Loading with Satellite C650 problem - SOLVED

Similar Questions

• Temporary solution to load problem with Satellite C650

  I here provide a temporary solution to loading with Satellite C650 problem, which I have faced.

  First of all, I've updated my BIOS. After that, I removed the battery and plugged AC for 2-3 minutes.

  Then replace the battery and it loaded.

  However, the battery got charged up to 99% only and after that the interrupted load and the load remained at 99% and renewed battery indicating "plugged in, not charging."

  Therefore, each time I hv to repeat the procedure above to charge my battery.

  If any1 has the solution to the prob. above, it would be gr8 to hear.

  Thank you very much!

  Thanks for your posting.
  To be honest I really don t know what else you can expect and test it with new battery.

  I think that your laptop model must always have a warranty valid, right?
  If so, contact Toshiba nearest service provider and ask for replacement.

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• Satellite C650 problem with USB ports

  Hello

  I have a problem with my laptop, with my USB ports.

  A few days ago, I plugged my mp3 to charge its battery. I did when system Windows began and after a few ports seconds has stopped working. They work for one to five minutes after starting my computer, but only after my laptop's turn off for a few hours at night for example.

  They work fine and all of a sudden we hear the sound of a disconnected device and usb ports turns off. I tried many solutions but nothing worked. I removed all the USB ports in Device Manager.

  I checked in the BIOS, but everything seems to be okay. I tried to disable the disconnection of usb ports to save energy, nothing. Tools that have been provided by Toshiba to check hardware see as usb ports work correctly. Only usbdview program sees as unknown device, I tried to uninstall it through this program but still nothing.

  You have an idea, what could happen? Or if there is no possibility to fix without service visit?
  I would appreciate your help.

  Hello

  Have you tested these ports USB plug a USB mouse or a USB keyboard?
  These devices work properly?

  I don t think you need a visit to the service.
  I think that it s just a software problem
  Given that the USB ports are controlled by the chipset, I would recommend reinstalling/updating the chipset driver

  The alternative is a bit drastic, I think about the recovery of the laptop...
  It might be possible that the registry has been confused upward or some 3rd party software preinstalled on the laptop could affect the USB ports.

  I remember that my USB ports do not work after installing iTunes.
  I had to reinstall the operating system once more to get the USB port work even more funny is that I installed iTunes once more and USB worked correctly

• Power supply with Satellite M30x problem

  When I connect my Satellite M30X in power, he sometimes shows the power light and the battery light. It can then be turned on and will start and run.
  Most of the time the power light blinks and the battery light stay out: it will not illuminate.

  When it turns on, it will work for a period of a minute or two till about 4 hours and stops randomly.
  Now the led starts flashing and continues to Flash while it is powered.

  There must be some problem with electronic control gear. Strange is that this problem occurs from time to time.
  Sorry, but if you want to get rid of it you must contact Toshiba service and let check your laptop.

  To be honest, it can happen that
  Entire motherboard must be exchanged, and it can be quite expensive. Might be time for the new laptop computer. Satellite M30 is really old.

  What do you think of all this?

• Recovery with Satellite L300 problem

  I have a problem trying to restore my laptop Toshiba Satellite L300 to factory settings back!

  OK so basically, my laptop Toshiba Satellite screwed up and I even turn the thing!
  After a while, I was able to 'Restore factory settings' and then after typing my name and my Pc name etc., and after the latter had analyzed what it scans, it says "step 2: finish Prcoess Installation may take several minutes.» Do not interrupt or stop ' or or whatever it says...

  Anyway, I don't know, but it seems to be stuck on this screen! I left it for like 30/40 minutes and it always did, so I turned it off by the button. Now when I turn it on, I can't do anything until there finishes this installation, but when I try to leave it, it doesn't do anything!

  Help, please!

  Additional details
  I don't have a recovery disc! I restore or retrieve or another of the original on the HARD drive when you press F8 at startup to the top

  Any help appreciated

  Thank you, Andy

  Post edited by: ADMIN

  Hello Andy

  Unfortunately there is not some sort of magic bullet. A recovery facility works or not and there is no way to make it work somehow.

  What you can do is to start the installation of recovery even once, if possible. Please do so and send feedback.

  To be honest I don t understand why you didn't create Toshiba Recovery DVD s advice. If something goes wrong with the HARD drive or HARD drive recovery image can not be used you will be able to use recovery DVD for installing the OS.

• Audio driver with Satellite A200 problems

  I installed XP + SP2 on a Satellite A200 successfully. I have downloaded all the drivers from the official site, but even though I installed the drivers for the sound card, the system does not recognize a sound card, no indication of speakers to the taskbar. Also, I installed the driver for the modem, but under the control panel modems, there isn't any modem.

  Hello

  I also had this problem on my Satellite A210.
  The problem was that I didn t install two important patches from Microsoft. * KB888111 and KB835221 *.

  This patch must be installed before installing the audio driver.
  If you have already installed the audio driver please remove TI (remove the soundcard from Device Manager).

  Then, install the patches mentioned and after reboot short you could follow with Realtek sound driver installation.

  This helped me and I'm sure he will also help you 100%.

  Goodbye & good luck

• Satellite C650 problem battery charge.

  Hello

  I have a problem with my charge battery.
  Windows system sees the battery and shows that the power supply is connected, but it also gives the message that the battery is not supported.

  Led indicating that the battery is charging does not illuminate. In order to charge my battery I have to disable notebook, unplugged my power supply, remove the battery and place it again once and after that my battery is being charged.

  My question is what is the problem?
  Would be - this defect battery or motherboard?

  Thanks for your help
  SzAkaL

  > My question is what is the problem?
  > Could it be the battery or the failure of the motherboard?

  Hard to say. First of all I recommend you check the version of the BIOS.
  Do not forget that your BIOS is up to date.

  But have you noticed this problem since the first day of use?
  Theoretically, the battery must be detected even if the battery is dead so I m wondering why the battery led is not ON. If the battery could be charged, the indicator must light up orange. If the battery is fully charged, the indicator should switch to blue.

  In any case, I think that you cannot run a few test because you don t have important and necessary tools, I think that the new battery should be tested with Notepad and if this would not solve the problem, the motherboard must be tested also.

• Keyboard and beep on startup with Satellite A80 problem

  Satellite A80 continuous beep on startup after the keyboard does not work. He writes only

  Post edited by: habib00

  Hello h,.

  I suggest you to bring your machine to a local service partner, or at least by a technician who is familiar with toshiba laptops, because your question looks quite related to the material.
  Someone pour some liquids above? I had the same problem a few years ago that my sister pours coke on the keyboard of my satellite 2430. :(

  Would like to hear a response from you :)

  Welcome them

• battery Toshiba satellite c650 problems

  the time of battery icon remaining never fails when I go over it. It remains the same for example 41% until it turns itself off.

  the only way to tell how much it has recharged is restarting.
  I hope someone can help. Thanks sue

  Hi Suzanne,.

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Solve battery problems

  For reference:

  Battery meter: frequently asked questions

  What is the precise the battery meter?

  Hello

  Thanks for your response, I looked at the links you sent,.

  but nothing seems to help. I think it needs a new battery.

  Sue

• Digital camera with Satellite L30 problems

  Recently bought a Pentax digital camera.

  When I try to view pictures taken with a camera on my L30, a message appears "locate and install driver software.
  I click Yes, another message appears - insert disc that came with your Pentax camera, what I'm doing.
  Finally another message - cannot install Pentax Optio M40, Windows is not found software driver for your device. I visited the Pentax site and contacted them and they told me that if I (preloaded) OEM of Windows I have to contact my computer manufacturer because the OEM versions are adapted to the computer on which it is installed.

  Where is can this question - anyone help?

  I'm really confused and I have to say that Johnny is quite right. Part 3 producers of software must adapt own software for the most used operating system. Hardware manufacturer has nothing to do with these programs.

• RAM with Satellite P300 problem

  Hello

  My P300 has 4 GB of RAM, integrated, but Vista says he uses only 3065MB, although the information shows 4GB system memory available.
  No idea why?

  Your satellite P300 Vista SP1?

• Phoenix BIOS with Satellite 1130 problem

  Dear Sir / Madam,.

  I've recently updated my BIOS but now for some reason any my USB controller is showing an error code 10 in device manager on XP Pro! Microsoft says I need to turn off the feature BACK USB in my BIOS, but I need a password to enter and never went in the BIOS before.

  Please can someone help me as its driving me crazy and the laptop wont let me use USB connectors at all.

  I hope someone can help,

  Kind regards
  Gary

  Hello

  just you don t know how to go into bios? Usually, you should read the manual how to go into bios, but I can quickly tell you how to enter the bios:

  At the start of the system just press 'F2' and you will get to the bios screen. Then you should what the value by default, save and exit. If there are a few options with thing as "usb legacy etc...", then turn it off and get away with saving the configuration of the bios.

  Should work, if not I suggest you perform a bios update.

  You can get the latest version of the bios here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  In case of additional questions just give a few comments
  Welcome them
  Toshiba - download drivers:

• Loading with EPMA data problems

  Hi all
  
  We have the following types of data records to load planning... We use epma 11.1.2.1. And I'm trying to load data from flat files to essbase
  
  
  
  83 PERCENT, ABC, XYZ, 6 JUNE 00
  
  83% ABC data should be against a smartlist account,
  
  XYZ - a text data against account Member
  
  05/06/2006 - a date data against a member account. Please let me know how to do this using essbase...

  If you save the data in a form, and then retrieve the value of the essbase database using Smart View or the add-in, and then you will see the format to load in.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Problem with portable Satellite C650 of load

  Hi all

  I have some problems with my laptop Satellite C650 charge.

  When the charger is connected to my laptop, the battery shows "plugged in, not charging". Furthermore, the battery charge decreases or increases when the charger is connected to my laptop.

  But when I remove the charger, the charge on the battery begins to decrease. For now, I have maintained the charge on the battery to 83% (to always plug my charger for laptop) so that I can work on my laptop at all times.

  I can't decide if this is the problem with the external charger or battery inside the laptop.

  Please please suggest me how to solve the problem.

  Any suggestions would be much appreciated.

  Thank you.

  Seems that you have already solved as posted in the other thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=254051