LG ht-dl-st bd - re bg14ns40 not reading discs

Similar Questions

• Qosmio DX1210 - ODD does not read discs

  Hello, I was asked to help fix a friends computer its an
  Toshiba DX1210 all-in-one desktop.

  its about 1 years with no problems until today the hard drive has suddenly stopped reading discs completely it custom similarly recognize that there is a disc inside.

  I know there is a possibility that the laser is broken, but I want to eliminate everything before I propose to replace the ODD.

  ODD:
  HL-DT-ST BD - RE BT11F

  I have looked everywhere for an answer and did everything I learned to do in the past, but nothing has worked.

  I used restore points.
  Uninstalled the driver then rebooted to reinstall it (installation is a breeze and everything works).
  Reformatted your entire computer (created a backup and restored everything after that she did not).

  I'm stuck on this 100% and really want anyone who might have the answer for me or even to suggest something that would be a great help.

  With regards to your friendly IT Junkie

  MSG to the moderators if this is the wrong thread for this, please direct me to the right pair

  Hello

  Have you tried to clean the laser lens?
  Do this by using a fluid tip and alcohol of wadding.
  Be very careful and don't use force

  I had problems reading some discs and cleaning the laser lens has solved most of my problems with CD/DVD player.

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Satellite P200 - 1FC - CD/DVD does not read discs

  I have a Satellite P200 - 1FC ' CD/DVGW TSSTcorp TS-L632D ATA Device will not read CDs or DVDs and do not respond. Device Manager shows that this device does not work correctly.

  Can you please help?

  Hello!

  Try to remove the drive from Device Manager CD/DVD, and then restart the laptop. It work?

  If this isn't the case, you should try to remove the upper and lower filters:
  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• CD/DVD drive does not read discs on Equium A100

  My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.

  Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.

  Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.

  If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
  After phone restart the operating system will recognize and initialize the disk again.
  After this review of the procedure if you can read, write the middle.

• Will not read disc HARD T410

  I recently went to use my thinkpad T410 and when he walks he gave a "HARD drive not found" message. So I rebooted the system and went in bios and tried to run a disk diagnostic check and he just gave a similar message appears saying please insert a disk in the HARD drive Bay.

  I was afraid that the HARD drive itself went bad, but I removed it plugged on my other computer. There, I ran a diagnosis of HARD drive and she returned the entire HARD drive is fine. I think that perhaps it is the connectors on the motherboard of the machine but would like other ideas. Thank you

  If it is still under warranty, call for service. Do not read further. It might be useful to withdrawal of the framework of keyboard/palm-rest and see if the drive is a good physical contact. It must be plugged in all the way. I warn you that the T410 is harder than most of the models to remove the palmrest, and the connector for the touchpad is a pain to connect. If this descriprion scares you, I suggest you take it somewhere. Here is a link to the Manual:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles_pdf/t410_t410i_hmm_en_63y0535_06.PDF

• The CD/DVD drive does not read discs

  Hi, I have a COMPAQ Presario CQ40 with optiarc DVD RW AD - 7561 ATA Device driver, recently the drive does not work properly. It can read and burn the disc, that I already used, but when it's a new (disc white) it does not read the disc.  It has an error message "make sure that the disc uses a format windows recognizes. If the drive is not formatted, you must format it before you use it. "the disc is the format that would recognize the system.  I tried to uninstall the drivers and reinstalled from the Device Manager, but nothing works, tried too much microsoft fixit, always the same.  Hope that there is another work around here... Thank you...

  Have you tried using other burning software?

  Try this free you see if you receive messages.

  http://CDBurnerXP.se/

• E reader is not read disc on my ENVY TouchSmart PC

  I have problems with my DVD/CD is not being played on the e: drive...   It worked yesterday, but last night when I put a DVD in it was not read the DVD... Any suggestions will help.

  Thank you

  Sherry

  Hello

  See if the following makes a difference.

  Open windows control panel, open Device Manager, expand CD-ROM/DVD-ROM drives, right-click the drive and select uninstall.

  Once it finished, open the Device Manager window.

  Click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Return to the Device Manager window and click the "Search for hardware changes" (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• My hard drive will not read discs! What should I do?

  My laptop will not recognise discs I put in the forest of cd! I am trying to install Microsoft Office, and it will not even read the disc! Are there other ways of installing Microsoft Office? Or any suggestions how I can get the t hard drive work?

  Thank you

  Any comments would be much appreciated!

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• does not read disc

  I deleted norton 360 to my laptop, it was exepired and now when I put in a disc it does not read

  Have you used this tool to remove Norton? If not, give it a try and see if it does the trick.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=English&CT=us

  I hope this helps.

• My hard drive will not read discs?

  Hello

  I'm a moderately experienced computer nerd, and today I met this problem I can't solve everything. Late in the afternoon, I noticed that my (DVD - RW) disk drive wouldn't read my drive, so I went to do some testing, (assuming that the problem was the disc) and I found that it would not read any disk I put in it. CD or DVD would work. If at this stage I think it's a problem with the drive itself, so first, I uninstalled the driver for my DVD player and restarted my computer, but that did not work, so I plugged in an external CD player I got earlier. (who has been confirmed to work in the past) And that itself doesn't has the same work. If at this stage I think it's some kind of virus or malware or something of the sort that could prevent any kind of disc. So I did two scans of all of the computer (1 scan Spybot) and 1 AVG scan AVG came up with nothing, and Spybot came with the usual threats of low priority. So I had difficulty all 'threats' Spybot finds it, but it is still impossible to get either of my drives to work. At this point, I'm at my wits end. I'm running out of ideas, and I'm exhausted. So, any help would be appreciated. Thank you! (by the way, I use Windows 7 Ultimate)

  I could finally understand! This idea has just popped in my head that maybe the laser needs to be cleaned. So I veerrry clean gently with one of these sweet rags that come with the latest TV, and I noticed that you can move. So I took a paper clip (just to be more specific about what I might touch) and I moved the whole part of laser to the outside edge of the disc. And then it worked perfectly fine. Thank you all for your help.

• ATA device tsst corp dvd player not reading discs

  My dvd drivers do not read any type of dvd VIRGINS, but it plays DVDs that are written

  I have some writing his and my computer reads those them, but no vacuum

  I have a tsstcorp H493B AND I HAVE WINDOWS 7 driver
  He said of his job very well, but it is still no bed

  I have tried these things

  -uninstall the drive and install it back
  -tried the thing "fix it" and says "the disk drive is not supported.
  -also tried this

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  STILL DOES NOT WORK

  Hello

  If you have tried all of these methods, it sounds like the drive has a problem
  may be due to wear or age, they go wrong.

  "BTW, by"reading"discs, I hope you meant"burn"as a blank disc.
  cannot be read because it does nothing about it. If the unit of optical burning failed
  a black disc is not recognized or burned.

  Try the drive in another computer and try another drive in your computer.

  I hope this helps.

• Windows 8 DVD ROM not reading discs

  Yesterday I installed a few games on Steam, I was playing Saints Row the third while he was busy installing and bit after that I had to restart my PC because it was originally the trolling game. At the next startup, my laptop then got stuck on the login screen, where I put in my password/PIN and it would just sit there and do nothing. This kept going until that of course I had to go in safe mode and use that 'Everything clear, but keep your files' option windows 8 a, and am now able to log in and access my files.

  Nut, now I am faced with a new problem, my DVD ROM will not read and disk I insert in there. It was working fine until I deleted everything, and now I can't use it.

  I tried to use the tool of diagnosis provided by Microsoft for this problem, but it does not work. I should also mention the possibility of editing the registry does not work either.

  My laptop is reasonably elderly, ten months or so, but I doubt that it is only a hardware problem because the DVD ROM shows on my computer and device manager says it works very well.

  Are there other solutions for this or should I just take it back to the shop?

  Hi Taonga,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that the DVD ROM is not working now. I appreciate your efforts toward this problem. It could be a software or a hardware problem.

  1. What is the brand and model of your computer?
  2. What diagnostic tool do you run?
  3. Did you try it with any other DVD?

  You can try all the steps in the below link, it may be helpful when fixing the issue.

  Run this fixit: http://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem is not resolved, then follow the link below.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps to solve the issue. If the problem persists, contact us. We will be happy to help you.

• CD Rom and DVD Rom not reading discs

  Hello

  My CD/DVD-rom is not reading any music cd or a DVD movie that I insert in the drive. I looked in the currency manager and the samsung cdrw/dvdsm-352F material displays a yellow exclamation point. It gives me a code 41. He says that the hardware is installed, but cannot read the device.  Can you please let me know how I can fix this.  Thank you!

  
  

• Qosmio G50 - CD / DVD player will not read disc

  I've seen similar posts on this problem but I have not solved my problem. Sorry if it's repetitive for some.

  My * DVD drive is visible * on my computer, but when I put one * disk in it does not display / run * (it cannot be read).

  I tried to use the automatic thing to delete the files in the upper and lower register. And I tried to reinstall the driver.

  PC diagnostics said the DVD player has failed the test, but is not a solution. Nor can help Microsoft fixit.

  Please can someone help. Thank you

  You can use optical disc as boot device?
  ODD readable disks bootable?