Load = nearly black screen?

Similar Questions

• Firefox does not load properly, black screen says tis websit does not provide any identity information

  I can't load firefox, all I get is a black screen do not know how it happened. Can you help me?

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Windows load with black screen and does not start after windows updates

  Original title: load windows normally screen will not continue

  I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

  Hi Burton089,

  Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
  See perform a repair Installation
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista does not load a black screen with arrow

  Windows Vista will load only a black screen with the white mouse arrow.  I can move the arrow but by pressing the keys (including ctrl-alt-del and ctrl-shift-esc) does nothing.  The only way to turn off here is to press and hold the power button.  Same thing in safe mode.

  I tried the "Repair your computer" option (F8, or from the Windows DVD).  The Startup Repair option says that he finds no problem.  There is no restore point on the computer if it is not an option (it isn't my computer, the person who owns it is said that there should be a restore point, but if there is, the computer can't find it).

  The Dell (F12--> Diagnostics) system diagnostics found no problem (I'm sure this isn't a hardware problem).

  I tried to do a "repair installation" as in Windows XP, but this isn't an option in Vista.  The closest thing is an upgrade installation (boot from the Windows DVD, select install, upgrade).  But this option is grayed out, and he said to level I have to start the installation of Windows.  But of course Windows won't load.  Very smart Microsoft...

  The only option left is to do a clean install.  All programs and files are saved if we have all the data.  It will be just to save a lot of time and hassle if I can avoid it, and I'm surprised that such a feature/option useful XP has disappeared from Vista.

  Any ideas how I can fix this without having to do a clean install?  Thank you!

  Hello biznatch.

  Thanks for posting on the Microsoft answers Community Forum.

  Unfortunately, after trying a startup repair and hovaing, restore points is no longer to go to resettlement is all that remains to be done.  Excuse me, but this is what must be done.  It is excellent that you have already backed up your important information.

  Thank you
  Jonathan

• Windows Vista does not start. The BIOS loads then black screen with blinking cursor.

  So my friend told me that his PC was not working. When you press the power button on the pc, the screen of the Dell BIOS load but instead of starting then Vista it shows just a black screen with a blinking cursor. Still, the BIOS detects the hard drive and has the ability to boot from it, but it just that again. I tried the recovery disk windows, and when you click on the "Repair" option when it loaded usually shows a list of the operating systems installed and their hard drives. There is no listed on the Vista recovery cd. Manually, you can browse and find the partition from the OS than its sequel, and clearly see the windows directories. It all simply not start, nor let the recovery disk to fix it because the operating system is not detected. I plugged the hard drive on my pc with the same results. Then I started my Win 7 and Explorer, disks and partitions are once again still visible with the appropriate directories. Windows says the drive is working properly and has no file system errors. When viewing in the hardware Manager, he says it's healthy (primary, active partition). My hard drive working correctly says healthy (boot, pagefile, primary partition). Why used it boot and why the recovery disk not recognize the operating system and how can I fix it or do I need to format and reinstall vista?

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

• Windows did not accept the new updates and now still load with black screen and mouse rather than launch windows LOGIN

  
  

  Ideas: Troubleshooting/System Restore/Driver Updates

  • Troubleshooting took an installation point so-called drivers but never completed
  • System Restore worked initially but has now got to a point where he restores to where it will be updated and currently not load new windows
  • Recently replaced the hard drive in this laptop with a new copy of windows 7. Corresponding model
  • The only thing I have not tried is reinstalled, but then even if I did that would stop this from happening?

  ,

   
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 3.
  Step A.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 3.
  I recommend you to restore system using a Windows 7 DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
  
   
  If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lenovo black screen randomly Y50-70 times

  Hi everyone I have a very strange problem with my laptop. Here's the Specs (copy-pasted from amazon because I'm lazy):

  Lenovo Y50-70 39.6 cm (15.6 Zoll UHD IPS)
  Intel Core i7-4710HQ, 3.5 GHz
  12 GB OF RAM
  Hybrid SSHD 1 TB (8GB) NVIDIA GeForce GTX 860 M / 4GB

  Since I bought it (about 1 1/2 months of passes) after I installed Windows 8.1 and improved to 10 I sometimes get a black screen, no cursor as has happened repeatedly after upgrading to w10, always helped restart and everything was brilliant.

  The thing is that my screen will not turn off, it's all black, but always on (visible by the light light is always built). It started to happen very rare, perhaps after a week or so, but today I get the problem constantly with different models:

  through normal startup:

  -Start-up of the PC-> black screen

  -Start-up of the PC-> "LENOVO" appears-> black screen

  -Start-up of the PC-> "LENOVO" appears-> Windows load-> black screen

  -Start-up of the PC-> "LENOVO" appears-> Windows load-> welcome-> black screen screen

  -Start-up of the PC-> "LENOVO" appears-> Windows load-> the Welcome screen->-> connection-> black screen

  -Start-up of the PC-> "LENOVO" appears-> Windows load-> the Welcome screen->-> connection-> after a random time: you guessed it - black screen

  The list is repeated several times today which made me crazy enough then and now, also restart does not power more...

  The same phenomenon occurs during Advanced Start (the small button to the left of the power button), even when I asked for a Startup Recovery. It works well is that during safe mode.

  I tried several things, such as the removal of the Intel graphic card, which gave me access to the normal mode of the system. Here I have updated the BIOS to 3.0.3. Now, I'm testing the Nvidia Driver (relocation etc.). Interestingly, I have observed a disturbing "PnP-screen (standard)" which had a yellow flag next to it in Device Manager, although no second monitor is plugged into the machine. Maybe it's the a boring me severa hours today.

  Also, I am plugged to my TV right now which helps me get at least a photo. During this State, there are also 2 'pnp front (standard)' listed in the Device Manager, none of them with the flag...

  Guys do you know something about this problem, anyone has stumbled across it too much and THE TIPP to save me and my sanity?

  Kay, gentlemen.

  After calling amazon (seller) and Lenovo and "help" from a friend, I decided to return to win8.1. I reinstalled the drivers, settled everything back the way I needed her, saved our day by finding our Starbound universe still exists and! No black screens no more. It seems that this unit has still some problems with the operating system most recent Microsofts then Yes, I'll wait... even though I liked 10... :/

  Cases can be considered resolved and thanks for everything the world where with me on this quest. Cheers on you guys!

• Black screen showing F2 set up and start up F12 on the Vista Start menu and saying "no boot device."

  Original title: Windows Vista has stopped working

  I turn on the computer and Vista will not load.  Black screen that shows set up F2 and F12 boot menu.  Then after a few seconds it says: no boot device.   I know not if I reinstall vista with a disc, then it will be a new installation.  I lose all my files and documents?  Is it possible to recover?

  Hi Ladybel,

  You must contact the Local tech-store and check the hard disk for errors.

• Black screen with flashing '_' in the upper left corner.

  Im running Vista 64-bit Home Premium and recently ran chckdisk because the computer found some "bad sectors" and prompted me to run. After reboot, the computer loads the image in which I can press "delete" to enter the bios (which I do), then press "tab" to go to the post OFFICE (which has no effect and always load the black screen with a '_' blinking at the top left. If I do nothing, the black screen with the '_' blinking always appears after the image. I can't start in safe mode or access the "Advanced Boot Options". The only thing I can do after the black screen is press "ctrl alt del" in which the same process begins.

  I bought my computer from online retailer so it did not come with any CD to restore/recover...

  Hello

  1. did you of recent changes to the system?

  Check her unplug all devices external (except keyboard and mouse) and if you are able to boot.

  If this isn't the case, I suggest you contact the manufacturer or retailer for a Windows Vista Installation DVD.

  Once you have the DVD you can try to perform the Startup Repair.

  Method 1: Run a startup repair.

  (a) Insert the disc.

  (b) restart your computer using the power button on the computer.

  (c) If you are prompted, press any key to start Windows from the installation disc.

  (d) If your computer is not configured to boot from a CD/DVD, check the documentation that came with your computer. You may need to change your computer's BIOS settings.

  (e) choose your language settings, and then click Next.

  (f) If you are using the Windows installation disc, click Startup Repair. (g) click ok when you are prompted.   Follow the steps in the link to perform a startup repair. http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope his helps.

• Vista black screen after the loading bar

  I have the problem that I am assuming that almost all users of Windows Vista have probably experiences - the black screen with the white cursor lonely after the loading bar 'Microsoft Corporation'. Here are the steps that I tried to solve the problem, but have not yet worked:

  • With the help of "last known good configuration" brings back me to the screen and the white slider
  • Go into safe mode which brings back me to the screen and the cursor
  • Activate the video mode low resolution which brings back me to the black screen and a cursor
  • Using Ctrl + SHIFT + ESC to appear during the black screen Task Manager
  • CTRL + Alt + Delete does not work on the black screen
  • I do not have access to the installation CD, as it was preinstalled on the computer

  Yes, as usual, what happened after a windows update - I really should stop waiting for something good to these updates.

  I'm under the original version of Vista Home Premium without service pack - these caused a similar problem, but at least I was able to return the system restore.

  Thank you in advance, I know how useful these forums can be.

  Yes, a new installation of Windows 7 was the way for me. Lucky he composed a back all my documents, however. Thanks for the help all. Unfortunately I have no where near more closely to solve the problem, then when I started.

• Satellite L300 has only a black screen and will not load.

  Mobile hit child around keys shortcut if, Esc, cap locks, fn etc loading upward on the web, top computer laptop has black screen and then tried to load up.
  See screen for a moment and then is become black and now the laptop starts but the screen is black and nothing else happens.

  Can someone help

  Thank you
  Tony.

  Hello

  You mean that you are not able to access the BIOS?
  Have you tried to use the FN + F5 key combination to switch to view different devices? Select this check box. Maybe the output display has been switched to external monitor?  :|

  If nothing will not help to remove the battery and disconnect the portable AC.
  Wait for about 1 hour then reconnect both sides and try to turn on the laptop.

• Windows Resume Loader black screen on HP Pavilion dv4-2145 dx laptop Windows 7

  I have a HP Pavilion dv4-2145 dx laptop with Windows 7. After pressing the button "on", the logo operation windows says its "recovery" windows, but a black screen titled "Windows Resume Loader" appears with the following message:

  The last attempt to resume the system from its previous location failed. Attempt to resume again?

  With the 2 following options:

  1. continue with system summary, (which does not work and I end up with the resumption of the "Windows" followed a blank black screen...)

  2 Delete restoration data and proceed to system boot menu (I haven't ' truei stops because I wasn't sure what that meant)

  But I managed to go to the reviews section diagnostic systems and it seems that he pass all 5 of the test, including hard drive and memory, poster, etc. So I don't know what the problem...

  Please notify.

  Thank you very much!

  Hello

  I think that in this case, you will have to choose the second option - "Delete restoration data and proceed to system boot menu" and see if that fixes the problem.  If all etc. documents you had open before hibernation were saved, then you should not lose anything.  If there are unsaved changes (for example if you have added to a document), the file will be to the point that his last record and you lose additional data.

  Kind regards

  DP - K

• MacBook Pro 15 10 bootcamp load black screen Windows

  When I try to load windows on my computer 10, after stopping the wheel spinning, I'm left with a black screen and occasionally the cursor. I was wondering if anyone has a solution because I'm very reluctant to release zero/restore my windows partition as it was working fine before the next time I turned on the computer and other forums seem to lean toward a display problem. Thanks for any help

  Do you have any active Windows automatic updates?

• G62 b90 - ev: black screen after Windows loading

  Hello everyone, as you can see by the title I get black screen after loading of Windows at the same time as everything else works (hard drive of fans lights and sounds). I've tried several things, I read on troubleshooting thread, memory, diagnosis, diagnosis of hard drive, delete and change put the Rams, disconnect the battery and ac and keep the power button for 30secs hurry the ac without the battery but nothing. I also tried to use a monitor with hdmi cable but I get a blue screen when I try with the monitor. Also what happens during a format so I can't even through safe mode. IM really waiting for your answers and in the hope of a solution. Thanks in advance!

  Just because you use the key F11 to restore to factory does not mean that the recovery partition itself is not altered.

  Suggest you try instead the recovery discs or take it to the shop for advanced diagnostics.

• Windows XP Home, black screen after loading screen (seemingly unique problem)

  Hi all

  I am trying to upgrade to service pack 3 Windows XP home on my old computer from eMachines T2838 and experiences a @# *! a time to do it. This is the third time in 2 days I had to wipe my HD and re - install XP, because of some problem installing updates which has damaged the operating system.

  Here's my current situation.

  Yesterday, after the failure of the HD for the second time (computer got stuck "performing cleanup" on SP2, forced a reboot, got a restart loop after, would not load Windows) I installed XP, update to SP2, then downloaded the service pack real itself. He has installed fine and asked me to restart.  I respected that, and the computer restarted. As soon as the "Loading" screen popped up, I knew that something had gone wrong.  When I started on the desk, I was stuck in 640 x 480 w / 4 - bit color graphics mode. Could not be set. So, I thought, okay, let me reboot Windows and see if he "rediscovered" the integrated video card. Well, I restarted, and the "loading screen jumped into the appropriate color mode / resolution, so I thought that I was in the green."  Well, after that, all I get is a black screen. No message 'No signal!' or anything like that.  Even tried a few instructors that I have. Looked around online, has seen the references to "Last known good Configuration" 'safe Mode' etc etc.

  I tried all the options on the list of F8. Either she freezes at Mup.sys xxxxxx or boots up to the loading screen and then goes black after. I can hear the HDD does it's thing for a bit, so I don't know it is loading this screen "check to activate the automatic updates" which appears after SP2 is installed, but I can't.

  Use the recovery console, (did the repair option the first time after it kept restarting, Windows took 5 minutes to start an IE6 get locked every opening, so had to wipe and re-install) typed "chkdsk/p/r" and he did his thing for about 30 minutes, rebooted and still have the same problem.

  I don't know what else to do. I REALLY want to redo everything this a fourth time, only to to have screw it up once again, and I don't know how many times I can use the key I have on the back of the computer.  (Using a retail disk and an OEM key, Finder product key changer.) -A Microsoft Support Officer showed me that one. Quite handy.

  People do you have any suggestions?  I would really appreciate it.

  Hello

  Try the steps listed in the link below and check if it will help: computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503