Lines when I scan

Similar Questions

• Lines when I scan/copy on my printer

  I have a printer HP deskjet 2050 J510 series. I am using Windows 7 on my computer... I have no problems printing from my computer, but when I try to scan or copy something images in black lines.

  I see that you have black lines on your page when copying and scanning. Here's a link below that will help you better with that.

  http://goo.GL/hLaqS

  Let me know if it helps. If there are any other questions, please ask.

• HP Officejet Pro 8600 Plus: vertical line when scanning

  I get a vertical line when I scan using the document feeder.  I do not understand when scanning the glass plate. I need assistance to access the mirror slider.  I raised the lid for the loading of documents, but I couldn't find out how to get under the rollers to clean the mirror. Thank you

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 Plus.  From my experience this is almost always caused by a specification on the thin glass on the side left which is used for scanning using the ADF.  Cleaning of this area as described in the above document should solve the problem.  If the initial cleanup does not resolve the problem, it can help to shine a bright flashlight almost parallel to the glass.  For a line on the left side of the printed page, the place will be toward the front of the printer, if the line is on the right side of the document, it must correspond to a specification to the rear of the printer.

  Figure: Clean the ADF scanner glass Strip

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• Inkjet HP 8600 printer: I get lines to the bottom of the page when I scan but not when I print

  I can receive faxes and print from the computer perfectly but when I scan and send it comes with lines to the bottom of the page.

  I used HP doc nothing helps.

  Hi there @Psych1324,

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that when you scan and fax one page there are lines on the subject.  I'm happy to help you with this.

  Try to make a copy using the glass, then a second using the ADF and compare two copies. Both have lines or not only made using the ADF?

  In addition, it is the document that you used? HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans. If this isn't the case, please do. Special attention to the part where a copy had the lines. If it's the ADF then it's probably something on the glass of the ADF, as the dust, or small sheet of ink, or something similar. Be complete in cleaning up this article and then test with another copy using the ADF, to see if there is an improvement.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• HP Officejet 6600: Horizontal lines when scanning (digital glitch, no debris on scanner)

  Hello, can anyone advise on how to fix the horizontal lines that appear when you use the flat bed scanner (Hp Officejet 6600)?

  This function scan/unit worked well for a year and suddenly breakdowns at each attempt to analyze.  I went through several steps to try to resolve, including zero/restart the printer and the computer.   To clarify, this not a question of debris/ink etc on the bar of the Analyzer or glass; It's a digital bug (see attached image screenshot).

  I can't find many references about it on the HP forums or elsewhere.  If it helps you to offer a response, FYI I use a macbook, which has worked well with this scanner/printer until recently with this problem.  The printer function works fine.  Finally, I just downloaded the latest update from HP for this device through the App Store and it still gives the same error.

  Thank you for your consideration.

  Jamiwa

  @Jamiwa, welcome to the community of HP!

  I certainly hope that I can help you with the unrest sweeping have horizontal lines across your scans to your Officejet 6600, you notice your Mac running Yosemite. To add the steps that you have already tried, here are some of my suggestions for you.

  Try these steps in the following order:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click here to download and install the full function driver: 6600 Officejet HP e-All-in-One Printer series - H711 Full Feature Software and Driver
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers
  6. Try to scan the image

  Also try to make a copy of the front of the printer to see if they also show the flaws.

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  I hope to hear the result! If you wish to testify of my help, click on the "thumbs up" below!

  

• Multifunction Color LaserJet Pro 200: blue line when scanning from feeder not dish

  When I scan from the charger, I get a blue line that spans the length of the document. It does not happen when I scan from the tray. any suggestions on how to fix?

  Thank you

  Hi @Pichopop,

  Welcome to the Forums of HP Support! I read your post and see that you have found a blue line, during the analysis from the ADF. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  There are several models of Laserjet 200 series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. Poor power connections can cause problems of copy and scanning and rejection of the toner.

  Here is a document for the cleaning of the glass and Platinum. You will notice that there are two areas for the glass, one for the dish and the other is for the ADF.

  • Copies, faxes, or Scans have Vertical black and white lines to the exit.

  Do not take into account the model and the title. Proceed to step three: clean the glass and Platinum sweeping.

  Please let me know the results and if there is anything else I can help you. Thank you.

• vertical lines when copying or scanning with my c6180 printer

  6180 all in a print is fine, just copy & fax causes the vertical black line on the side only. site filled with HP troubleshoot process - no change. Can anyone help. printer is about 2 years

  I don't know if this will help anyone, but I had a problem with a black line when fax is received or when copying through my document feeder.  The quality was very good for printing and copying via the flat glass.

  Here's what I did for a solution... copy of the elevator panel to expose the big glass, then carefully lift on the small gray bonbout charger doc Center, this will take a little effort but don't break anything.

  Once up on hinge, put your fingers on the two gray side tabs to lift the next part with the rollers.  This will now expose a small ~ 2 x 9 "piece of glass that has probably debris like mine did.  Clean with windex and closing...

  I hope this helps.  Don't throw it!

  David

• When I scan documents with HP Photosmart 7510 ADF, how can I stop the pages to be marked?

  Hello

  I use a HP Photosmart 7510 (model No. C311a, product no. CQ877B)

  When I scan documents using the automatic document feeder, they are more often (80%) marked left.  It seems to be caused by the wheel which initially grabs the book.  It provokes a black spot of the width of the wheel to be left on the page.

  The mark appears about a quarter turn to the bottom of the page and is about 1/2 cm in height, but is very sensitive.  Sometimes, another brand is left a little further down the page and sometimes these two brands are accompanied by a very reduced, but still noticeable grey banner (again I believe caused by the wheel).

  The brand is very visible not only on the scanned now but also (of course) in the pdf file that result, and since I'm on this printer for things like job applications, it's not big.

  Other people know about this?  If Yes, is it possible to fix it or must return the defective printer?

  See you soon,.

  silverShnoop

  Hello silverShnoop

  Such problems can sometimes be caused by dirty rollers or the parts of the ADF (automatic document feeder). The following instructions (whereas for a different problem) contain instructions for the cleaning of the AAD.

  The ADF (ADF) captures no paper

  There is another article that could help as well. It contains instructions for cleaning the scanner glass.

  Vertical stripes, lines or streaks in the Copies or Scans

• Red vertical line on copy scan/auto auto

  I have an all-in-one PhotoSmart 7510.  I have had this unit for several years, but only recently, and only in autoscan or auto-copie mode, make a red vertical line down the scanning or copying.  This problem does not exist when I place the original document directly on the scanning bed.  I have not found a solution online that addressed this issue.  Just for fun, I tried the solutions in this document, http://support.hp.com/us-en/document/c01791053.  However, none of these solutions worked.

  Hi ericellman,

  When you leave the cover and look at the glass to scan there is a large glass panel that is the dish. On the left, you will see a strip of glass that is separate from the larger piece, which is the glass of the scanner for the automatic document feeder.

  I would like to know how it goes!

• page black when I scan HP Office Jet 7310. I use an IMAC w/maverick 10:9

  Can anyone offer a recommendation to solve my problem of scanning? My HP 7310 all-in-One was analysis very well, however when it scans now, the page is all black with lines. I don't know if the problem was created when I upgraded to Apple Maverick 10:9. Help!

  Hello

  Click the Apple icon, then software update, make sure that you have available HP and Apple updates installed.

  Scan using picture Capture or Preview as shown below, the HP scanning software is not compatible with the Mavericks and can provide unexpected results:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• Vertical lines in messages scanning and fax on HP 6500 a

  Hello

  I have an Officejet 6500 has everything in one.

  In recent weeks, when I scan a document, the only result I get is in black mode (black vertical lines all over the page).

  If I use the scanning color mode I get all the lines of color on the page.

  Is it a material, problem with the lamp of scanning or something else?

  The machine is around the age of 5 months.

  Someone at - it an idea?

  The same for faxes, the same lines will appear.

  This is the main reason why I guess it's a hardware problem.

  Any comments would be useful...

  Thank you very much

  This could be a hardware problem and maybe also a problem of glass dirty scan.

  * First of all, I would like to try to reset the printer:

  (1) unplug the unit while it is turned

  (2) unplug the other end of the power cord from the wall jack directly

  (3) separate the power cord from the power brick in the middle of the string

  (4) wait a minute

  (5) unit rear cap for a direct decision-making power, not a surge protector.

  If the lines continue, then try the steps in the document for lines/stripes in scans/copy/Fax.  Click here and select the blank copy for troubleshooting option, in this case.  Let me know how it goes.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.