LCD RED screen

Similar Questions

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• Red screen of death

  iPad Mini 4

  
  

  Last night I plugged it in to charge and this morning the screen was frozen showing the Apple logo. I did a hard reset and thought that this would solve the problem. Unfortunately, shortly after the Apple logo, I got a red screen. The iPad is in an infinite loop and does not boot.

  I tried to restore the iPad via iTunes, but it didn't work. I entered DFU mode and tried not to restore once again, no luck at all.

  My last resort is the Apple Support. I'll take it to an Apple authorized service center and hope for the best.

  What frustrates me is that I have this iPad for 2 months and it was purchased new in an Apple Store. I'm really angry...

  

  AlemaoSlv

  I understand your frustration, however electronic devices can fail for various reasons. The unit is still under warranty, Apple should take care of your problem.

  This is a user to user support forum. If you wish you share your frustration with Apple, then use their comments here, http://www.apple.com/feedback page and click the box in the matter.

• Red screen

  I dropped my iPad 2. It is out of warranty. When I tried to turn it on it started with a red screen with a battery symbol. After a few seconds, he would cycle to a gray, then black screen, then repeat the loop. It would not keep pressed power button or combination home + power or being plugged into iTunes. I left it plugged and after a while the battery symbol has been replaced with the apple logo, but the screen is still red and the infinite loop going.

  I can't find something on this error on iPads and no image like that of my screen. I have a picture but you can't post it here.

  Any help would be appreciated.

  Hello.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

  If this does not help, it is best to make an appointment at the Apple store because it may be a hardware problem.

• Satellite L300 - 17L connected to LCD TV - screen is always black

  Hello

  I have a problem with my laptop.
  When I try to connect my laptop to the TV via the VGA doesn't work anymore. It worked great until a few days before, when I try to connect via VGA and my LCD TV screen remains black.
  So I thought that a problem with my video card driver, so I reinstalled Windows :)),: P, but the problem still persist.

  So I downloaded the latest driver for the video card, nothing new. I checked the cable, I tried with another VGA cable and same problem. When I connect the LCD TV to another laptop it works, if the VGA cable and TV work.
  And I have observed that when my laptop is connected to the TV, sometimes at an interval of 15 minutes it get signal, but this for less than a second, and then the screen turn black. (Each time when I connect the TV I give FN + F5 to set the main screen)

  Any suggestion, I have no more ideas.
  Excuse my English. : P

  I also think that the VGA connector can be responsible for this.
  This must be tested properly, so I recommend you contact nearest Toshiba authorized maintainer and ask for help.

• Qosmio G10 - "noisy" red screen at boot

  I get a "noisy" red screen rather than on a black background while booting. During use, wallpaper is a mass of verticle blue lines.
  18 months ago, I had to replace the motherboard due to lines red verticle - cost of £400.

  Does a similar problem?

  Hmm seems not good boyfriend
  To me it sounds like a graphics card problem have you noticed the same thing on the external monitor?
  If Yes, then the graphics card might be faulty.

• SMP-N100 display only a red screen on startup

  At the start of my internet broadcast camera all I get is a red screen on my TV, no menu, nothing. I unplugged from its power source and restarted the same result. Someone has any suggestions, contacted Sony support virtually abandoned, suggestions here?

  Follow the steps below to solve the problem.

  1 turn off the player continuously and the TV.
  2. disconnect the cable/s streaming player and the TV. (What kind of cable do you use?)

  3 reconnect the cable/s after a few seconds.
  4. turn on the player continuously and the TV.

  If the problem persists, try connecting the player for an another video input of the TV. If still the same, try to use another cable.

  If my post answered your question, please mark it as "acceptable Solution".

• THE RED SCREEN ERROR

  I just bought an all in one HP Pavillion 20 I get a red error screen when you try to restore the system

  HP sent me the 6-disc after following all the instructions this RED SCREEN appears with the jargon of log file

  that I don't understand after a 1 hour on the line with support they tell me that I have to spend another $170,00 for a technician to come to my house? This cost me over $ 700.00 and a 2 weeks pay for me can anyone

  Help me???

  ~ Hi

  How long you have owned the machine?

  Checkurtech

• Receive error "Error of FBI!" with a red screen when you try to restore my HP back to Windows 7.

  What is an FBI error! __

  I tried to install / restore windows 7 Professional on my hp computer that came with win xp pro and win 7 pro. But I get this error message after windows copies the files and start the installation.

  The FBI mistake!
  Summary: Spawn program () fatal timeaction
  Info of the UIA. 945, FBI preos processing error.
  You must shut down the system and return to the command.

  with red screen...
  I tried 4 or 5 times without success... ill be and tired of this _ microsoft, time to switch to mac...

  Any help is appreciated.

  I solved the problem!

  I think that the provided HP recovery partition is small to restore windows 7 and office 2007 (as it is predicted for xp)

  When installing with the restore cd, she lays on the partition that you want to, you can select 1 partition, or score 2 or 3 etc... selected .i 2 partition with 50% of space in each partition and continues the restoration, which has solved the error of the fbi. I installed since January 2010 as it much win 7 hp pcs downgraded win xp (preinstalled). HP have not corrected the problem and yet!

• HP 2311 series LCD wide screen

  HP 2311 series LCD wide screen

  Windows 7

  When I try to turn off my screen with the power button, I get a message "Power Button lockout". When I shut down the system, the screen goes into sleep mode. I have to unplug the monitor to turn off! Where can I find a setting to disable this feature?

  Press and hold the power button for about 30 seconds.

  (If this feature has been enabled, too)

  C.

• Red screen + with driver_irql_not_less_or_equal blue screen

  Hello

  From may, I get crashes on my computer. The first significant accident was when I was playing a game of Warframe where I got a red screen in which nothing is present in addition to the entire screen being red and my computer restarts automatically. I thought it was a face game question so I reinstalled the game and have not so far received a red screen. I received two red screens and between the two red screens, I got a blue screen (I never got before).

  After I reinstalled the game, I had no crashes, pilot at all, not red or blue screens screens. After two weeks, I get another blue screen with error driver_irql_not_less_or_equal. I have not changed a lot on my computer in the past months, so I don't know why it happens.

  What can I do to fix this error? If any other information is needed, I'll do my best to provide.

  Thank you

  Corey Chen

  Hi Corey,.

  Results verified by WinDBG. DumpCHK and BlueScreenView.

  The Bug_Check were USBXHCI CAUSE D1. SYS which is the driver of USB 3.0 and a game controller
  Windows which means something other than the conduit in error.

  BugCheck D1, {18, 2, 0, fffff8800683e73e}

  Probably caused by: USBXHCI. SYS (USBXHCI! TransferRing_StagingDataFind + 36)

  Very often, it is a combination of software and hardware even that creates instability in the system
  and that's the case here.

  1. check with ASRock Support, their drivers and documentation online and ask in their forums
  on known problems. Update the BIOS, chipset of low-level driversand on-board major
  and drivers of different devices (see previous message above for driver update methods). Do not forget
  to search for the updated drivers for all USB devices.

  BiosVersion = P1.00
  BiosReleaseDate = 17/10/2012<- check="" for="" updates="" to="" the="" bios,="" low="" level="" chipset ="" and="" the="">
  device embedded and separate drivers.
  BaseBoardManufacturer = ASRock
  BaseBoardProduct = 970 Extreme3 R2.0

  ASRock - Support
  http://www.ASRock.com/support/index.asp

  ASRock - Forums
  http://www.ASRock.com/support/forum.asp

  ASRock - downloads
  http://www.ASRock.com/support/download.asp

  2 check any USB 3.0 device you installed. Remove to see if the problem persists and
  Try them in ports USB 2.0 as a test. Check with the support of their Creator for known problems.

  3 use ALL other methods in the previously posted answer above.

  4. AFTER all the above (especially updates BIOS, chipset and driver) if the problem persists
  Run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier methods during the previous
  answer above - updates and other methods it is first, or it will find that the same
  info).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to fix a red screen before starting logon

  I have a red screen when I connect. My laptop is sony vaio fw330j. Help, please.

  Hello

  Thanks for posting your question in the Microsoft Community Forums.

  Please answer the following questions for a better understanding of the issue:

  (1) to when was the last time he managed to boot up to the desktop?

  (2) what were the changes made to the system before this problem?

  I recommend to disconnect all external devices except the keyboard and mouse if you use it and then perform an automatic repair from the installation media.

  Steps to perform an automatic repair from the Installation DVD:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  You can also go through the steps in the article:

  See the link: http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode

  If the problem persists, you can contact the manufacturer of the laptop.

  Refer to the link; http://eSupport.Sony.com/us/p/index.pl

  Hope it solves the problem, if you have questions about Windows, feel free to post.

  Thank you and best regards,

• I opened one of my projects of recorded video but all uploaded images display a message red screen "Media disconnected". What is the cause?

  I opened one of my projects of recorded video but all uploaded images display a message red screen "Media disconnected". What is the cause?

  Download means to transfer data from the internet to the computer.

  If you double-click the file missing in the assets of the project, it will open a window saying where is so and so file.

  Navigate to the file and click OK.

  The rest of the files could follow, perhaps brought to them all separately.

• When I import videos, they appear as a red screen ss14

  I use a PC with Premiere elements 14. I am trying to edit videos but when I import the files (.mp4 or .mov files) all I get is a red screen. The audio works fine. This has only started to happen a few days ago. How can I solve this problem?

  Dain

  If you are running 64-bit Windows 10, install QuickTime 7.7.6. It is not the last version, but meets the criterion of Premiere Elements for QuickTime 7. Apple has a problem with QuickTime 7.7.8 (latest version) and 10 64-bit Windows.

  https://support.Apple.com/kb/DL1822?viewlocale=en_US&locale=en_US

  What is the brand/model/parameters of the camera that records what is present in Premiere Elements as red images? When you say that this is happening with all the videos that have been tried, does that mean that these .mp4 and .mov files. If you import images fixed jpeg, how they present?

  My main goal is the integrity of the installation of QuickTime, coupled with these files .mp4 and .mov with red poster (video compression in particular) properties.

  You mention Intel HD Graphics 520 as your video graphics card. The version of the driver has been updated recently? If so and the version of the driver is updated, then Explorer roll back the driver. If the name of the card is not a misprint, please turn off the preference "Use hardware acceleration (works on Intel HD Graphics 2000 and newer)" found Edit Menu/preferences/general.

  Please consider. Questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• Red screen in first/encoder MXF files

  Hello

  I converted a bunch of MXF (C300) images in Adobe Media Encoder. All fine convert except files including audio 10 is correct, but the video is replaced by a RED SCREEN throughout the entire clip. Here are a few screenshots:

  

  I can open these original MXF files in VLC Media Player and they play perfectly. However, bringing these specific clips in the SOUL or first creates the same problem red screen.

  I looked all over the internet for an answer and found nothing. Is it possible to convert these files and import them into first correctly?

  Any any help would be greatly appreciated!

  Hey Kevin,

  Thanks for responding. I copied the overall structure of the file of the c300 images on my hard drive, and then dropped in the individual mxf files in the SOUL. So, it looks that I don't import correctly.

  Is the same thing as Media Browser - Media Encoder?

  Thanks again for your help!