LabWindows 2009 on XP64 driver installation

Similar Questions

• Creating a program the evolutionary IVI driver installation problems

  I have problems when you try to create an upgrade for an IVI driver installation.
  I created the installer by using the creative installer included with LabWindows/CVI 2010 IVI. In my case, I have two versions of the IVI driver DLL and configuration (1.0 and 1.1).
  1.1 - the installation program was created using the option "install existing rebuild" of the creator of the installer.

  My problem is the following:

  • If the driver of the IVI is not installed the 1.1 - installation is completed without error.
  • However, if the 1.0 driver is present, the 1.1 installer gives me the error message following just at the beginning of the installation:
    "Setup has detected a third party IVI driver in the directory C:\Program Files (x 86) \IVI Foundation\IVI\Bin. Please uninstall the existing driver before proceeding with this installation. »

  I noticed the things so far:

  • The UpgradeCode MSI remains the same for both configurations (as expected). This seems to indicate that the installation program supports upgrades.
  • The installer contains a DLL (NiIviDriverDetection.dll) used in a CustomAction to the 3rd party.
    What this DLL seems to do, is to perform a control version of the currently installed driver IVI DLL (1.0 in my case).
    According to the results of this audit, the installation process is abandoned.

  If everyone has noticed this behavior or anyone has any suggestions on how to create an IVI driver installer which can be upgraded without uninstalling the old version first?
  Maybe I put just an evil version information field, but I do not know that which (if any)...

  Advice would be greatly appreciated!

  I seem to have found a solution:

  The problem is that the MSI CustomAction, seeking a third drivers IVI (DetectAction.C1C4DD2F_AD86_44E6_BA47_FC41E5C0DAAF) is performed before the FindRelatedProducts Action.

  So the DetectAction is not ignored if an older version of the IVI driver is located (looking at the MSI tables clearly was NEITHER).

  Move the sequence numbers of the 103 to 107 behind the FindRelatedProducts Action InstallExecuteSequence shares both InstallUISequence tables (for example starting at 370) will make it possible to do an upgrade of an IVI driver installation.

  This can be accomplished using the Orca tool included in the Windows SDK.

• Qosmio F60 - Intel graphics driver installation error

  Hello

  Some time ago I managed to destroy my Nvidia 330 M graphics card.
  I don't know what exactly happened, perhaps overheated, I just BSOD and then my system reported ERROR 43.

  I reinstalled entire windows by default with toshiba drivers but without success, the card did not work.
  I uninstalled my laptop Nvidia drivers, so my graphics card is "Standard VGA graphics card".

  I tried to find a way around, and I realized that I can use the graphics processor instead.
  I have Intel i5 - M430, so I tried to install the graphics driver intel HD only to get an error "does not meet the minimum requirements of the system.

  Can someone help me with this problem please?

  Hello

  Processor Intel Core i5 - 430 M (3 m Cache, 2.26 GHz) takes in charge the first-generation Intel HD graphics unit.
  The driver could be downloaded from the Intel driver page and you will need to choose the right
  https://Downloadcenter.Intel.com/

  Graphics-graphics drivers for laptop-Intel Core processors with Intel HD graphics card > >
  Now you should get a list of the different drivers for different system.

  Choose and download the latest driver for the system you are using.
  Note: choose the ZIP package.

  Then uncompress the package somewhere on the HARD drive (I prefer the office). Then go to Device Manager and choose the graphics card (Standard VGA graphic card)
  Now choose the driver installation and use the Advanced installation. This allows you to point to the driver package that you have unzipped on the desktop.

  This installation procedure should work very well because he worked also in my case.

• Satellite M60 and the display driver installation

  Help people to the display driver "installation cannot continue because the size of the specified directory path and the name of the installation folder exceeds 88 characters.
  Shorten one or both of the limit specified below and try again"! that to me?

  Hello!

  This looks like your username to long and the path of files extracted more than 88 characters.
  I think you should change your username or try with another account to update the driver, for example the admin account.

  If it doesn't work try to download the driver again.

  I hope this works, but you can give us feedback, what's going on.

  Good bye

• HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

  After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

  Hello @fede95,

  Thanks for posting on the Forum of HP and welcome!

  I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

  I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

  I'm looking forward to hear back and work towards the resolution of this problem.

  If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

• "Driver Installation module stopped working and was closed" error nvidia

  Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

  Since installing I can not any version of the nvidia drivers graphics card to install.

  "Driver Installation Module stopped working and was closed" is the error that happens every time.

  IM immensely frustrated by this

  Why you post twice?
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=114172#114172

  Recommended to follow only a single wire

• HP 2000 2116 - YOU: Installation starts is not after the Extraction of the driver installation

  Hello

  I just installed Windows 7 Ultimate 32 Bit OS. After installation, I downloaded all the files required from the Internet HP website driver installation.

  All the drivers have been installed end, except for the Wifi card.

  When I start to install the wifi driver, after extraction of the file in the "Swsetup" folder in the C drive, installation does not start. I don't know what to do.

  Help, please.

  Hello:

  You install the correct drivers?

  The BOM indicates that your laptop comes with the 9485GN 1 x 1 WiFi 802.11b/g/n Atheros card and Bluetooth 4.0 3012 combination, then that would be the drivers you need for the wireless and bluetooth...

  http://PartSurfer.HP.com/search.aspx?SearchText=B8N01PA

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  File name: sp56572.exe

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  File name: sp56573.exe

• Re: Satellite P100-160 - failed display driver installation

  Satellite P100-160, PSPAAE, 32-bit vista.

  Today, Aero is not working and not available in graphics properties. Later installed the site of Toshiba UK, 15.0.1.1114 Intel display driver. This version was actually older than my current driver but I thought that maybe she was the only availabel that it must be correct.

  The driver installation failed with an error (no details don't just "year error has occurred"). Now, I don't have aero and my screen resolution cannot be set above 1280 x 800 - 1440 x 900 is expected

  To say that I'm pisseed would be an understatement. Can anyone help? Thank you

  Hey,.

  If Aero is not available I think that it s display driver problem

  In any case, did you remove the old display driver before installing a new? Go to Device Manager > right click on the graphics card > uninstall. After the restart the display driver must be uninstalled and you can start with the display driver installation.

  If you install drivers make sure you are logged in as administrator and antivirus/firewall is disabled. Reboot once again and you should be able to choose the native screen resolution now.

  Check this box!

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!

• the driver installation failed after startup

  Hi all an im new here and im facing a problem with my compaq c500 there this BSOD 0x0000007B problem and I was able to start following the guide but since I can not install all the drivers on my laptop it gives me an error called the driver installation failed: could not find the device for this driver. Please help me thanks in advance

  To install the Conexant audio driver, you must first install the MS UAA.

   

  MS-UAA, ici

   

   OR > MS UAA for XP SP3, ici

  For assistance please post MODEL full and P/N of your serial number on the bottom of the laptop.

   

    The localization model number

• NIReport_Print LabWindows 2009 vs. 2010

  I have the code met under LabWindows 2009 that works, but when I complie under LabWindows 2010 it stops working.

  I am creating PDF files using Adobe Distiller, functions such as PrintPanel and PrintTextBuffer work in 2009 and 2010.  However,.

  NIReport_Print works in 2009, if I try to print to Adobe.  It is printing with a real printer.

  I have attached the code works and does not work.

  / * print to the actual default printer - CE WORK * /.
  if(!iLocalFail)
  iLocalFail = Report_ErrorHandler (NIReport_Print (iReportHandle, NULL, 1), 'Print report');

  / * setting printer in format adobe pdf to create PDF files * /.
  iLocalFail = SetPrintAttribute (ATTR_PRINTER_NAME, 'Adobe PDF');
  If (iLocalFail<>
  printf ("SetPrintAttribute a % d\n%s\n", iLocalFail, GetUILErrorString (iLocalFail));

  / * create the key for the test of the buffer * /.
  if(!iLocalFail)
  {
  sprintf (caFilenameWithPathInfo, "% sBuffer_%s.pdf", TEST_DIRECTORY, caMyTime);

  iLocalFail = RegWriteString (REGKEY_HKCU, ADOBE_KEY, ADOBE_NAME, (unsigned char *) caFilenameWithPathInfo);
  If (iLocalFail<>
  {
  sprintf (caMessage, "RegWriteString Failed. (\n, error was % d.\n%s\n", iLocalFail, GetGeneralErrorString (iLocalFail));
  MessagePopup ("RegWriteString", caMessage);
  iLocalFail = TRUE;
  }
  on the other
  printf ("print Buffer\n");
  }

  / * THIS WORKS * /.
  / * read a file dummy to get data into a buffer and then print to the adobe printer * /.
  iFileHandle = OpenFile ("c:\\mfgtests\\pdf_tester\\globals.h", VAL_READ_ONLY, VAL_OPEN_AS_IS, VAL_ASCII);
  If (iFileHandle > 0)
  {
  ReadFile (iFileHandle, caBuffer, 50000);
  PrintTextBuffer (caBuffer, "");     / * ' ' for printer due to SetPrintAttribute * /.
  }
    
  / * create the key for the Panel test * /.
  if(!iLocalFail)
  {
  sprintf (caFilenameWithPathInfo, "% sPanel_%s.pdf", TEST_DIRECTORY, caMyTime);

  iLocalFail = RegWriteString (REGKEY_HKCU, ADOBE_KEY, ADOBE_NAME, (unsigned char *) caFilenameWithPathInfo);
  If (iLocalFail<>
  {
  sprintf (caMessage, "RegWriteString Failed. (\n, error was % d.\n%s\n", iLocalFail, GetGeneralErrorString (iLocalFail));
  MessagePopup ("RegWriteString", caMessage);
  iLocalFail = TRUE;
  }
  on the other
  printf ("Print %s\n", caFilenameWithPathInfo);
  }

  / * THIS WORKS * /.
  / * print the Panel, NULL for printer due to SetPrintAttribute * /.
  iLocalFail = PrintPanel (ghMainPanel, NULL, 1, VAL_FULL_PANEL, 0);
  If (iLocalFail<>
  {
  sprintf (caMessage, "error was % d.\n%s\n", iLocalFail, GetUILErrorString (iLocalFail));
  MessagePopup ("Board Failed print", caMessage);
  }
    
  / * create the key for test report * /.
  if(!iLocalFail)
  {
  sprintf (caFilenameWithPathInfo, "% sReport_%s.pdf", TEST_DIRECTORY, caMyTime);

  iLocalFail = RegWriteString (REGKEY_HKCU, ADOBE_KEY, ADOBE_NAME, (unsigned char *) caFilenameWithPathInfo);
  If (iLocalFail<>
  {
  sprintf (caMessage, "RegWriteString Failed. (\n, error was % d.\n%s\n", iLocalFail, GetGeneralErrorString (iLocalFail));
  MessagePopup ("RegWriteString", caMessage);
  iLocalFail = TRUE;
  }
  on the other
  printf ("Report manage %d impression %s\n", iReportHandle, caFilenameWithPathInfo);
  }
    
  / DOES NOT * /.
  / * print the State, NULL for printer due to SetPrintAttribute * /.
  if(!iLocalFail)
  iLocalFail = Report_ErrorHandler (NIReport_Print (iReportHandle, NULL, 1), 'Print report');

  printf ("Done\n");
  NIReport_Discard (iReportHandle);

  It seems that NI_ReportPrint is the only function that has a problem with the creation of PDF files.  WordRpt_Print, PrintTextBuffer, PrintPanel and PrintTextFile automatically create PDF files using the SDK of Adobe.  So I'll use WordRpt and not NI_Report in the future.

  So if you need a PDF file created, do not use NI_Report.

• I use a computer laptop gateway t-series and have problems with driver installation

  Original title: driver installation problems

  I was running a computer laptop gateway t-series that has windows vista installed. I uninstalled vista and installed xp pro on a disc borrowed from a friend.i did not know at the time where the drivers must be installed separately. Not only that, reinstall drive was from dell. my friend has a dell computer. the xp installation went well but I don't know how to proceed with the installation of the required drivers. you have any suggestions on what I can do?

  Hi Speete66,

  ·         What is the exact model of the laptop?

  Visit this link to download the drivers for Gateway Laptop:

   

  http://support.gateway.com/support/drivers/ddaStepMain.asp

  You can also see the following article in the Microsoft Knowledge Base for more information about hardware device drivers:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

  Let us know if this information useful.

• OfficeJet Pro 8610: driver installation fails with an error on hpvyt13.inf persistent 1627

  The printer driver installation fails with:

  Setup error

  Call to DrierPackageINstall returned error 1627 for package
  "C:\Program HP HP Officejet Pro 8610\DriverStore\Yeti\hpvyt13.inf"

  Tried to install base drivers and a full suite as a user and administrator. Also tried a clean boot (close unnecessary services and restart). I went to look for the file in question, but it does not appear to exist (there is no HP directory in Program Files).

  Hello

  This can happen for several reasons, most common duration to a problem with the registry permissions.

  I would suggest trying the following tool, it is a 3rd party utility that analyze and repair registry permissions, and so you can use it at your own risk (I used it several times without any problems):

  http://www.MajorGeeks.com/mg/getMirror/tweaking_com_reset_registry_permissions, 1.html

  Click the Start button and let a few minutes (it may take some time, about 5-10 minutes), the journal stated: "" once it ends.

  Then try to reinstall the HP software and check for the difference.

  If the same continues I suggest contacting HP sopport to continue such troubleshooting.

  You can find the detais contact for your region below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Hope that helps,

  Shlomi

• Driver Installation Failed: Could not find media device for this driver

  I have a HP with Windows Vista (32 bit) dv6646us and have had a problem with the audio device. The sound works sometimes, but above all the system does not even recognize the audio output device (in this case, I see the speaker icon in the taskbar with a cross mark). Another model is that the laptop does not recognize the audio device, but no sound is produced (in this case, the "speaker" icon doesn't have the cross mark). When the system has at least recognize the audio device, I can solve the problem by using the Microsoft Fix it 50131. However, when the system does not recognize the audio device, nothing seems to work. When I go into Device Manager, there is no sound, not just a pilot section. The laptop is supposed to use Conexant High-Definition Audio Driver, but when I try to install it, I get the following message: failure of the driver Installation: Media not found device for this driver.

  In another forum, someone has solved the same problem in a system with the 32-bit version of XP by downgrading his memory from 4 GB to 2 GB, based on his knowledge that a 32-bit system cannot take 4 GB of RAM (it has started having the problem after that first, he upgraded the RAM from 2 GB to 4 GB). However, I don't know if the same applies to my problem because the sound system sometimes works with the current system with 4 GB of RAM and also my laptop is supposed to hold up to 4 GB of RAM (and he does not the 4 GB of RAM). So, I was wondering if there is another possibility for a cause and a solution to this problem.

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         Do you think the audio device when there is no X on the volume icon?

  I suggest you follow the steps mentioned below:

  Method 1:

  You can follow this section "By my speakers is crackled or distorted" in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 2:

  If the previous step fails, uninstall and reinstall the audio drivers completely, follow the steps below:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in r management device, right click on audio and its driver and click on uninstall.

  e. install the last driver audio drivers on the manufacturer's Web site.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Driver Installation module stopped working and was closed

  Hi, can someone help with this error.

  I am trying to install different drivers, but I get this problem "driver installation module stopped working and was closed" and as such, I can not install any drivers...

  Is there a round work or a solution to this?

  See you soon

  Hello
  • What drivers are you trying to install?
  • What were the changes made before the problem occurred?

  I suggest you try to put your boot system minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.