light of Windows

Similar Questions

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• Spectrum 360: Specrte 360 - mute light - 10 Windows

  The muting of the keyboard light is turn on is when I cut it. I tried to reboot several times. Wish it would work.

  There is a fix for this for a machine running windows 7
  http://h30434.www3.HP.com/T5/notebook-video-display-and-touch/my-mute-button-light-won-t-go-on/TD-p/...

  But many are complaining that it does not work for computers running Windows 10.

  Someone at - it ideas?

  * Plug - i7, 8 GB, 64-bit Windows 10, spectrum 360

  Hello @Andrew16,

  Thanks for the quick response!

  If your laptop came pre-installed with Windows 10?  You can try to run the Microsoft push Resetto reinstall the operating system.

  I hope this helps.

  Kind regards!

• HP Stream 13: missing red light on windows button mute 8

  Hello

  I got a newish flow HP 13 laptop win 8.1 64bits

  suddenly, I have no red light on the button mute sound.

  The dumb shows on the task bar and works the sound muted, but there is no red light on the keyboard button

  Any help would be appreciated.

  Thank you

  Thank you, David.

  Well I tried to look for recovery and he gave me HP recovery with the ability to reinstall all software, etc.,

  I could not find how to select only the drivers.

  Anyhows, while looking for how to select just reinstall the drivers, I have neede to do windows update and heypresto red light is back.

  So answer you prompted me, and now we are committed.

  Thank you very much.

• Aspire Switch 10 does not light: 10 Windows Installer failure problem or coincidence?

  Greetings! I have an Aspire Switch 10 originally running Windows 8.1 32-bit with Bing, which is a little less than a year. I had not used for several months, so in the course of a few days had been the installation updates which have been missed, while it was not in use. Yesterday, the update of Windows 10 presented, I ran the utility, which determines whether the system can be updated and then decides to go, despite some reservations about it based on horror stories that others have shared with me. But I thought that the relatively 'new' OS on it mitigate the risk to some extent. Maybe not so much. I'm not a professional computer, but have done enough hardware and DIY software over the past 20 years that I thought I might give this a go with limited risk, but in hindsight should have been more careful because the operating system is rather an essential component of the computer.

  Download was fine, and the installation started and was about 19% when I had to leave unexpectedly for a few hours, so I don't know what happened during this time, or when the installation has stagnated. I went back to a completely black screen and a unit that does not turn on no matter what I try. I spent several hours last night looking and try different ideas on how to at least get it lights up, while I might try some of the other patches. No luck at all.

  I thought I had created a recovery file, but I can't find a flash drive with one, if my memory fails me on creating a file of recovery, or lost it. Anyway, since I can't get the unit running, I'm not sure he would do any good if I had one in hand or bought an Acer.

  The camera has a little less than 3 weeks left on the hub of the manufacturer and is subsequently under an extended warranty from Costco. However, the extended warranty does not cover problems caused by software or applications, so if it is a problem that was probably caused by the installation of Windows 10, I'm stuck with a brick or will continue to try to fix it myself or find a computer local store who might be able to help without the cost more than what I paid for it originally.

  All the advice, assistance, are welcome. Thanks in advance!

  Here's an update on my problem. This morning, I had a live chat with a support of Acer person. After a last-ditch effort to revive my machine from me, the conclusion was what I thought: the BONES disappeared. Fortunately, because the model is one that supports Acer for Windows 10 and my machine is still under warranty, the repair (original reinstallation of the operating system) will be covered by the warranty. The downside is that there is no local service center, so it needs to be shipped to Texas.

  Needless to say I'm going to stick with the original OS as soon as I get it back.

• No amber light in the button walk / stop during sleep, now no blue light when Windows is running.

  The first took place several weeks after a mysterious ailment judgment then "standby mode". Last night, "closing Windows" hung for 10 minutes until that I forced the closure in holding the power button. Now, Windows loads and runs - but without the blue light in the power button.

  I would like to know why, how to fix it and - especially - if it's dangerous. I count on my computer for all of my business account.

  Any help will be greatly appreciated.

  Now, Windows loads and runs - but without the blue light in the power button.

  -> If Windows runs as it should then light is only an indicator of power. You're probably dealing with a faulty LED. Nothing to worry about.

  I count on my computer for all of my business account.

  -> It would be a case of all stored inside the computer records and no external backup? A big accident waiting to happen? If Yes, then this would be an ideal opportunity to review your backup strategy. How your business would suffer if you lost a value one day of data? Value of a week? The lot?

• HP Pavilion laptop TS 14: suddenly unable to adjust the intensity of light 10 Windows

  Just today, my laptop will not let me adjust the brightness and has completely removed the possibility of. I'm running on Windows 10 (64-bit) and even once, just today from nowhere won't let me adjust the brightness. The laptop battery is completely dead (it does not not connected) but this issue has never touched anything. I would really appreciate help with this ASAP as the screen is already damaged enough.

  Thank you

  UPDATE: the laptop has now completely rid of the option to sleep.

  Hello

  Download and reinstall the AMD graphics software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71870.exe

  After reinstalling, restart the laptop and let Windows load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• Desire: orange wireless on hp ENVY light remaisn WIndows 7

  Suddenly I can't turn the key of wirelss of orange. I tried to use "mobility windows" as suggested on several forums, but there is no such 'tile' when I call him.

  Any suggestions?

  Try uninstalling the wireless network card driver and installing the following softpaq

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131072-1&cc=us&DLC=en&LC=en&OS=4063&product=6532322&sw_lang=

  Support for your laptop computer portal is at the following ADDRESS.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&OS=4063&product=6532322&softwareitem=ob-131072-1&sw_lang=

• Printer hp laserjet P1102W wireless light. Windows Vista operating system

  After trying to download the firmware update to enable air print from an I - pad 2, the wireless light is out and didn't once again.  I tried to reset the printer back to the original settings, but nothing happened.  We have a router from linksys E1200 and he worked before you download the firmware without success.  Can the wireless connection be restored?

  Hi shirley_h,

  Rerun the update of the firmware on the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-95176-3&cc=us&DLC=en&LC=en&OS=4063&product=4110396&sw_lang=

• z840: Z840 - 40 minutes to start Windows 10?

  New with Win 10 installed on the internal drive.  The system is sitting with the logo of hp led the drive or just on the screen for 40 minutes more, rest, disabled keyboard (cap / NumLock does not change the keyboard lock lights) before windows "whirli-gig' shows and the lock screen is displayed.»  I added nothing to the HP operating system install.  I have completed the installation, created an account local, rebooted (expected in excess of an hour), then ran Windows Update.  This restart took 3 hours.   Now, I just changed the name of the computer for my small internal computer 5, two printers network that requires a reboot.  I'm still waiting for the lock screen 30 minutes.

  I looked at the structure of the disc and it was flat out WEIRD!.  It is a GPT, with the SYS partition from 300 MB on the disc a concert of empty, then a recovery of 10 GB partition whose drive letter is not editable.  The recovery disc has three entries in the Disk Manager pointing to two "partitions" - one vacuum 900 MB and letters 10 GB recovery partition.

  Ooops, now I have a white screen with system information, followed by the line

  "SERVICE--------------------------------------------------"

  then SN SKU, UUID, Asset Tracking, tag, feature Byte, the system card ID property.

  I guess that means a bad product?

  Should I send it back?

  Turns out being a defective hardware.  (He finally 'abandoned' with the POST error: "fatal MCA 929)
  ("CBO / error LLCO in Core CPU0 671 08864 L2 Cache data read error CPU0" after be turned on for 45 minutes a day.)

  So I got an RMA number, built-in unit upward and he dropped off at FedEx with prepaid labels sent HP.  The next day, they called a refund.  Apparently, since I ordered without GFX card, they exchange any defective units within the first 30 days, as indicated in the web store.  So I had to duplicate the configuration of a new order.

  The bad news was, after a 19-day wait for the new, spent almost 5 days trying to get the thing to work properly (or give some concrete as to info if the problem was software, hardware, defective product, or pilot error) then having to re - order the work station, the price increased by $200 for exactly the same product.

  I am now waiting on a replacement for the z800 croaked again, so it will be probably 5 to 6 weeks from the time he died just to operate the replacement hardware (laptops and tablets do not replace, I ASSURE you) and another month before I get all the apps back, configured and working "as usual."   So a total of 10-11 weeks of much reduced productivity due to a failure of the workstation – think seriously about having a 'rescue' just in case.

  In any case, I guess we get at this as "resolved".

  WMC

• Satellite C850D-11F - 10 Windows driver support

  Well, I have two, no not one but two laptops purchased less than two years by SATELLITE C850D-11F, PSCC2E and they only qualified for Windows 10 update because Toshiba is lazi to update the drivers? I mean Microsoft app gave me green light for Windows 10, but I don't have the green light from Toshiba and support any drivers for Windows 10 laptop computers are less than two years, the Windows 8.1? In the meantime people with Windows 7 computers laptops more than three or four years, no problems upgrading to Windows 10 with their manufacturer's support?

  What a shame to list? You guys from Toshiba in favour only of the NEW Toshiba Windows 10 products?

  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Shame, the last time I bought Toshiba products.

  For the moment just new models of laptops are supported for Win10. I'm pretty sure that Toshiba will increase the support list and more and more models will support.

• Keyboard backlit Y500 does not work after installing Windows 7

  Got a y500, love, installed Windows 7 (experience challenging, but glad I did now that it's done). Everything works like a charm, EXCEPT the backlight on the keyboard. By pressing FN + space does nothing. The keyboard does not blink when starting upwards, either.

  After repeated calls to the line of Lenovo, the responses I get are simply: we don't know why the keyboard backlight lights with Windows 7 installed.

  I don't want to go through the hassle to put Windows 8 on just for the backlight.

  There must be a way to activate the backlight of the keyboard while running windows 7. Lenovo, can you please go to the top of the chain of command to those who are working on updates of pilot and see if there is a way to make it work? Or tell me if I do something wrong?

  TL; Dr: keyboard backlight worked while Win 8 has been installed, put win 7 on, is no longer works.

  I would check the cable connections, the most likely problem.

  You can get a new keyboard on ebay for ~ $40... I'd rather spend than that being without my cell phone.

  http://www.eBay.com/ITM/400543129741?ssPageName=STRK:MEWAX:it & _trksid = p3984.m1423.l2649

  If the link does not work, you can search and Y500 keyboard, but others do not look right.

• Printer Dell 3300 - light USB wireless adapter flashes without connection to printer laser HP 1005

  Tried a few dozen times in the hours to install and sending test page printed is that exit USB flash or printer error light light lights.  Window XP pro.

  Gregg

  Gregg,

  Try to read...

  Implementation of the Dell 3300 wireless printer adapter

  Rick

• How to set the clock for the hours, minutes, and seconds with Windows XP

  How to set the clock for the hours, minutes, and seconds with Windows XP

  I don't know of your question.  If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light".  Windows will not natively display the seconds.

  TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >

  HTH,
  JW

• Windows Defender encountered an error: 0x800705b4. This operation completed because the time-out period night.

  Hello

  I'm a Microsoft Online Customer Service, which contacts on behalf of my client. It lights its Windows Defender and received this error message below:

  «Windows defender encountered an error: 0x800705b4.» This operation completed because the time-out period night. »

  Hello

  ·         You have a third-party security software installed on the computer?

  Method 1:

  If so then try to disable the antivirus and then check to see if you can turn on Windows Defender.

  You can check this link for more information on turn Windows Defender on or off: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Defender-on-or-off

  Note: Make sure that you enable the antivirus once you are finished with the test. If the problem is resolved, you may need to contact the manufacturer of the program for the settings that can be changed or if there are other updates for this program.

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps:

  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355

  Also, try the steps in this article: Impossible to activate the application Windows Defender in Windows Vista

  Method 3:

  Try to restart the Windows Defender service and check if it helps.

  a. Click Start on the start menu, search type services.msc and press ENTER.

  b. in the services window, locate Windows Defender service in the services list.

  c. check that the status is started. If the condition column is blank, right-click on the service and select start.

  d. If you get error trying to force start the Windows Defender service, try to change the Startup Type to automatic and restart the computer.