 80 wire, one is the 'master' (the one linked at the end of the cable) and the other is the "slave".  You specify the drive to this topic, what you are doing by correctly setting the jumper on the pins at the rear of the car.  You set the jumper on a 'master' and the other as 'slave' or two disks can be set for "Cable Select" If both support this and you have the special cable Select "Cable".

  However you connect, you must make sure that the drive of the old computer is defined as the slave drive, because you do NOT want to start from this installation of Windows.

  The foregoing assumes that both drives are the older IDE type of walk.  If one or both are SATA drives, it is quite something different.

• Message need to get an administrator authority, during the passage of the second hard drive.

  Original title: pass to the second hard drive

  My computer has two hard drives of 500 GB.  One is almost full.  I want to start using the other hard drive, however when I tried my computer said that I need the authority of a Director and that I don't have that power.  I am the only administrator on the computer, so I don't understand why it says that.  In addition, as the original hard disk memory becomes more complete, my computer crashes more.

  Can anyone help?

  Hi ColMarriott,

  Using a hard drive internal or external?

  You can try the second formatting hard drive after taking a backup of the data on the disk.

  If you use an external hard drive, you can try the following steps.

  a. connect the external drive.

  b. find the external hard drive in windows Explorer

  c. right-click on the drive and select format.

  You can check the following items and check:

  Install or remove a hard drive

  Create and format a hard disk partition

  Important: Make sure that you have backed up all the data before going forward with the format.

  Since the first hard disk is full and crashing, you can try to move some data and check only files not programs drive different or another location.

  Hope this information is useful.

• keep the second hard drive as duplicate in case of failure of the first disc

  I installed the second hard drive of the same size mfg and would not lead copy. Now I want to keep up-to-date with the first hard drive so that if the first drive fails, can I use the second drive until I get replacement for the failed drive. Never forget backups all have problems when you need them.

  You can not do it legally.

  Vista installation rules:

  A single license is a single Installation.

  This applies even on the same computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Setting up the second hard drive preinstalled

  I have a Pavilion m9250f equipped of Windows Vista 64-bit with two 500 GB hard drives.  The first hard disk is almost at capacity (available 15%), and I want to know how to set up the second disc for use.

  Hello

  The SATA controller mode setting is in the bios. F10 will get you into the bios. Back up your data before attempting to make any changes.  If you use the RAID mode then then you will need to enter the Intel RAID CTRL + I utility at startup to disable the parring.  RAID 1 is extra protection in case you have a hard drive failure.  If you disable the RAID 1 parring so be sure to perform backups at a frequency you can live if you experience a hard drive failure.  When the RAID 1 parring is disabled, then the second hard drive will be available for data storage (more than 500GB).  If get you there, then you can do a quick format on the second hard drive.  Now you should be able to move the folders you want to the second hard drive.