LaserJet CP1025nw on MACBOOK and no wifi

Similar Questions

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• When my Macbook connect to WIFI my normal PC to the internet cut

  First off sorry for my bad English, but as say the title "when my Macbook connect to WIFI my normal PC to cup of the internet.

  I was playing online games (WoW) on my normal PC I opened my macbook to work with her, and then I saw that I was disconnected from my game online so I test a few times and the problem is that whenever my macbook is connect to my Wifi my router send... my PC internet is disconnected (my PC is using cable connect to the router)

  Thanks in adv

  That would be a problem with the way you have the router or computers configured for wifi. It could be that they are all both use the same ip address. Usually, when configuring a router you begin by setting up a computer with cloning the mac address of the computer to the router and then the other set up. If you do not have a mac address on one of your computers, it's the problem.

• The laser color HP LaserJet CP1025nw printer cannot print - points held in the queue

  I am running Windows 7 64 bit and my laser color HP LaserJet CP1025nw printer fails to print jobs in the queue. I turned off the printer accidentally as he was preparing to print a document, and since then I am unable to get the printer to work. I used the HP print and Scan doctor and he said that he had detected and solved a problem with the queue in vain the printer print a test page. What other options do I have? Thank you.

  Rrolley, looks like you have a problem with the print queue of the printer. To start, just to tell you (that you probably think) it is not good to switch off while he's getting a print request. To resolve this problem, I recommend that you turn off the printer and the computer completely and cut the power for about thirty seconds. Then power the two machines back on, and when they started well then try the print job.

  Let me know how it goes and I'll get right back with you!

• LaserJet Pro P1100w: Then my LaserJet Pro P1100 AirPrint phone without wifi connection?

  My LaserJet Pro P1100 AirPrint phone without wifi connection does

  Hello

  iPhones and AirPrint works only via a wifi connection (no bluetooth or other options will work) without a wireless connection any (direct or normal wifi), you will be unable to print wireless.

• I can't get my printer LaserJet CP1025nw of color appears on the installation wizard

  I am running Snow Leopard on my iMac. I downloaded the printer and the file of the software on the HP site. However, when I get to the Color LaserJet CP1025nw Printer Setup Wizard does not appear on the list even though I have just completed the installation.

  Hi Casey,.

  Sorry, had the wrong impression that you use a connection network caused the question sympthoms.

  Please make sure that the printer, USB is directly connected to your Mac and no more than 2 - 3 m long without using a USB hub or extension. It can cause serious communication problems. Please also plug the USB key into a different USB port on your Mac.

  If you have an iMac, also be sure to plug the USB key into a port on the back of the printer and not on the keyboard (like the keyboard ports are not powered and actually provide the same power as the use of a hub)

  On the Mac, click the Apple menu.

  While holding the ALT key, click System Profiler from the menu.

  In the left pane, click USB

  You see the printer listed in the right pane?

  If the printer is not listed under USB, this means that the unable to communicate with him without any problem of Mac software, so I would recomment USB cable it to try another.

  If the printer detected as expected, please let me know.

  Kind regards

  Shlomi

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• LaserJet CP1025NW: Power paper LaserJet CP1025NW problem

  I installed a new LaserJet CP1025NW yesterday and it was working fine. This morning the user was printing and paper began to go through the printer, he proved on the side and stuck. The user removed the book and found a small piece of black plastic that was broken and bent. She has been aligned on the left side of the feed roller bar (the right side has also a.) Part number molded on the part is "RC3 - 0170 1-2» I was not able to find this listed anywhere part. Is it available? Thank you.

  Hi @WadeDunham,

  Welcome to the HP Forums!

  I noticed that you have a broken with your printer LaserJet CP1025NW part. I am pleased to see that for you!

  According to the site http://partsurfer.hp.com/ , this part doesn't seem to be available. Most likely, if there is a piece broken with the printer, the printer itself will need to be replaced/repaired. Please contact HPtelephone support for further assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Color LASERJET CP1025nw - Fuser error

  I get a 'Fixer' error when I print on my printer Laserjet CP1025nw.  I have powerd extinguish by instructions and left HP it goes off and unplugged during the minutes 25 + recommended, but nothing works.  There is a triangle with one! the control panel and I'm sure that has to go.

  Any thoughts?

  Thank you!!! \

  Steveoh

  I found the solution on another forum HP.  The guy said to replace the black toner cartridge and it worked!  He said that it had removed all the toner cartridges and put them back in, but no luck.  Changing the black cartridge has worked for me and him!  My printer is less than a year and I have probably put 2 reams of paper through it, so I'm happy that it worked!

  steveoh

• HP laserjet cp1025nw: cp 1025nw do not print

  Hello

  I just bought a hp laserjet cp1025nw.

  Install the driver using the printing preferences panel.

  When I try to print a file find all ok on the mac, it says it's printing, but all arrive on the printer.

  It just does nothing.

  Tried to delete the driver reinstallation it several times, tried to off/on the printer several times, but the printer does not print anything.

  Any help?

  Is there a utility printer for this model?

  I looked on your support site and it just show firmware update and ePrint app, can't see a utility application in your site.

  Thanks for your reply.

  I solved the problem, I don't know why, but the first 2 times I tryied to install the driver through the apple Printer preferences he made me select the driver hp but not specific for the exact model.

  The third time that I canceled / reinstall the driver it showed me the submenu with the specific parameters for cp1025nw.

  Now it works,

• Dark LaserJet CP1025nw print

  I have a new colourlaser LaserJet CP1025nw. problem is much too dark impression and that's why the cartridges run out too fast, especially the black one. I try to color changes in the settings of the driver, but these changes isn't any effection. I have iMac with OS of Yosemite.

  It seems to work now. Settings of the printer seems to work when the printer is connected with the USB cable for iMac better.

• HP LaserJet CP1025nw - shortcut or Windows 8 cleaning cleaning Instructions

  I have a HP LaserJet CP1025nw, USB to a Vista laptop.  I've had for about a year and a half and am well versed in the issues he has with the error of system tray HP resulting in the impossibility to access the device settings to start the cleaning cycle, which is all I have to do.  I also spent hours on the phone with HP from the beginning without success.

  Is there a combination of keys on the printer, a shortcut, which can be pressed to start the cleaning cycle?

  OR

  I have a second, brand new, 8 HP Windows computer this printer wireless connected to.  How can I access the device for this printer settings in Windows 8 to start the cycle?  For example, should be connected?  Driver full features?

  Solved my problem! Full featured driver on the Windows 8 machine allowed me to access the device settings and start the cleaning cycle.

• color laserjet cp1025nw print streaky

  I get entrelardé & dirty my HP Laserjet CP1025nw color printing.

  Have executed the impression several times cleaning process without success.

  This just happened. He perfectly managed so far.

  Hello newoboz,

  Welcome to the Forums of HP Support!

  After reading your post, I see that you have the LaserJet CP1025nw and it is poor quality printing. Run the cleaning of the printer will usually clear up problems.

  I was able to locate this HP document: print quality problems, it contains 11 steps to help solve this problem for you.

  I hope this helps, let me know if it does not work.

  Kind regards

• HP LaserJet CP1025nw: HP LaserJet CP1025nw color work is not with windows 10

  I have recently upgraded to windows 7 to 10 on a single computer, purchased another and the 3rd was Windows 10 all year that we had.  I have a LaserJet CP1025nw which worked fine until the last few weeks.  The new computer, it is not recognized to install, one that was just upgraded, it is still listed, but it's not working and the laptop which was windows 10, it is printed in the last month, now, without modification, only an update of windows, the printer disappeared and will not re - install.  Attach the USB cord is not working and I checked on the HP site, for more than 5 hours looking for a solution, and even if it is supposed to be updated drivers to download, when I download them, the file for the 1025 installs the drivers for the 1020.  Nothing works and I'm at my wits end.  The printer is not that old, and I have several refills that I would use because I do not use the printer much at all.  Tips for good drivers would be very much appreciated.

  @Tanster , welcome to the Forums of HP, it's a great place to get help, find answers and advice.
  Thanks for posting your request, I'll be more than happy to help you.

  I understand that your HP LaserJet Pro CP1025nw color printer does not work after upgrade to Windows OS 10.

  Don't worry because I have a few steps that should help you to solve this problem.
   
  And here's the step by step guide for you in the links below:
   
  1. update the Firmware on the printer

  2. using your printer with Windows 10
   
  Let me know how it works.
  I wish you a good day ahead.

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple